Marc's S2- Autozam AZ-3 B5ZE -BOOOOOSSST videooooooo
- marcdh
- Regular Member
- Posts: 1460
- Joined: July 26th, 2006, 3:54 pm
- Location: Belfast -Northern Ireland
- Contact:
Re: Marc's S2- Autozam AZ-3 B5ZE -BOOOOOSSST videooooooo
Haha thanks Surgeon, that's about right.
The old black car was UKDM and severely corroded - as in jack went up, car stayed the same height...
I wanted something more economical but still fun. I was inspired by an ecomodders thread of a boosted honda which achieved brilliant mileage. Jason (jayom) sold me the car for a decent price, whilst it's bodywork was poor it looked great underneath. As for v6 VS i4, economy was the main reason, and the car came with the 1.5. I have 4 years of uni left, with petrol as £1.36 a litre I had to compromise. Road tax is also 40% cheaper too for <1500. I also like the feeling of boost, whilst still getting ZE performance.
The old black car was UKDM and severely corroded - as in jack went up, car stayed the same height...
I wanted something more economical but still fun. I was inspired by an ecomodders thread of a boosted honda which achieved brilliant mileage. Jason (jayom) sold me the car for a decent price, whilst it's bodywork was poor it looked great underneath. As for v6 VS i4, economy was the main reason, and the car came with the 1.5. I have 4 years of uni left, with petrol as £1.36 a litre I had to compromise. Road tax is also 40% cheaper too for <1500. I also like the feeling of boost, whilst still getting ZE performance.
AZ-3 1498cc Turbo! EVO 8 turbo and manifold, 5 stud swap, SSR Type C, DIYPNP seq Megasquirt
Mx-3 2.5 V6 Turbo 291 BHP 251 lbft @ 8psi - Retired due to rust and back at uni
View Worklog
Mx-3 2.5 V6 Turbo 291 BHP 251 lbft @ 8psi - Retired due to rust and back at uni
View Worklog
- mx3_ryder
- Regular Member
- Posts: 371
- Joined: November 2nd, 2012, 8:40 am
- antispam: No
- Location: Troy, VT
Re: Marc's S2- Autozam AZ-3 B5ZE -BOOOOOSSST videooooooo
Awesome video!!!
Was hoping to hear that turbo spool and blow off...
Was hoping to hear that turbo spool and blow off...
- kulluminati777
- Senior Member
- Posts: 2509
- Joined: July 11th, 2010, 11:10 am
- antispam: ~SPAM*SUX~
- Location: Sunny California
- Contact:
Re: Marc's S2- Autozam AZ-3 B5ZE -BOOOOOSSST videooooooo
that video deserves an oscar
- marcdh
- Regular Member
- Posts: 1460
- Joined: July 26th, 2006, 3:54 pm
- Location: Belfast -Northern Ireland
- Contact:
Re: Marc's S2- Autozam AZ-3 B5ZE -BOOOOOSSST videooooooo
Haha thanks guys! Will hopefully get some more vids done. One with a mic by the turbo would be cool.
I acquired a £40 HKS super dragger exhaust off gumtree from a Toyota Glanza. Pity it was dented at the tip and the baffles were on the verge of being blown out. The perforated tube had rotten a bit exposing the packing. The bottom had also been flattened and scraped, these people and their lowness
So naturally I chopped it into pieces.
-Carefully cut the end open
-I rammed in a better condition perforated tube
-hammered out the big dent on the tip
-rotated the tip 180deg so all scrapes are hidden at the top
-sanded and polished it up
-new brackets
-welded to my exhaust
Might have to remove my mid silencer, turbos got things far too quiet! I'm liking the look, this car is so JDM
I acquired a £40 HKS super dragger exhaust off gumtree from a Toyota Glanza. Pity it was dented at the tip and the baffles were on the verge of being blown out. The perforated tube had rotten a bit exposing the packing. The bottom had also been flattened and scraped, these people and their lowness
So naturally I chopped it into pieces.
-Carefully cut the end open
-I rammed in a better condition perforated tube
-hammered out the big dent on the tip
-rotated the tip 180deg so all scrapes are hidden at the top
-sanded and polished it up
-new brackets
-welded to my exhaust
Might have to remove my mid silencer, turbos got things far too quiet! I'm liking the look, this car is so JDM
AZ-3 1498cc Turbo! EVO 8 turbo and manifold, 5 stud swap, SSR Type C, DIYPNP seq Megasquirt
Mx-3 2.5 V6 Turbo 291 BHP 251 lbft @ 8psi - Retired due to rust and back at uni
View Worklog
Mx-3 2.5 V6 Turbo 291 BHP 251 lbft @ 8psi - Retired due to rust and back at uni
View Worklog
- Josh
- Supporting Member
- Posts: 3432
- Joined: April 18th, 2002, 2:01 am
- Location: Washington state
- Contact:
Re: Marc's S2- Autozam AZ-3 B5ZE -BOOOOOSSST videooooooo
Nice work!! I love your attention to detail. Sell done sir!
