//***v6 turbo kit in production...yes!!! for the mx-3***\\

A Forum For All Forced Induction Systems Topics Such As Turbos, Superchargers and Nitrous Oxide.
User avatar
EZ_4_FUN
Supporting Member
Posts: 1026
Joined: April 2nd, 2001, 2:01 am
Location: Toronto
Contact:

Update

Post by EZ_4_FUN »

Received the exhaust housings and wastegates this week.

Apparently August 3, I will be receiveing the piping, intercoolers and silicone couplers.

August 3 guys, lets keep our fingers crossed!
OSKY
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.

http://www.pakfeifertuning.com
User avatar
Dali
Supporting Member
Posts: 1621
Joined: January 28th, 2003, 2:01 am
antispam: No
Location: Williams lake, BC

Post by Dali »

just curious with the first half turbos sent, were the fins bent at all on the exhaust side, the shaft ok, do they need to be reballanced. anyways looking good, thanks for the update.
User avatar
EZ_4_FUN
Supporting Member
Posts: 1026
Joined: April 2nd, 2001, 2:01 am
Location: Toronto
Contact:

Post by EZ_4_FUN »

Blades and shafts appear to be in perfect condition.

They were shipped in thier original packaging, so i dont think any damage was sustained.
OSKY
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.

http://www.pakfeifertuning.com
User avatar
papa roached
Senior Member
Posts: 2761
Joined: December 10th, 2002, 2:01 am
Location: Montgomery, WVa

Post by papa roached »

any word on the slimline fans?
93 MX-3 GS (collecting parts for Eunos Presso conversion), 94 626 Transmission (4.10 gears), KL31 camed KL-ZE, Millenia intake, Millenia TB, SSAutochrome V2 headers, Magnaflow cat, 2 1/4 in pipe, Top Speed Pro 1 muffler, 9lb Fidanza Flywheel, ACT clutch, Corksport SS clutch line, Corksport SS brake lines, Unorthadox UDP, 255 lph fuel pump, HEI mod, ghetto-charger intake, KL36 ECU, SRD transverse crossmember bushings, SRD shifter extention bushing, SRD crossmember, Corksport bronzoil shifter bushings, Brembo Crossdrilled and Slotted rotors, 15 inch Konig Heliums, ZX-2 S/R struts, Eibach lowering springs, OEM front strut bar, Ebay rear strut bar, BFGoodrich G-Force T/A KDWs

Parts needing installed: turbo kit from BB (if i ever get it), 9.0:1 CR Diamond pistons, 4340 forged H beam rods, C/J-Spec spoiler, Nissan red tops in KL rails
http://www.cardomain.com/id/blazejeremy
MazdaManiacMx3
Supporting Member
Posts: 1637
Joined: February 18th, 2003, 2:01 am
Location: Jermyn,PA

Post by MazdaManiacMx3 »

Today is the day we :D Or will it be the day we :cry:
93 Kandy Tangerine Mx3 GS-DE
05 Saab 9-2x (Wrx power plant)
02 Subaru Impreza OBS
05 Subaru forester Xt - sti mods
04 dodge ram - toy hauler -FOR SALE
& Lots of Toys to haul :D
User avatar
EZ_4_FUN
Supporting Member
Posts: 1026
Joined: April 2nd, 2001, 2:01 am
Location: Toronto
Contact:

Post by EZ_4_FUN »

If you still have not sent in complete payment, I'd say right about now would be great! 8)

Its been a long time coming. Some thought the day would never realize, others chanted marshmallow... We are almost done.

http://tkfiles.storage.msn.com/x1p3XelC ... kcpXQvlfPZ
OSKY
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.

http://www.pakfeifertuning.com
User avatar
Dali
Supporting Member
Posts: 1621
Joined: January 28th, 2003, 2:01 am
antispam: No
Location: Williams lake, BC

Post by Dali »

did everything show....yippie, one more headache gone. pm me the amount i still owe, im just at work so i cant check on my computer and i am not going to be at that one this weekend. thanks man. or email me at unclesluggo@shaw.ca
User avatar
mx3stylez
Regular Member
Posts: 114
Joined: October 31st, 2005, 4:56 pm
Location: edmonton, alberta

Post by mx3stylez »

i must be dreaming, this day has been a long time comin'
klze swap, wisco 8.5 comp pistons, pauter rods, act stage 3 clutch, lightened flywheel, UR racing pulley, flex-o-lite oil cooler, 2.5" custom exhaust with high flow cat, B&M short throw shifter, S&R cross drilled rotors, , B&G lowering springs, maxxim 17" gun metal rims, modded nissan injectors, walbro 255 lph fuel pump, areomotive afpr, msd 6a , magasquirt v3, and turboed
MazdaManiacMx3
Supporting Member
Posts: 1637
Joined: February 18th, 2003, 2:01 am
Location: Jermyn,PA

