Page 1 of 1

Size of speakers in the MX-3

Posted: January 10th, 2003, 7:43 pm
by DVH
K, i know from searching that they say that the size is 6.5 all around....... BUT i measured the speaker that came out of my car (stock one) and it was 5.25.....what is goin on here??? just wondering cuz i wanna get new speakers....but this is messin me up! lol :shrug:

Re: Size of speakers in the MX-3

Posted: January 10th, 2003, 7:51 pm
by marshmallow15
the stock size is 5 1/4" all the way around, but you'll have to drill holes to mount speakers because of how mazda put in a 'three-hole' setup instead of 4 holes like most cars.

Re: Size of speakers in the MX-3

Posted: January 10th, 2003, 11:42 pm
by mzdspd
some aftermarket ones will fit like the kenwoods

Re: Size of speakers in the MX-3

Posted: January 11th, 2003, 1:17 am
by polak_gino
my stock ones are 6 1/2 , is it possible that different years have differnt sizes. cuz this whole debate has been goin on for ever. i put 6 1/2 in all aroud with no prob, with out drilling any holes, so i really dotn know,

Re: Size of speakers in the MX-3

Posted: January 11th, 2003, 2:16 pm
by whinypunk
just post pics of the inside of your door.

Re: Size of speakers in the MX-3

Posted: January 11th, 2003, 4:30 pm
by polak_gino
here is my fornt door with 6 1/2 blaupunkts
Image<p>[ January 11, 2003: Message edited by: polak_gino ]</p>

Re: Size of speakers in the MX-3

Posted: January 11th, 2003, 5:16 pm
by whinypunk
who makes the stock speakers, and how many watts?

Re: Size of speakers in the MX-3

Posted: January 11th, 2003, 7:57 pm
by polak_gino
no idea who they are made by but, i jsut check the back of mine and it is 25w, with my bluapunkts the tweeters are 270w and i cant remeber wat the 6 1/2 is

Re: Size of speakers in the MX-3

Posted: January 12th, 2003, 4:14 am
by VizualXTC
Stock speaker size is in fact 5.25" A 6.5" speaker will fit fine. If you consult the speaker sizing chart in Crutchfield catalog, it will confirm that the stock size is 5.25".

Re: Size of speakers in the MX-3

Posted: January 12th, 2003, 7:05 pm
by mzdspd
when u measure the stock speakers go from circle to circle not from point(where screw goes)to point or from point to circle.

Re: Size of speakers in the MX-3

Posted: January 13th, 2003, 12:13 am
by marius
I have 6.5s but I had to drill new holes for them to fit in the doors

Re: Size of speakers in the MX-3

Posted: January 14th, 2003, 5:37 pm
by your2slow
Same here. Have 6.5 with new holes. They fit perfect and the magnet Does not enterfear with the window at all