Josh
95' AWD MX-3 RST - (work log - http://www.mx-3.com/phpBB3/viewtopic.php?f=46&t=73765 )
94' GS - KLZE DD (work log - viewtopic.php?uid=2713&f=46&t=79063&start=0 )
05' MS RX-8 - Parted out and Sold :'(
Feedback - http://www.mx-3.com/phpBB3/viewtopic.php?f=37&t=49519
Cardomain Page - http://www.cardomain.com/ride/408020
Face Book page http://www.facebook.com/pages/Mazda-MX- ... 3472959216
95' AWD MX-3 RST - (work log - http://www.mx-3.com/phpBB3/viewtopic.php?f=46&t=73765 )
94' GS - KLZE DD (work log - viewtopic.php?uid=2713&f=46&t=79063&start=0 )
05' MS RX-8 - Parted out and Sold :'(
Feedback - http://www.mx-3.com/phpBB3/viewtopic.php?f=37&t=49519
Cardomain Page - http://www.cardomain.com/ride/408020
Face Book page http://www.facebook.com/pages/Mazda-MX- ... 3472959216
- marcdh
- Regular Member
- Posts: 1460
- Joined: July 26th, 2006, 3:54 pm
- Location: Belfast -Northern Ireland
- Contact:
Re: Marc's S2- Autozam AZ-3 B5ZE -BOOOOOSSST videooooooo
Thanks Josh! Took ages but I'd been craving an HKS for ages and wanted to keep it as authentic as possible. I remembered you saying a bout straightening your MS tip and thought it must be possible!
AZ-3 1498cc Turbo! EVO 8 turbo and manifold, 5 stud swap, SSR Type C, DIYPNP seq Megasquirt
Mx-3 2.5 V6 Turbo 291 BHP 251 lbft @ 8psi - Retired due to rust and back at uni
View Worklog
Mx-3 2.5 V6 Turbo 291 BHP 251 lbft @ 8psi - Retired due to rust and back at uni
View Worklog
- Josh
- Supporting Member
- Posts: 3432
- Joined: April 18th, 2002, 2:01 am
- Location: Washington state
- Contact:
Re: Marc's S2- Autozam AZ-3 B5ZE -BOOOOOSSST videooooooo
Yeah! I completely forgot I straightened it out, lol. The next step will be much of the same that you have done, so I can enlarge the pipe diameter
I like the look a lot, very clean!
I like the look a lot, very clean!
Josh
95' AWD MX-3 RST - (work log - http://www.mx-3.com/phpBB3/viewtopic.php?f=46&t=73765 )
94' GS - KLZE DD (work log - viewtopic.php?uid=2713&f=46&t=79063&start=0 )
05' MS RX-8 - Parted out and Sold :'(
Feedback - http://www.mx-3.com/phpBB3/viewtopic.php?f=37&t=49519
Cardomain Page - http://www.cardomain.com/ride/408020
Face Book page http://www.facebook.com/pages/Mazda-MX- ... 3472959216
95' AWD MX-3 RST - (work log - http://www.mx-3.com/phpBB3/viewtopic.php?f=46&t=73765 )
94' GS - KLZE DD (work log - viewtopic.php?uid=2713&f=46&t=79063&start=0 )
05' MS RX-8 - Parted out and Sold :'(
Feedback - http://www.mx-3.com/phpBB3/viewtopic.php?f=37&t=49519
Cardomain Page - http://www.cardomain.com/ride/408020
Face Book page http://www.facebook.com/pages/Mazda-MX- ... 3472959216
- [LVPA]93GsSe
- Regular Member
- Posts: 190
- Joined: June 6th, 2013, 7:19 am
- antispam: ~SPAM*SUX~
- Location: Lehigh Valley, PA
Re: Marc's S2- Autozam AZ-3 B5ZE -BOOOOOSSST videooooooo
Nice work on the muffler! I like it.
