Page 3 of 51
Re: UK Sam's 1.6 Turbo MX-3 project
Posted: November 25th, 2010, 1:30 am
by youdirtyfox
you serious man!? I could do my whole turbo conversion for the price of them
![Laughing :lol:](./images/smilies/icon_lol.gif)
Re: UK Sam's 1.6 Turbo MX-3 project
Posted: November 25th, 2010, 1:50 am
by RS_OBD'oh_2
youdirtyfox wrote:you serious man!? I could do my whole turbo conversion for the price of them
![Laughing :lol:](./images/smilies/icon_lol.gif)
the whole turbo conversion eh? On an OBDII? maybe, but it would be done with junk yard parts/ knock-offs and it would not have a decent tune. Or last for that matter. You cannot boost your car correctly for the price of k-sport coilovers.
There is a large difference from what "can" be done and what "should" be done.
Re: UK Sam's 1.6 Turbo MX-3 project
Posted: November 25th, 2010, 12:32 pm
by youdirtyfox
big brake kit, not coilovers!
wich by my reckoning is around 800 pounds.
I alre3ady: a 323 mani and baffled sump wich was 5 pounds.
a vj-11 in good condition wich was 100 pounds.
330cc injectors 20 pounds.
mr2 IC 20 pounds.
all alu thin wall boost pipes we have lying around at work;)
rubber elbows off scrapyard boosted motors were 20 pounds.
still need a clutch 200 pounds
oil line 20
cooland pipe fittings 20
smaller rad 20 pounds from the breakers
and management 300 pounds if i can buy second hand.
might even get a tune up and just tip 800.
One of my freinds boosted his b6 miata with a second hand full turbo kit wich
was 500 quid second hand and that was 100% reliable for 3 years and 25K miles
so im sorry but you are wrong on this occasion! I can do it for the price of some 800 pound brakes , using no knock offs and be reliable!
Re: UK Sam's 1.6 Turbo MX-3 project
Posted: November 29th, 2010, 12:16 pm
by youdirtyfox
Re: UK Sam's 1.6 Turbo MX-3 project
Posted: December 1st, 2010, 12:06 pm
by AaronTietje
Cool pics
![Cool 8)](./images/smilies/icon_cool.gif)
Re: UK Sam's 1.6 Turbo MX-3 project
Posted: December 1st, 2010, 12:15 pm
by AaronTietje
How are you liking the ride quality of the K-sports???
Re: UK Sam's 1.6 Turbo MX-3 project
Posted: December 1st, 2010, 3:12 pm
by youdirtyfox
Ar I see why you said i need the k-sport big brake kit now.
They are not K-sports though, but XYZ super sport coilovers.
http://www.xyz-racing.com/coilover1.php
They are very plush, i love 'em. quite stiff, but not bouncy or harsh
at all, this is my daily driver car so I have them on the softest setting
at the moment -80mm, they will lower to 120mm though.
cornering has just become in another league
![Very Happy :D](./images/smilies/icon_biggrin.gif)
Re: UK Sam's 1.6 Turbo MX-3 project
Posted: December 1st, 2010, 5:23 pm
by AaronTietje
O now I see
![Shocked :shock:](./images/smilies/icon_eek.gif)
. They must be a related company because they look exactly the same.
![Shrug :shrug:](./images/smilies/shrug.gif)
Re: UK Sam's 1.6 Turbo MX-3 project
Posted: December 1st, 2010, 6:14 pm
by youdirtyfox
XYZ are lesser known in USA/Canada.
and are not related to k-sport in any way. They are similar in design, but not the same
http://www.reallymeansounds.com/forum/a ... overs.html
Re: UK Sam's 1.6 Turbo MX-3 project
Posted: December 2nd, 2010, 12:03 pm
by youdirtyfox
photoshop of somehting im thinking of doing
to the rear lights.
![Image](http://i23.photobucket.com/albums/b393/djsonofsam/Photo-0369jkied23.jpg)
Re: UK Sam's 1.6 Turbo MX-3 project
Posted: December 10th, 2010, 8:47 am
by youdirtyfox
![Image](http://i23.photobucket.com/albums/b393/djsonofsam/Photo-0369edfff2222klp.jpg)
Ok so winter project no.1 will be those rear lights as above
Have cut out 8 x 100mm roundels in vinyl using
a scalpel and metal blank as a guide, to use as
spray masks, so I can paint the existing lights using
plastic primer, satin black and then a final coat of
high gloss laqceur, also managed to cut some 100mm
roundels of flyeye, so I may tint the lights afterwards
except for the reflectors!
Winter project no. 2 involves paint matching to my car a pair
of projector headlights (buying soon as boss came through with a good bonus!) and no.3 getting a second hand bumper
to modify, as below
bonnet louvres will be stamped in just before the turbo goes in
![Very Happy :D](./images/smilies/icon_biggrin.gif)
Re: UK Sam's 1.6 Turbo MX-3 project
Posted: December 17th, 2010, 1:15 am
by ethand
wow... looks like a ferrari 550 maranello at first there in that las pic! hahaha nice....
are those neons on your rims???
Re: UK Sam's 1.6 Turbo MX-3 project
Posted: December 17th, 2010, 1:34 am
by youdirtyfox
nah It's highly reflective white rim tape wich picked
up nicely from the camera flash
![Very Happy :D](./images/smilies/icon_biggrin.gif)
Re: UK Sam's 1.6 Turbo MX-3 project
Posted: December 17th, 2010, 1:36 am
by ethand
haha ahhh cool... was gonna say... PRETTY sure that wouldnt be legal hahah
Re: UK Sam's 1.6 Turbo MX-3 project
Posted: December 17th, 2010, 1:43 am
by youdirtyfox
yeah probably not!
You can buy these sort of things though:
http://www.easychinasupply.com/productt ... 07020.html
would give the same effect, dont know how legal they are though?