HVAC INDIGLO GUAGES (poll) Speedhut
-
- Regular Member
- Posts: 389
- Joined: March 16th, 2003, 2:01 am
- Location: Newark, DE, USA
- Contact:
Re: HVAC INDIGLO GUAGES (poll) Speedhut
I know it's an optical illusion, but the slanted stripes of the rectangle between the fresh and recirc icons make it look like it's crooked. I'd say stay with a solid bar or just put in vertical stripes.
Re: HVAC INDIGLO GUAGES (poll) Speedhut
Interested - push button<p>Side note: Switching from 93 slider to 94 push button I found out that the 94+ control panel is an inch shorter in width - so there may have to be 3 types. Nice job on the design so far, keep them coming.
-
- Regular Member
- Posts: 389
- Joined: March 16th, 2003, 2:01 am
- Location: Newark, DE, USA
- Contact:
Re: HVAC INDIGLO GUAGES (poll) Speedhut
<blockquote><font size="1" face="Verdana, Arial">quote:</font><hr>Originally posted by Maddbuck:
Interested - push button<p>Side note: Switching from 93 slider to 94 push button I found out that the 94+ control panel is an inch shorter in width - so there may have to be 3 types. Nice job on the design so far, keep them coming.<hr></blockquote><p>94-up have buttons, 92 and 93 have sliders. There are only two types of controls.
Interested - push button<p>Side note: Switching from 93 slider to 94 push button I found out that the 94+ control panel is an inch shorter in width - so there may have to be 3 types. Nice job on the design so far, keep them coming.<hr></blockquote><p>94-up have buttons, 92 and 93 have sliders. There are only two types of controls.
-
- Forum Moderator
- Posts: 3415
- Joined: September 3rd, 2002, 2:01 am
- Location: Eastern Hemisphere
- Contact:
Re: HVAC INDIGLO GUAGES (poll) Speedhut
not true 93-94 had sliders and 94-95 had push buttons, sometime durring 94 they changed
08 Infiniti G37s 6speed (The Daily)
Stillen Cold Air Intake, Z1 Plenum Power Mod, Z1 Headers, Z1 Test Pipe, OBX (Ark) Exhaust, Up-Rev Osiris Engine Management (Tuned at Z1), 20x9" 20x10" Str Racing Concave Staggered Rims, SPC Camber kit, Tein H Techs Springs
01 Lexus Is300 (LS2 Project)
93 Mx3 SE 2.5 KLZE (sold it)
93 Mx3 GS 2.0 KFZE (killed it)
Stillen Cold Air Intake, Z1 Plenum Power Mod, Z1 Headers, Z1 Test Pipe, OBX (Ark) Exhaust, Up-Rev Osiris Engine Management (Tuned at Z1), 20x9" 20x10" Str Racing Concave Staggered Rims, SPC Camber kit, Tein H Techs Springs
01 Lexus Is300 (LS2 Project)
93 Mx3 SE 2.5 KLZE (sold it)
93 Mx3 GS 2.0 KFZE (killed it)
-
- Regular Member
- Posts: 576
- Joined: March 24th, 2002, 2:01 am
- Location: Stellarton, Nova scotia, Canada
- Contact:
Re: HVAC INDIGLO GUAGES (poll) Speedhut
mine is a '95 and it has sliders. I am interested also.
- Night MX-3
- Regular Member
- Posts: 32
- Joined: August 16th, 2003, 2:01 am
- Location: Fort Smith, AR
Re: HVAC INDIGLO GUAGES (poll) Speedhut
I have a 95 and it has push buttons...can you make it sliders? im interested and i would like sliders
-
- Senior Member
- Posts: 2030
- Joined: February 3rd, 2002, 2:01 am
- Location: Toronto, Ontario, Canada
- Contact:
Re: HVAC INDIGLO GUAGES (poll) Speedhut
let me clear this, i know that in canada they were all slider type except for the 94+ GS model and in the US, i think it was packaged with some other options, that means if you dont have certain options, it came slider.
but i am 150% sure about canada.
![Shrug :shrug:](./images/smilies/shrug.gif)
but i am 150% sure about canada.
