MX-3.com

94mx3precidia wrote:
wow, wasnt expecting it to be that cheap lol. it looks good, if it doesnt fit i could always just cut it into the size i need. If the whole kit is that cheap, the only thing im worried is that the cone filter is going to be just as cheap. for sure im going to get another filter, dont trust these ebay guys.

Yeh, a decent air filter would cost more than the whole CAI kit, which should give you an idea of how rubbish the filter that comes with the kit must be. Get a K&N and you'll be fine for a long time.

looks wicked. does the VAF just fit right in? Do you just clamp it it witht he silicone adapters?

[quote="Whisper"][quote="94mx3precidia"]

wow, wasnt expecting it to be that cheap lol. it looks good, if it doesnt fit i could always just cut it into the size i need. If the whole kit is that cheap, the only thing im worried is that the cone filter is going to be just as cheap. for sure im going to get another filter, dont trust these ebay guys.[/quote]

Yeh, a decent air filter would cost more than the whole CAI kit, which should give you an idea of how rubbish the filter that comes with the kit must be. Get a K&N and you'll be fine for a long time.[/quote]

are they all just one stock size fitting?

Depends on the size of the intake you're using. Probably a 2.5" cone filter is what you need.

The filter that came with the package seems decent too me.

Put the VAF at the end of the alu pipe and attach the filter directly to the VAF.
The silicon coupler between the alu pipe and the VAF need to be heaten up so you can bend it over, make sure to buy a bigger clip since the clips including is too small for this, but will fit at the throttle and between VAF and Filter.

Sry for my bad english etc ..

what do you mean bigger clip? the clamps that comes with the kit?(the things that tighten when you screwq them in dont know what there called)

Yea hehe whatever they are called, the clamps included is too small to fit between the alu pip and the VAF so you will need a bigger one there

Dno size atm

ok sounds good. does the VAF just fit right in?

i was just looking at this intake someone gave me http://cgi.ebay.com/ebaymotors/90-93-AC ... otohosting

now i need 3 of the silicone adapters and this kit comes with only 2. can i get these adapters somewhere else?

Do a search on ebay for "couplers" and "reducers" you can also get larger hose clamps at your local ricer shop to fit your VAF.. The size is 3.5" But you can make 4" ones work like I did if they are out of the 3.5" size.

Tunes67

k thx, im starting a new job tommorow at a auto parts warehouse, i get everything crazy cheap so ill see if they have any in stock.

bump, for curt :wink: