Guys,
I wrecked my Mx3... I want to get it back up and running.. but i have to get the frame fixed before i can do that. i am looking at things that i need to do after i take care of the frame.
The intake was screwed up. I want to get an entirely new intake... like an weapon-R intake.. The question lies...
There is a wiring harness for the original intake.. and how do i bypass this harness? does the new weapon-r intake have a place for this harness to connect?
I want to get this car running, street legal. looks wont matter until the spring.. because i will get a new paint job to match the entire car.
mike
INTAKE QUESTIONS -- NEED YOUR INPUT
-
- Junior Member
- Posts: 8
- Joined: May 23rd, 2003, 2:01 am
- Location: St. Louis, MO
- Contact:
-
- Regular Member
- Posts: 182
- Joined: October 13th, 2003, 2:01 am
- Location: dalton, ga
- Contact:
Re: INTAKE QUESTIONS -- NEED YOUR INPUT
i know the sensor your talking about i put my air filter on today and forgot to hook it up, car just kept dieing, i dont know whether it can be bypassed or not.
- ryanlindenberg
- Regular Member
- Posts: 874
- Joined: February 24th, 2003, 2:01 am
- Location: Minnesota
Re: INTAKE QUESTIONS -- NEED YOUR INPUT
no you can't bypass the harness as it is connected to the MAF. if you could somehow bypass it your car would run like **** because it would not know how much air it was taking in.
CARDOMAIN WITH UPDATED PICS
"There are 2 kinds of pedestrians, the quick and the dead."
"There are 2 kinds of pedestrians, the quick and the dead."
-
- Regular Member
- Posts: 182
- Joined: October 13th, 2003, 2:01 am
- Location: dalton, ga
- Contact:
Re: INTAKE QUESTIONS -- NEED YOUR INPUT
i didnt think that it could be.
- atlantamx3
- Supporting Member
- Posts: 2888
- Joined: June 2nd, 2001, 2:01 am
- Location: Kennesaw, Ga, USA
- Contact:
Re: INTAKE QUESTIONS -- NEED YOUR INPUT
Even though you cannot bypass it-- there are still ways to have an intake that looks nice AND keeps that damned MAF>
(i.e.- here is mine:)
<img src="http://www.atlantamx3.com/perry/blackvc2.jpg" alt=" - " />
BOMZ Racing Intake for MP3 Protege, or P5 (Any 2.0L is the same..) $30 from Ebay.
(i.e.- here is mine:)
<img src="http://www.atlantamx3.com/perry/blackvc2.jpg" alt=" - " />
BOMZ Racing Intake for MP3 Protege, or P5 (Any 2.0L is the same..) $30 from Ebay.