![Image](http://www.sikbluemx3.com/sigs_4.jpg)
- papa roached
- Senior Member
- Posts: 2761
- Joined: December 10th, 2002, 2:01 am
- Location: Montgomery, WVa
Re: HVAC INDIGLO GUAGES (poll) Speedhut
im in, i would like to see a normal style instrad of reverse glow, but i wont complain to much either way, im in for sliders
93 MX-3 GS (collecting parts for Eunos Presso conversion), 94 626 Transmission (4.10 gears), KL31 camed KL-ZE, Millenia intake, Millenia TB, SSAutochrome V2 headers, Magnaflow cat, 2 1/4 in pipe, Top Speed Pro 1 muffler, 9lb Fidanza Flywheel, ACT clutch, Corksport SS clutch line, Corksport SS brake lines, Unorthadox UDP, 255 lph fuel pump, HEI mod, ghetto-charger intake, KL36 ECU, SRD transverse crossmember bushings, SRD shifter extention bushing, SRD crossmember, Corksport bronzoil shifter bushings, Brembo Crossdrilled and Slotted rotors, 15 inch Konig Heliums, ZX-2 S/R struts, Eibach lowering springs, OEM front strut bar, Ebay rear strut bar, BFGoodrich G-Force T/A KDWs
Parts needing installed: turbo kit from BB (if i ever get it), 9.0:1 CR Diamond pistons, 4340 forged H beam rods, C/J-Spec spoiler, Nissan red tops in KL rails
http://www.cardomain.com/id/blazejeremy
Parts needing installed: turbo kit from BB (if i ever get it), 9.0:1 CR Diamond pistons, 4340 forged H beam rods, C/J-Spec spoiler, Nissan red tops in KL rails
http://www.cardomain.com/id/blazejeremy
-
- Forum Moderator
- Posts: 3415
- Joined: September 3rd, 2002, 2:01 am
- Location: Eastern Hemisphere
- Contact:
Re: HVAC INDIGLO GUAGES (poll) Speedhut
Ok guys this is good i have 30 unofficial ""I'm In"" the Vote is Sliders, I will be posting
the official groupbuy post in the groupbuy section by wednesday, it will also have the final look and all information on payment shipping, and everything that will be needed. Remeber we have to have 30 i am sure if we come close to 25 we can still have them, but i agreed to 30 and thats what im gonna give them. So what im saying is everyone is counting on everyone on this. Now for slackers who dont get in on the group buy, I will be ordering 5 extra kits BUT you really are not going to want to purchase these because they will be going on ebay for a reserve of 75 dollers EACH, what does this say GET ON THE GROUP BUY.<p>Also 3 dollers from each unit being purchased is going to be donated to Mx-3.com. <p>So the total is 38 (US) dollers + shipping, shipping should be really cheap because these items are not that big and dont weigh that much.<p>OVERSEA ORDERS: You guys will have to talk to me individually, either by email, aim, or hell i have free long distance if its importent enough ill call you.<p>
If you guys have any further questions or comments feel free to post or email me
Remeber guys this doesnt happen unless we make it happen, if we are shy by 2 or 3 units i will make up for the cost and just give them away at later mx3 meets or something.<p>
Brian<p>Jnumonik@stillvapor.com
Jnumonik (aim)
the official groupbuy post in the groupbuy section by wednesday, it will also have the final look and all information on payment shipping, and everything that will be needed. Remeber we have to have 30 i am sure if we come close to 25 we can still have them, but i agreed to 30 and thats what im gonna give them. So what im saying is everyone is counting on everyone on this. Now for slackers who dont get in on the group buy, I will be ordering 5 extra kits BUT you really are not going to want to purchase these because they will be going on ebay for a reserve of 75 dollers EACH, what does this say GET ON THE GROUP BUY.<p>Also 3 dollers from each unit being purchased is going to be donated to Mx-3.com. <p>So the total is 38 (US) dollers + shipping, shipping should be really cheap because these items are not that big and dont weigh that much.<p>OVERSEA ORDERS: You guys will have to talk to me individually, either by email, aim, or hell i have free long distance if its importent enough ill call you.<p>
If you guys have any further questions or comments feel free to post or email me
Remeber guys this doesnt happen unless we make it happen, if we are shy by 2 or 3 units i will make up for the cost and just give them away at later mx3 meets or something.<p>
Brian<p>Jnumonik@stillvapor.com
Jnumonik (aim)
08 Infiniti G37s 6speed (The Daily)
Stillen Cold Air Intake, Z1 Plenum Power Mod, Z1 Headers, Z1 Test Pipe, OBX (Ark) Exhaust, Up-Rev Osiris Engine Management (Tuned at Z1), 20x9" 20x10" Str Racing Concave Staggered Rims, SPC Camber kit, Tein H Techs Springs
01 Lexus Is300 (LS2 Project)
93 Mx3 SE 2.5 KLZE (sold it)
93 Mx3 GS 2.0 KFZE (killed it)
Stillen Cold Air Intake, Z1 Plenum Power Mod, Z1 Headers, Z1 Test Pipe, OBX (Ark) Exhaust, Up-Rev Osiris Engine Management (Tuned at Z1), 20x9" 20x10" Str Racing Concave Staggered Rims, SPC Camber kit, Tein H Techs Springs
01 Lexus Is300 (LS2 Project)
93 Mx3 SE 2.5 KLZE (sold it)
93 Mx3 GS 2.0 KFZE (killed it)
- Nd4SpdSe
- Senior Member
- Posts: 11212
- Joined: May 25th, 2002, 2:01 am
- Location: Québec City, Quebec, Canada
- Contact:
Re: HVAC INDIGLO GUAGES (poll) Speedhut
How long do you expect it to take for them to complete?<p>Also, do we get a choise between normal or reverse? 'Cause i would like normal
1992 Mazda Mx-3 GSR - 2.5L KLZE : Award Winning Show Car & Race Car ['02-'09] (Retired)
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
- ryanlindenberg
- Regular Member
- Posts: 874
- Joined: February 24th, 2003, 2:01 am
- Location: Minnesota
Re: HVAC INDIGLO GUAGES (poll) Speedhut
i think our HVAC panels are the same ones as other cars have. i think my moms 626 (1993 i believe) HVAC panel is the same as mine(push-button style). i don't know for sure as i dont live with my parents so i can't check. but it might be worth looking into if support is lacking.
