Best Intake for a V6

JCali · Post by **JCali** » March 1st, 2003, 3:39 pm

I'm shopping for an cold air intake...what's the easiest to install and the best performance. Jason

mx34u2nve · Post by **mx34u2nve** » March 1st, 2003, 5:17 pm

AEM!! i like it it looks super good, and you can feel it.

Mnemonic · Post by **Mnemonic** » March 1st, 2003, 8:01 pm

im sticking with PRM good quality not so loud as to annoy you and you will notice a diffrence plus you dont have the ugly mushroom in engine bay

curtklze · Post by **curtklze** » March 1st, 2003, 8:47 pm

<blockquote>quote:<hr>Originally posted by mx34u2nve:
AEM!! i like it it looks super good, and you can feel it.<hr></blockquote>Is the AEM a COLD air intake? I thought it sucked in air from the engine bay, not cold outside air.

JCali · Post by **JCali** » March 1st, 2003, 9:43 pm

I know this might be a stupid question...but could a small intercooler work better than intake?

VizualXTC · Post by **VizualXTC** » March 1st, 2003, 10:00 pm

All an intercooler is for is to lower the temperature of the intake charge. The only reason it's used on a turbo/supercharger setup is because the turbo and SC heat the air. If you put an I/C on an N/A engine it would only be able to cool the air to the temperature of ambient, but then you are already taking ambient air into the car. It would be basically useless.

MrMX3 · Post by **MrMX3** » March 2nd, 2003, 2:51 am

since when did aem make an intake for the mx-3?

mx34u2nve · Post by **mx34u2nve** » March 2nd, 2003, 3:58 am

My aem intake is custom made from an intake off of an INTEGRA its a cold air intake,

ghandi1981 · Post by **ghandi1981** » March 2nd, 2003, 5:04 am

i bought the stuff to make the home depot cai...but i was wondering which filter to use....i just bout a ractive filter(plain one)...but was wondering if the ractive heat shield one would be better....or would it restrict the air coming from under the car....aj

khas · Post by **khas** » March 2nd, 2003, 8:26 pm

I bought a k&n 3.5" for the home depot intake.Not so loud till on the highway,there i can fell the difference!

David Coleman · Post by **David Coleman** » March 2nd, 2003, 9:30 pm

Moved to the correct forum.

mx3man83 · Post by **mx3man83** » March 4th, 2003, 2:09 am

I dont really like the PRM intake, its not loud at all. Well, i heard it on my friend's probe KLZE. Wasnt' any louder than stock. Of course, if you like it quiet, then i guess that'd be the best..

mattster · Post by **mattster** » March 4th, 2003, 3:04 am

my intake is as noisy as it gets... much growl. i never noticed how much more noise it made until i put it back on last week after a long winter with it off. oh yeah custom is the best because its cheapest. check out my website for pics.

codyhoover · Post by **codyhoover** » March 9th, 2003, 3:11 am

Sound is a form of energy. So that sound coming from your intake is energy loss that could be going to your tires. HKS and Weapon R may sound cool but they will not give you the same results as the PRM.

mattster · Post by **mattster** » March 9th, 2003, 4:14 am

MX-3.com

Best Intake for a V6

Best Intake for a V6

Re: Best Intake for a V6

Re: Best Intake for a V6

Re: Best Intake for a V6

Re: Best Intake for a V6

Re: Best Intake for a V6

Re: Best Intake for a V6

Re: Best Intake for a V6

Re: Best Intake for a V6

Re: Best Intake for a V6

Re: Best Intake for a V6

Re: Best Intake for a V6

Re: Best Intake for a V6

Re: Best Intake for a V6

Re: Best Intake for a V6