Page 23 of 25
Re: fowljesse's GS/SE DE/ZE ;)
Posted: February 18th, 2012, 2:12 pm
by fowljesse
MrMazda92 wrote:fowljesse wrote:I did some auto-autocrossing by the airport


I wish I could've seen it!
The best part was, when I was leaving, a cop came out of somewhere, and followed me a bit, but I was going the speed limit by then

Too late, occifer
Thanks, kulluminati777! I still wonder what people think when they go through it. it's weird, but, when you ride in it, it all make sense

MOoneggs was just saying that I should put the batmobile rear skirts back on. I think I will, and make a better underbody diffuser. I'm going to make one for the rear, too.
Re: fowljesse's GS/SE DE/ZE ;)
Posted: February 18th, 2012, 5:06 pm
by MrMazda92
You're lucky with police then Jesse... I was ticketed once because the officer "heard me exceeding the speed limit".
By the sound of my exhaust, he was able to(with the same accuracy as a radar gun apparently) gauge my speed at 40 mph, in a school zone. He pulled me over more than 6 miles away, citing me for careless driving. That was my first ticket ever, and he didn't even see my car... If he had, he would have seen the 2 blown struts on the rear, and how slowly I had to go through that school parking lot. 3 axle breaker speed bumps at every turn in the lot, with blown struts...
Best part, it was a private HIGH SCHOOL, so there was no school zone to begin with.
I hate Eugene Police... Springfield and State are way more professional.
/Rant
I'm glad to see you're coming up with some more good ideas! I've missed them!
By the way, I am hoping to be race ready, spring of 2014... Want to help me get there?

Re: fowljesse's GS/SE DE/ZE ;)
Posted: February 22nd, 2012, 6:11 pm
by fowljesse
That sucks!
Yeah, I'll do what I can to help out
SO, I had this idea. I don't remember if I posted about it a long time ago, or not, but here it is; I wanted to make a ram air intake out of the headlight hole, and have a projector light in the middle. I didn't want to destroy a headlight to experiment with, but a guy did it for me! Now I have the part intact (just the light housing, about 3" diameter) and a good hole there. I am going to enclose the part somehow, and position it in the middle of the ram air intake. If it doesn't work

no loss. But, I feel pretty good about it. It will be a direct shot to the air filter, fully enclosed.
Re: fowljesse's GS/SE DE/ZE ;)
Posted: February 23rd, 2012, 2:28 am
by MrMazda92
I appreciate it a lot
I like it, but that probably isn't street legal... I've never seen a car with only one headlight, well, aside from a burnt out bulb.

Still, I'd love the idea of the intake. I bought a Euro bumper for exactly that purpose, although I don't think I'll enclose it at this point... Not until I have a rainy day car.
Re: fowljesse's GS/SE DE/ZE ;)
Posted: February 23rd, 2012, 12:01 pm
by IMACHU2
[quote="MrMazda92"]You're lucky with police then Jesse... I was ticketed once because the officer "heard me exceeding the speed limit".
You should have taken that to court, it would have got thrown out.
Re: fowljesse's GS/SE DE/ZE ;)
Posted: February 23rd, 2012, 9:44 pm
by MrMazda92
IMACHU2 wrote:You should have taken that to court, it would have got thrown out.
I did... after I rebutted that statement he tacked on "until I came outside and saw him speeding away."
The judge gave it maybe 30 seconds of consideration. The fact that I was pulled over 6+ miles away from the alleged incident was completely disregarded... If he'd seen me speeding, he would have pulled me over immediately.
I've been pulled over when I actually did something stupid, and paid my dues without contesting the ticket... I just don't get how the Judge is supposed to be impartial, when they know the officer on a first name basis, and have their paychecks cut from the same place. It doesn't make sense, not at all...
Sorry for the hijack Jesse, let me know if you want me to delete this post. I forgot I was replying in a worklog...

Re: fowljesse's GS/SE DE/ZE ;)
Posted: February 23rd, 2012, 10:52 pm
by fowljesse
Eh, it's okay. About the headlight; I am going to have both projectors going. The passenger side intact, and the driver's all by it's lonesome, encapsulated inside the intake.
Re: fowljesse's GS/SE DE/ZE ;)
Posted: February 25th, 2012, 3:43 pm
by IMACHU2
Ya depends on the Judge, I blew by a speed trap at like 180KMPH when I was young and dumb, he caught up with me a few minutes later. When I took it to court, I asked how many minutes he lost sight of my car, then I asked if he was even sure it was the same car, I had looked up how many of my car were made (91 Mark VII Lincoln) and asked if mine looked so different from the other 587000 that were made between 84-92. Cop said "I am pretty sure it was you". Gavel came down, case dismissed

Re: fowljesse's GS/SE DE/ZE ;)
Posted: February 26th, 2012, 3:41 pm
by fowljesse
^ Nice.
So I killed my car again. MegaSquirt isn't powering up so I wrote to DIYAutotune. I'll send it to them (Hopefully Matt), and see if it can be fixed. If not, I have to buy another one

Re: fowljesse's GS/SE DE/ZE ;)
Posted: February 26th, 2012, 9:04 pm
by MrMazda92
Damn

I was hoping that you guys would figure it out yesterday

Re: fowljesse's GS/SE DE/ZE ;)
Posted: February 27th, 2012, 12:10 am
by fowljesse
Me too!
At worst, a new daughter board is about $250.
It was just the topping of a week of poopcake

Re: fowljesse's GS/SE DE/ZE ;)
Posted: February 27th, 2012, 2:46 am
by WhiteFinish
How come the motherboard is fried ? That isn't that commen i think...

Re: fowljesse's GS/SE DE/ZE ;)
Posted: February 27th, 2012, 9:47 pm
by fowljesse
I don't know exactly what the problem is. I'm going to send it in for diagnosis. There was a wire that had come loose that I soldered back in place, but it still doesn't seem to be getting power. The wire could have shorted something.

Re: fowljesse's GS/ZE/DE/SE ; )
Posted: March 20th, 2012, 10:56 pm
by mx3matt
fowljesse wrote:Got some junk done!
I finished the "Ferrari" tails. They look pretty cool (better than the pic), and work great.
did you only take off the outer lense? mine have major condensation and i really like this look.
i have an extra set so i wouldnt mine sacrificing them.
Re: fowljesse's GS/SE DE/ZE ;)
Posted: March 26th, 2012, 7:51 pm
by fowljesse
I filled in the ribbed part, and then stuck on a piece of plastic that I cut to size, and cut the holes out for the lights. Then I smoothed it all out with finishing bondo.
The car is running again!
I did fry the chip, and Peter Florance of PFtuning fixed it, and sent an extra chip for when I do it again
I have a friend who is a car guy with a 400ish hp WRX that is a professional computer guy who is familiar with MegaSquirt. He is going to help me fine tune on Thursday. Wooohoooo!