MX-3.com

Does anyone know any free mods that will not damage my car? [img]shrug.gif"%20border="0[/img]

plug the vacum hose to the FPR<BR>inlarge the bango bolts in the fuel rail

Hey, what is the FPR by the way???<P>Also, how does inlarging the bolts on the fuel rail increase performance, or help in any way???<P>~A

fuel pressure regulator. If you know dnot know where it is check the online shop manual on mx-3.com

It will flow more fuel ~3psi

any other ideas like that

You can reduce your shifter's throw. Some instructions were posted a while back on how to do it.

Throttle Body Coolant Bypass. There is a coolant line that runs thru your TB. If you disconect it from the TB and just splice it together it will keep the extremely hot coolant from heating the intake charge. You won't see huge gains, but it will help add up.

Won't bypassing the cooling line put the TB in the situation of being damaged?

help me to understand why mazda would run hot coolant to the TB? [img]shrug.gif"%20border="0[/img]<P>Hey ryan what did you splice the two wires with? I know dave used a plumbing elbow.<p>[ July 31, 2002: Message edited by: Sonicxtacy02 ]

for winter so it wont freeze

inlarging the bolt on the fuel rail.. does that mean u use more fuel, less mpg?

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by mx3chom:<BR><STRONG>inlarging the bolt on the fuel rail.. does that mean u use more fuel, less mpg?</STRONG><HR></BLOCKQUOTE><P>Just about anything that gives you more power will use more fuel. One possible exception is Chip tuning and I'm not so sure about that.

pluging the vacum to the FPR WILL use more gas<BR>bolts? not sure<BR>it will flow more fuel but that doesn't mean the engine will use it?<P>hmm I dont know [img]shrug.gif"%20border="0[/img]

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Sonicxtacy02:<BR><STRONG>help me to understand why mazda would run hot coolant to the TB? [img]shrug.gif"%20border="0[/img]<P>Hey ryan what did you splice the two wires with? I know dave used a plumbing elbow.<P>[ July 31, 2002: Message edited by: Sonicxtacy02 ]</STRONG><HR></BLOCKQUOTE><P>Durring the winter the coolant will run thru the TB so it won't freeze. If you live in a state where you don't have to worry about freezing temps this is a great mod. I on the other hand live in Utah. We have TERRIBLE winters here, so I have decided not to do this mod myself.