Page 1 of 1
PVC cold air intake, looks pretty good...
Posted: March 15th, 2004, 1:07 pm
by RedSallad
I made it over the weekend here is pics,
http://www.cardomain.com/id/mxredsallad
Re: PVC cold air intake, looks pretty good...
Posted: March 15th, 2004, 3:49 pm
by god_of_trash
can you please post the sizes of tubes you used...?
I am going to be doing this same idea this weekend... thanks bro!
Re: PVC cold air intake, looks pretty good...
Posted: March 15th, 2004, 4:48 pm
by RedSallad
The PVC that i used is 3". Heres a list of the things that i bought to make it.
1. 3" Wide 1' long PVC (youll have to cut this piece if you buy by the foot to make it fit)
2. 3" 45 degree bend piece of PVC
3. 2 3" hose connectors.
Depending on what kind of filter you have it will be hard connecting the filter to the PVC, i was lucky enough to have a perfect fit with the original adapter from the filter and the 3" hose connector. (Sorry if that was confusing)
Also they measure the inner diameter of the pvc to 3" the whole pipe from mine was 3.5" with the sides.
Sorry if its confusing but it will all come together when you buy the stuff.
Oh and last the total cost without the filter was around $15, beat that PRM.