Page 5 of 9

Re: Marc's Sooty 2.0 - Autozam AZ-3 B5ZE -New windscreen&5st

Posted: May 12th, 2013, 7:03 pm
by marcdh
In the middle of exams now. Bit of waxing for stress relief.

Image
Image
Image
Image

Re: Marc's Sooty 2.0 - Autozam AZ-3 B5ZE -New windscreen&5st

Posted: May 26th, 2013, 1:04 pm
by marcdh
Soon... Very soon my pretties!
Image

Rx8 425cc denso injectors

Re: Marc's Sooty 2.0 - Autozam AZ-3 B5ZE -New windscreen&5st

Posted: May 26th, 2013, 1:05 pm
by RobMinhas
Any particular reason you went with rx8 injectors vs. the 450cc RX7 ones most people use?

Re: Marc's Sooty 2.0 - Autozam AZ-3 B5ZE -New windscreen&5st

Posted: May 26th, 2013, 1:09 pm
by marcdh
Well availability, price here, high impedance, age and spray pattern. Didn't overly research it but an easy direct swap with no mods for diypnp :)

Re: Marc's Sooty 2.0 - Autozam AZ-3 B5ZE -New windscreen&5st

Posted: May 26th, 2013, 1:15 pm
by RobMinhas
I thought the RX7 ones were the same impedance?

And that's pretty cool, they look slimmer, still fit up fine?

Re: Marc's Sooty 2.0 - Autozam AZ-3 B5ZE -New windscreen&5st

Posted: May 26th, 2013, 2:42 pm
by kulluminati777
The picture with the rainbow is cool!!!

Re: Marc's Sooty 2.0 - Autozam AZ-3 B5ZE -New windscreen&5st

Posted: June 8th, 2013, 8:13 am
by marcdh
Polyurethane filled mounts! The cheap way to firm mounts:
Image
Painted and filled rear:
Image

The front is installed, cba installing rear this morning! I've been working a fair bit so alas turbo progress is slow.

Also removed the AC pump, rad, fan, hoses etc. much cleaner engine bay!

Finally got the right adaptor for oil feed off the head:
1/8 BSPT (tapered not straight!) to AN4 (7/16 JIC UNF)

Re: Marc's Sooty 2.0 - Autozam AZ-3 B5ZE -New windscreen&5st

Posted: June 9th, 2013, 1:48 pm
by Josh
Not cheep, that is the right way to fill mounts! Looks great.

Re: Marc's Sooty 2.0 - Autozam AZ-3 B5ZE -New windscreen&5st

Posted: June 21st, 2013, 4:35 pm
by marcdh
Cleaned up:
Image

Rare sunny shot:
Image

Re: Marc's Sooty 2.0 - Autozam AZ-3 B5ZE -New windscreen&5st

Posted: June 22nd, 2013, 2:53 pm
by marcdh
So I appear to have a B3S7 flywheel (same as 1.3 festiva?)
Image

Today's work in a few photos!
Image

Image
Image
Image
Image

My view for a fair bit of today:
Image

Hours of work for this lol:

Image

Not helped by A LOT of this:
Image

So that's the horrible oil return job done. Alignment to the turbo drain is brilliant. Next step intercooler piping!

Oh yea and on Friday I also sorted out this disgusting sight:
Image

And made this fit the B5 setup:
Image

Re: Marc's Sooty 2.0 - Autozam AZ-3 B5ZE BOOOOOOOOST WOOOO

Posted: June 26th, 2013, 6:38 pm
by marcdh
Image
Not bad for a 1.5 :lol: for whatever reason its only hitting 6psi but that's feeling pretty fun right now :-D

More on this tomorrow!

https://www.youtube.com/watch?v=YWjTBZX ... ata_player

Re: Marc's Sooty 2.0 - Autozam AZ-3 B5ZE -BOOOOOSSST

Posted: June 27th, 2013, 4:17 am
by youdirtyfox
:D Nice result indeed, look forward to seeing more on this!

Re: Marc's Sooty 2.0 - Autozam AZ-3 B5ZE -BOOOOOSSST

Posted: June 27th, 2013, 8:49 am
by marcdh
Cheers Sam! There are some strange smells going on, hopefully not my clutch :lol: The manifold has turned a pretty golden colour now.

Re: Marc's Sooty 2.0 - Autozam AZ-3 B5ZE -BOOOOOSSST

Posted: June 27th, 2013, 9:19 am
by youdirtyfox
Lets fookin hope not man! Mmmm do love hot stainless colours :D

Re: Marc's Sooty 2.0 - Autozam AZ-3 B5ZE -BOOOOOSSST

Posted: June 27th, 2013, 12:15 pm
by Josh
Nice work!! That is about spot on for HP. Your mani should start turning a shade of purple if you go on some long drives. At night if you pop the hood after a drive you should be able to see it glowing red. Look forward to seeing more!