MX-3.com

I was lookin at a site that had engines for hondas,acura,etc..1.6L with 185hp and 1.8L with 205 hp,Why cant we put that many hp into our car without major mods. <A HREF="http://www.mmrusa.com/streetweaponCAV.htm" TARGET=_blank>http://www.mmrusa.com/streetweaponCAV.htm</A> <BR>ck out the site and let me know what ya think.<BR>

Would it be possible to drop one of these engines in an MX-3? The largest engine they have listed is a 2.2L, could they possibly even make a bigger one that we could fit in the MX-3? That would rock.<P>Thx.<P>------------------<BR>Jesse Turner<BR>aka AlphaBitz<BR>MX-3 Dreamer<BR>Kanata, Ontario, Canada

we can put engines in the mx-3. <A HREF="http://www.corksport.com" TARGET=_blank>www.corksport.com</A> sells jspec engines that we can use with some modification.<P><P>------------------<BR>Barry Clark<BR><I><B>Moderator</B></I><BR>1995 Mazda Mx-3 RS<BR>Chaste White<BR><A HREF="http://www.barrykclark.com" TARGET=_blank>barrykclark.com</A> <BR> barrykclark@hotmail.com

Sure we can put engines if we want to,but with a 1.8L 205hp w/o mods?

These engines come with no warranty though.I've seen bad engines come from dealers like these,its a risk.

1 this is corksport we are talking about, not mr Joe Blow Junkyard man. And no u cannot get that much hp without mods. For the 1.8l u need a diff tranny, ecu, axles, mounts, ect. <BR>the 1.6l yyou can if u have a stick, but you have to cut your hood.<P>------------------<BR>Barry Clark<BR><I><B>Moderator</B></I><BR>1995 Mazda Mx-3 RS<BR>Chaste White<BR><A HREF="http://www.barrykclark.com" TARGET=_blank>barrykclark.com</A> <BR> barrykclark@hotmail.com

Why th hell would you want to put a HONDA engine in to a MAZDA????? Ya could do a BP for the same price and have a MAZDA with a MAZDA engine. <BR>Jim<BR>93 Clear White RS

Ok...i know what a b6t is, but what is a bpt? Where can i get one and how much would it cost? Would it fit in my rs?

I never said i wanted to put a honda engine in my mazda,I said those engines in that site give more hp w/o major mods.

jojo, how did you get 205 hp out of a stock 1.8L engine?<P>------------------<BR>-------------------------<BR>1992 Mazda Mx-3 GS<BR>Brilliant Black<BR>1.8L DOHC V-6 5 Speed<BR>-------------------------

i wish i had 205hp in my car.but i said that theres a site i posted that has engines with those type of hp out of a 1.8L

If you want power out of an mx3 . stick with mazda b/c u dont want to change the whole name of the car. and i would probly go with some engines that bolt right in like these:<BR>KL-03:<P>Mazda 626 & MX-6 - 1993-97 <BR>Ford Probe GT - 1993-97 <BR>162 to 167hp @ 5600 to 6000 rpm (*), CR 9.2:1 <BR>(*) Varies from one model to another<P>KL-ZE is to be found ONLY in J-spec cars (ie. Right hand drive, Japan and Australia, maybe imports in UK)<P>Eunos 800 (Mazda 626 & MX-6) - 1998+, Only in Japan <BR>Xedos 9 (Mazda 929 & Millenia) <BR>200 hp @ 6500 rpm, CR 10:1 <P>THE kl ze will probly cost ya like $2000 cnd.<P><BR>jonny

On the engines you mention,are the hp out of stock or after mods.

the kl ze and kl 03 they are stock. <BR>there good engines. tehre like out of 626's and mx6. well have u ever raced an mx6. man they fly. now immagine that engine into a much lighter smaller car. mx3.. it goes man

hey jonny I was wondering where i could pick up a Kl-Ze or kl-03 engine in canada