Page 1 of 1
Rattle Reduction?!
Posted: August 18th, 2003, 5:51 pm
by Pope52
Hey all,<p>I was wonderin if anyone has had a problem with the hatch garnish rattling like a mother...if so, and if you figured out some way to fix or reduce it..how?! Thanks guys.
Re: Rattle Reduction?!
Posted: August 18th, 2003, 11:08 pm
by lakersfan1
Depends on HOW it's ratling. <p>Is the hatch rattling becuase it's not snug against the weather stripping? Then you can adjust the latch so the hatch closes tighter.<p>Is trim ratling agains the hatch? If so, then just stick some foam between the two where they are making contact.<p>Is a trim panel rattling all by itself? Then apply some Dynamat to the backside.
Re: Rattle Reduction?!
Posted: September 15th, 2003, 11:54 pm
by BoomerX54
Remove all of the plastic
Then work from there, testing with each individual piece untill it stops rattling.
I siliconed all of the plugs in the hatch to start with. I havnt had time to start placing plastic back in due to school and work
Re: Rattle Reduction?!
Posted: September 16th, 2003, 1:23 am
by Nd4SpdSe
boom, did you do a BP swap?