Page 3 of 3

Re: LOWERING SPRINGS FOR MY MX3

Posted: January 8th, 2009, 4:18 pm
by TOOgreezy
Image

Not TOO low.. but this is the day after so it still has to settle so i guess it may go down a bit more in a couple weeks.
I think with the 17"z it should look ok

Re: LOWERING SPRINGS FOR MY MX3

Posted: January 20th, 2009, 3:50 pm
by TOOgreezy
This is after 2 weeks, i was told it takes about 2 weeks to settle.. and it doesnt look like it got any lower to me :S
Colin said he was using B&G springs 1.6 drop and his looks a lot lower..
Image

i lost my digital cam. so when i get a new one ill take some better pics
i mean its lower than stock.. but not as low as i thought it would be ! :(

Re: LOWERING SPRINGS FOR MY MX3

Posted: January 20th, 2009, 3:54 pm
by TOOgreezy
also i noticed something weird
my rear passenger side strut blew so i replaced 1 strut with the KYB gr2
all the other struts are stock.. and i noticed the side i replaced is a bit heigher so
is it because the struts new maybe.. or are the kybz made a lil longer than the stock shocks?
Im going 2 replace the other ones with the KYB as well but it makes the car a little bit higher than my stock shocks do...

Re: LOWERING SPRINGS FOR MY MX3

Posted: January 20th, 2009, 3:54 pm
by mx-3_4evr
I say get some ground controls! I have probe/MX-6, but I have not seen the ride quality since my car doesn't run yet

Re: LOWERING SPRINGS FOR MY MX3

Posted: January 20th, 2009, 3:57 pm
by TOOgreezy
mx-3_4evr wrote:I say get some ground controls! I have probe/MX-6, but I have not seen the ride quality since my car doesn't run yet
ground controls. are those the adjustable shocks?

Re: LOWERING SPRINGS FOR MY MX3

Posted: January 20th, 2009, 4:06 pm
by fowljesse
It looks like a nice natural drop. It'll be lower with your summer rims, but the wheel gap will be more.

Re: LOWERING SPRINGS FOR MY MX3

Posted: January 20th, 2009, 4:23 pm
by TOOgreezy
fowljesse wrote:It looks like a nice natural drop. It'll be lower with your summer rims, but the wheel gap will be more.
idont like it, i dont feel much lower than most of the cars i past
but im hoping when the time gets hotter outside the springs will settle a lil better and a lot more

Re: LOWERING SPRINGS FOR MY MX3

Posted: January 20th, 2009, 4:24 pm
by TOOgreezy
fowljesse wrote:It looks like a nice natural drop. It'll be lower with your summer rims, but the wheel gap will be more.
how much inches did you drop your car jesse?

Re: LOWERING SPRINGS FOR MY MX3

Posted: January 22nd, 2009, 7:24 pm
by projectzemx3
the kyb strut is not longer then stock, and even if it was it wouldnt do anything to change your ride height.

Re: LOWERING SPRINGS FOR MY MX3

Posted: January 27th, 2009, 10:37 am
by jrors
Looking at the 2nd pic... it looks low and nice to me.

Re: LOWERING SPRINGS FOR MY MX3

Posted: January 27th, 2009, 5:44 pm
by TOOgreezy
jrors wrote:Looking at the 2nd pic... it looks low and nice to me.
therres a biggg gap between wheels ill take side pics and show you

Re: LOWERING SPRINGS FOR MY MX3

Posted: January 27th, 2009, 5:49 pm
by rekognize
that's about as low it's gonna go. If you want more then you shouldve installed coilovers instead.