Post by MazdaManiacMx3 »

So all the parts have come in ? :D
93 Kandy Tangerine Mx3 GS-DE
05 Saab 9-2x (Wrx power plant)
02 Subaru Impreza OBS
05 Subaru forester Xt - sti mods
04 dodge ram - toy hauler -FOR SALE
& Lots of Toys to haul :D
User avatar
EZ_4_FUN
Supporting Member
Posts: 1026
Joined: April 2nd, 2001, 2:01 am
Location: Toronto
Contact:

Post by EZ_4_FUN »

More of the same... nothing yet.
OSKY
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.

http://www.pakfeifertuning.com
User avatar
slimmyslim1420
Regular Member
Posts: 381
Joined: October 22nd, 2005, 12:22 pm
Location: Tennessee

Post by slimmyslim1420 »

So when will you be shipping out the individual kits? Or are you still waiting on more parts?
1992 GS ZE swap 94 dash swap drilled and slotted rotors full ceramic pads CS SS clutch and brake lines KL-36 ecu zx-2 tokico struts eibach springs short shifter Tenzo exhaust Hi flow cat 2.5 in piping
MazdaManiacMx3
Supporting Member
Posts: 1637
Joined: February 18th, 2003, 2:01 am
Location: Jermyn,PA

Post by MazdaManiacMx3 »

Yes can you give us a list of what came and what we are waiting for ? Im not understanding exactly what the wait is ? Is everything there besides the Slim fans ? Did all the pipes come ?
Thanks
Kris
93 Kandy Tangerine Mx3 GS-DE
05 Saab 9-2x (Wrx power plant)
02 Subaru Impreza OBS
05 Subaru forester Xt - sti mods
04 dodge ram - toy hauler -FOR SALE
& Lots of Toys to haul :D
User avatar
papa roached
Senior Member
Posts: 2761
Joined: December 10th, 2002, 2:01 am
Location: Montgomery, WVa

Post by papa roached »

MazdaManiacMx3 wrote:Yes can you give us a list of what came and what we are waiting for ? Im not understanding exactly what the wait is ? Is everything there besides the Slim fans ? Did all the pipes come ?
Thanks
Kris
ditto and ditto to the post above it
93 MX-3 GS (collecting parts for Eunos Presso conversion), 94 626 Transmission (4.10 gears), KL31 camed KL-ZE, Millenia intake, Millenia TB, SSAutochrome V2 headers, Magnaflow cat, 2 1/4 in pipe, Top Speed Pro 1 muffler, 9lb Fidanza Flywheel, ACT clutch, Corksport SS clutch line, Corksport SS brake lines, Unorthadox UDP, 255 lph fuel pump, HEI mod, ghetto-charger intake, KL36 ECU, SRD transverse crossmember bushings, SRD shifter extention bushing, SRD crossmember, Corksport bronzoil shifter bushings, Brembo Crossdrilled and Slotted rotors, 15 inch Konig Heliums, ZX-2 S/R struts, Eibach lowering springs, OEM front strut bar, Ebay rear strut bar, BFGoodrich G-Force T/A KDWs

Parts needing installed: turbo kit from BB (if i ever get it), 9.0:1 CR Diamond pistons, 4340 forged H beam rods, C/J-Spec spoiler, Nissan red tops in KL rails
http://www.cardomain.com/id/blazejeremy
User avatar
EZ_4_FUN
Supporting Member
Posts: 1026
Joined: April 2nd, 2001, 2:01 am
Location: Toronto
Contact:

Post by EZ_4_FUN »

When I said more of the same, I meant that August 3rd came and went without any deliveries; thus, more of the same.

Update:

Yesterday afternoon i received a fax from Abe showing indeed the arrival of the piping.

In my possesion, I have:

-3 turbos
-3 BOV's
-3 wastegates

I will be coordinating with Abe today which orders will be shipped. This will be based on who has completely paid for their kit followed by the order in which they came in.

I've been informed that with the pipes will come the intercooler and silicon fittings.

The remaining turbo's, BOV's and wastegates I presume still need to be purchased. I have heard no updates on the fans other than that they have sourced out a supplier.

I will be contacting those of you whom have yet to fully pay for the order later this afternoon.
OSKY
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.

http://www.pakfeifertuning.com
MazdaManiacMx3
Supporting Member
Posts: 1637
Joined: February 18th, 2003, 2:01 am
Location: Jermyn,PA

Post by MazdaManiacMx3 »

Thanks for clearing that up ...
93 Kandy Tangerine Mx3 GS-DE
05 Saab 9-2x (Wrx power plant)
02 Subaru Impreza OBS
05 Subaru forester Xt - sti mods
04 dodge ram - toy hauler -FOR SALE
& Lots of Toys to haul :D
Post Reply

Return to “Forced Induction”