The Worlds First and Largest Mazda MX-3 Forums
https://mx-3.com/phpbb3/
where did you get this information or are you able to read japanese?kulluminati777 wrote:i believe the front bar is 22mm and the rear bar is 25mm thats what the brochure says a believe
where did you get this information or are you able to read japanese?kulluminati777 wrote:
i believe the front bar is 22mm and the rear bar is 25mm thats what the brochure says a believe
if it's that important and you really want to know just take a picture for me and i'll translate it for you.Mooneggs wrote:well what I meant is how can you get the text from the brochure pic into the translator?
And I never noticed the numbers in the brochure either... I just went and pulled mine out of the Mooneggs Warehouse and I see the 25 and 22... so yeah that makes sense. But do you think it would list the front one first? I mean why would whiteline make a 22mm rear bar if the MS one was 25? It seems they would list the front bar first (25) and the rear bar second (22). Also I noticed the part number in my brochure is different front the pic you show. Mine has EA03 34 156 instead of EA03 28 156 in your pic.
japan reads right to left not left to right i thought so the 22 was firstMooneggs wrote:well what I meant is how can you get the text from the brochure pic into the translator?
And I never noticed the numbers in the brochure either... I just went and pulled mine out of the Mooneggs Warehouse and I see the 25 and 22... so yeah that makes sense. But do you think it would list the front one first? I mean why would whiteline make a 22mm rear bar if the MS one was 25? It seems they would list the front bar first (25) and the rear bar second (22). Also I noticed the part number in my brochure is different front the pic you show. Mine has EA03 34 156 instead of EA03 28 156 in your pic.
dun dun dunnnnn the plot thickens
that and isnt it more beneficial to beef up the rear bar on a FWD vehicle...whiteline says that on there website, and they dont make a front bar so it would only be thicker then the OEM front...mazdaspeed beefed up front and rear.... 
would you be able to translate the WHOLE thing pleaseEvo_Spec wrote: if it's that important and you really want to know just take a picture for me and i'll translate it for you.
i always wanted to know what all that wind tunnel stuff said....
The front bar was 25 the rear was 22... The front was used in the V6 to help understeer thus its MASSIVE size. MazdaSpeed was the only company that made an aftermarket front sway for the MX. I know a couple of old MXers with the Rear MS bars as the fronts were not only a pain to change but kind of unnecessary for most.
I was actually thinking about buying a 323 / protege rear and modifying the rodsMooneggs wrote:well as you know (cracks knuckles), impossible is my specialty.
but then again I have a whitline in the GS and a GTR rear bar in the AWD car, so it it necessary... but if you come across a second set in you travels you know who to call 