Knowing you've spent too much on your car,
yet, you still want to keep modding. -priceless
^
|
boosted_bullet
93 Honda Accord LX - Wrecked
95 Honda Del Sol Si - Stolen
92 Honda Accord EX - Parted out
2000 Toyota Celica GTS - Cracked block and broken differential teeth
93 SE - ATX to MTX, work as always in progress
01 Toyota Celica GTS - DD
Worklog to be up soon, still... ...
yet, you still want to keep modding. -priceless
^
|
boosted_bullet
93 Honda Accord LX - Wrecked
95 Honda Del Sol Si - Stolen
92 Honda Accord EX - Parted out
2000 Toyota Celica GTS - Cracked block and broken differential teeth
93 SE - ATX to MTX, work as always in progress
01 Toyota Celica GTS - DD
Worklog to be up soon, still... ...
Re: Marc's S2- Autozam AZ-3 B5ZE -BOOOOOSSST videooooooo
Nice work on the muffler! Keep it coming!
ZOOM-ZOOM
- marcdh
- Regular Member
- Posts: 1460
- Joined: July 26th, 2006, 3:54 pm
- Location: Belfast -Northern Ireland
- Contact:
Re: Marc's S2- Autozam AZ-3 B5ZE -BOOOOOSSST videooooooo
AZ-3 1498cc Turbo! EVO 8 turbo and manifold, 5 stud swap, SSR Type C, DIYPNP seq Megasquirt
Mx-3 2.5 V6 Turbo 291 BHP 251 lbft @ 8psi - Retired due to rust and back at uni
View Worklog
Mx-3 2.5 V6 Turbo 291 BHP 251 lbft @ 8psi - Retired due to rust and back at uni
View Worklog
- Mooneggs
- Forum Moderator
- Posts: 6128
- Joined: August 10th, 2005, 10:08 pm
- antispam: ~SPAM*SUX~
- Location: Hillsboro, OR
- Contact:
Re: Marc's S2- Autozam AZ-3 B5ZE -BOOOOOSSST videooooooo
One of these days I'm going to hire someone like you that can build me a proper MX-3
Amazing.
Amazing.
My Feedback
92 mx-3 gs klze 'race car' IP 15.05 @ 92.5mph
92 mx-3 gs klze 'daily driver' IP 14.55 @ 95.7mph
http://www.cardomain.com/id/Mooneggs
92 mx-3 gs klze 'race car' IP 15.05 @ 92.5mph
92 mx-3 gs klze 'daily driver' IP 14.55 @ 95.7mph
http://www.cardomain.com/id/Mooneggs
- marcdh
- Regular Member
- Posts: 1460
- Joined: July 26th, 2006, 3:54 pm
- Location: Belfast -Northern Ireland
- Contact:
Re: Marc's S2- Autozam AZ-3 B5ZE -BOOOOOSSST videooooooo
lol thanks Mark, you seem to be doing just fine
Some photos in the night:
Some photos in the night:
AZ-3 1498cc Turbo! EVO 8 turbo and manifold, 5 stud swap, SSR Type C, DIYPNP seq Megasquirt
Mx-3 2.5 V6 Turbo 291 BHP 251 lbft @ 8psi - Retired due to rust and back at uni
View Worklog
Mx-3 2.5 V6 Turbo 291 BHP 251 lbft @ 8psi - Retired due to rust and back at uni
View Worklog
- AaronTietje
- Regular Member
- Posts: 1196
- Joined: August 21st, 2009, 5:24 pm
- antispam: No
- Location: Prattsburgh NY
Re: Marc's S2- Autozam AZ-3 B5ZE -BOOOOOSSST videooooooo
Glamour shots. Nicey-nice.
We all want to be fast and look cool. Cool changes but fast never does.
- kulluminati777
- Senior Member
- Posts: 2509
- Joined: July 11th, 2010, 11:10 am
- antispam: ~SPAM*SUX~
- Location: Sunny California
- Contact:
Re: Marc's S2- Autozam AZ-3 B5ZE -BOOOOOSSST videooooooo
those shots do look rather nice.
- mazda915
- Regular Member
- Posts: 223
- Joined: November 10th, 2008, 1:10 pm
- Location: el PASO Texas
- Contact:
Re: Marc's S2- Autozam AZ-3 B5ZE -BOOOOOSSST videooooooo
love the jdm mx3 I wish I can get my hands on one and ship it to the states lol . keep up the good work bro and post more pics love them all .
1992 gs k8ze . 4 inch tip 2.5 cat , cold air intake ,corksport front and rear stut bars home made upper pillar bar , prosport gauges,megan racing 4 pts harnest, 10,000 K HID's , ksport suspension ,