<p>except my mom's HVAC has a "SWING" button on it so maybe it is a little different.
![Shrug :shrug:](./images/smilies/shrug.gif)
CARDOMAIN WITH UPDATED PICS
"There are 2 kinds of pedestrians, the quick and the dead."
"There are 2 kinds of pedestrians, the quick and the dead."
- Nd4SpdSe
- Senior Member
- Posts: 11212
- Joined: May 25th, 2002, 2:01 am
- Location: Québec City, Quebec, Canada
- Contact:
Re: HVAC INDIGLO GUAGES (poll) Speedhut
our slider is identical to the early MPV modem (i saw one today when i was getting ym oil changed)
1992 Mazda Mx-3 GSR - 2.5L KLZE : Award Winning Show Car & Race Car ['02-'09] (Retired)
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
-
- Forum Moderator
- Posts: 3415
- Joined: September 3rd, 2002, 2:01 am
- Location: Eastern Hemisphere
- Contact:
Re: HVAC INDIGLO GUAGES (poll) Speedhut
soon as i get a reply back from speedhut ill start the buy
08 Infiniti G37s 6speed (The Daily)
Stillen Cold Air Intake, Z1 Plenum Power Mod, Z1 Headers, Z1 Test Pipe, OBX (Ark) Exhaust, Up-Rev Osiris Engine Management (Tuned at Z1), 20x9" 20x10" Str Racing Concave Staggered Rims, SPC Camber kit, Tein H Techs Springs
01 Lexus Is300 (LS2 Project)
93 Mx3 SE 2.5 KLZE (sold it)
93 Mx3 GS 2.0 KFZE (killed it)
Stillen Cold Air Intake, Z1 Plenum Power Mod, Z1 Headers, Z1 Test Pipe, OBX (Ark) Exhaust, Up-Rev Osiris Engine Management (Tuned at Z1), 20x9" 20x10" Str Racing Concave Staggered Rims, SPC Camber kit, Tein H Techs Springs
01 Lexus Is300 (LS2 Project)
93 Mx3 SE 2.5 KLZE (sold it)
93 Mx3 GS 2.0 KFZE (killed it)
- papa roached
- Senior Member
- Posts: 2761
- Joined: December 10th, 2002, 2:01 am
- Location: Montgomery, WVa
Re: HVAC INDIGLO GUAGES (poll) Speedhut
im so interested but i wont have the cash right away......anyway i can get ya to nab one and hold it for me?
93 MX-3 GS (collecting parts for Eunos Presso conversion), 94 626 Transmission (4.10 gears), KL31 camed KL-ZE, Millenia intake, Millenia TB, SSAutochrome V2 headers, Magnaflow cat, 2 1/4 in pipe, Top Speed Pro 1 muffler, 9lb Fidanza Flywheel, ACT clutch, Corksport SS clutch line, Corksport SS brake lines, Unorthadox UDP, 255 lph fuel pump, HEI mod, ghetto-charger intake, KL36 ECU, SRD transverse crossmember bushings, SRD shifter extention bushing, SRD crossmember, Corksport bronzoil shifter bushings, Brembo Crossdrilled and Slotted rotors, 15 inch Konig Heliums, ZX-2 S/R struts, Eibach lowering springs, OEM front strut bar, Ebay rear strut bar, BFGoodrich G-Force T/A KDWs
Parts needing installed: turbo kit from BB (if i ever get it), 9.0:1 CR Diamond pistons, 4340 forged H beam rods, C/J-Spec spoiler, Nissan red tops in KL rails
http://www.cardomain.com/id/blazejeremy
Parts needing installed: turbo kit from BB (if i ever get it), 9.0:1 CR Diamond pistons, 4340 forged H beam rods, C/J-Spec spoiler, Nissan red tops in KL rails
http://www.cardomain.com/id/blazejeremy
-
- Regular Member
- Posts: 472
- Joined: December 20th, 2001, 2:01 am
- Location: Rochester, NY
Re: HVAC INDIGLO GUAGES (poll) Speedhut
HVAC = Heating Ventalation Air conditioning