Page 1 of 1
BPT Question
Posted: January 16th, 2004, 1:23 pm
by MacMac
what are the hp and tq numbers for a stock bpt? also at what psi. thanks.
Re: BPT Question
Posted: January 16th, 2004, 6:51 pm
by UnkleDuke
Check out the engine section at corksport.com
Re: BPT Question
Posted: January 16th, 2004, 7:36 pm
by jaydog5678
10 lbs. 180hp, about the same in torque.
Re: BPT Question
Posted: January 16th, 2004, 9:45 pm
by OsoSlo z28
my stock boost was 8.5
Re: BPT Question
Posted: January 17th, 2004, 1:59 am
by natural born honda killer
at the 8.5-9.0 psi i dynoed at 162 hp and 165 tq at the wheels.
Re: BPT Question
Posted: January 17th, 2004, 6:19 pm
by MacMac
what kinda of times you guys runnin in the 1/4?
Re: BPT Question
Posted: January 17th, 2004, 8:54 pm
by custommx3gtx
i ran a 14.4 @98 mph on 18" wheels and a ****ty clutch
Re: BPT Question
Posted: January 18th, 2004, 2:07 pm
by natural born honda killer
havent run the 1/4 yet cuz the closest track is an 1/8th mile so i go to that one. but my best was a 9.5 at 74mph but that was when i was running extremely rich like black smoke puffing out the tailpipe and chunks of carbon coming out of the tailpipe. id guess that with the car tuned better now that i have the haltech and up the boost to 15 psi id be in the high 13's but of course just guessing.
Re: BPT Question
Posted: January 23rd, 2004, 1:07 pm
by qik_30x
bpts run 8psi standard. last time i ran at the drag i got a 14.5, and thats at stock boost + a slipping clutch.
When you boost it 14psi it makes a hell of a ot of differance. i beleve with a decent exhaust, and a good launch you can crack 13s.
steve