MX-3.com

I just recently bought a 94' Mx-3 1.6 DOHC and I was wondering what a good engine swap would be. I also need aprox prices I am in Mckinney Tx so if you know anywhere around here plz tell me<P>Daniel Jones<BR>94' MX-3<BR>DOHC

there are two main swaps....the b6t and the bpt. look in the post about the bpt swap...it will give you a rundown on the bpt prices. do a search on the b6t and you will find a post from snyper007 with all the b6t prices. hope this helps.

Ok what would be the best swap and what exactly are the swaps

ok....a brief rundown....<BR>the bpt(which is the one i'm doing in about a month) is from a j-spec 90-94 323 gtx. it's a 1.8L 4cyl turbo.<P>the b6t is from a late 80's 323 gtx.(n. american and j-spec) it's a 1.6L 4cyl tubo.<P>the bpt runs around 185hp stock and the b6t runs around 132hp stock<P>which one is the best is up to you. how serious are you about the swap and what gains do you expect? with the bpt, expect to get a different tranny, clutch, flywheel, and driveshafts along with the motor.....

ok yea Im getting the Bpt swap how much would it cost for all the stuff i will replace and everything...Can you also make me a list of what i will need to replace.<P><BR>Daniel Jones<BR>94' MX-3<BR>DOHC

<A HREF="http://www.mx-3.com/cgi-bin/ultimatebb. ... 3&t=000735" TARGET=_blank>bpt swap</A><P>if there's anything else you want to know after reading this...feel free to ask.

Where is Corksport exactly??

portland, or

OK What will they have to do to the body of my car or will it all stay in the engine

i'm not sure if i understand your ques. but i'll try to answer. nothing needs to be done to your car except install the motor. if you get the b6t though, you need to cut a hole in your hood(use a hood scoop) for the intake manifold to fit. if you get a front mount i/c, then you might need to shave some of the inside of the bumper...

Yea you answered my question Do you have aol instant messanger so I can message you if i have ne more questions

b6t..bpt..doesnt kl-ze able to swap on a 1.6 too?

you can swap anything,but the amount of time, money and resources to swap in a v6 into the 4cyl model isn't worth it in my opinion

wow that was pretty fast! well thanks for the info..that question really bugged me, i tried searchin for it through the past posts but couldnt find it.

hey 94 mx-3 im doing this swap in about a week or two. im in farmers branch in texas. i used to live out in mckinney. if you want i can meet up with you and i can give you a rundown of everything. its good to know of someone in the dfw area thats doing a swap. give me a call when ever you want. my cell # is 214 803 4845. cre8v whats your im screen name? just wondering if you wanna talk. its up to you. my screen name is chincmobile69 . just remind me that your from the list otherwise i wont know who you are.<P>i also got all the prices and everything. just hit me up.