Page 1 of 1
Need Picture of 90-94 protege LX Tranny Mount
Posted: January 31st, 2003, 3:32 pm
by Methaen
I am looking for a picture of a 1st generation 90-94 Mazda Protege LX 5 spd transmission mount and bellhousing, trying to fit a tranny from a pro in my 1.6 DOHC mx-3
Re: Need Picture of 90-94 protege LX Tranny Mount
Posted: January 31st, 2003, 5:08 pm
by David Witherow
hey they are the same.....i used a tranny mount from the 95 DOHC 4cyl.....mx-3 in my SOHC when i swapped a 98 protege lx in.....but they are the same.......
Re: Need Picture of 90-94 protege LX Tranny Mount
Posted: January 31st, 2003, 5:58 pm
by marshmallow15
<blockquote><font size="1" face="Verdana, Arial">quote:</font><hr>Originally posted by caveman:
hey they are the same.....i used a tranny mount from the 95 DOHC 4cyl.....mx-3 in my SOHC when i swapped a 98 protege lx in.....but they are the same.......<hr></blockquote><p>so the 95 dohc 4cyl mount will work with the g-series tranny? i thought the sohc tranny mount worked fine already?
Re: Need Picture of 90-94 protege LX Tranny Mount
Posted: February 1st, 2003, 4:41 am
by torpedan
The rear tranny mount is ALMOST identical... the bolts run the other direction.. you have to use the protege mounts and flip the bolt that runs threw the mount ot make it work.. i can take some pictures when i get a chance will be a while though.
Re: Need Picture of 90-94 protege LX Tranny Mount
Posted: February 1st, 2003, 9:25 am
by OsoSlo z28
ALL the mounts are the same. the only thing needed is the mounting bracket for the side tranny mount. it's located under the battery tray.
Re: Need Picture of 90-94 protege LX Tranny Mount
Posted: February 2nd, 2003, 12:17 pm
by David Witherow
exactly
Re: Need Picture of 90-94 protege LX Tranny Mount
Posted: February 2nd, 2003, 5:12 pm
by marshmallow15
yea i thought it was just the transmission bracket we needed. tnx for the info.