A forum for Appearance Discussions. (Exterior, Body Kits, & Interior)
Neil
Regular Member
Posts: 961 Joined: June 30th, 2003, 2:01 am
Location: Brandon Manitoba
Contact:
Post
by Neil » February 13th, 2006, 5:08 pm
Legato626 wrote: any news?
Still seeing whos interested. This started droping off though so hopefully thats not a bad sign.
This is a list of people who have shown Interest so far:
CF Gas Door:
Neil
hgallegos915
Legato626
jschrauwen
CF Rad Support:
Neil
Mnemonic
PATDIESEL
solo_ryder
fieromx3
jschrauwen
babyblueMX3
projectmx
Last edited by
Neil on February 13th, 2006, 6:53 pm, edited 1 time in total.
projectmx
Senior Member
Posts: 2165 Joined: December 7th, 2002, 2:01 am
Location: windsor, ontario
Contact:
Post
by projectmx » February 13th, 2006, 5:44 pm
I am inerested in the radiator support.. but not sure how quick i can come up with the cash.. on the car it will be for i'm in the middle of a bp and gtr awd swap and that alone is takin my money as i locate and aquire parts, but this is definantly on my list of goodies i want
Neil
Regular Member
Posts: 961 Joined: June 30th, 2003, 2:01 am
Location: Brandon Manitoba
Contact:
Post
by Neil » February 13th, 2006, 6:52 pm
projectmx wrote: I am inerested in the radiator support.. but not sure how quick i can come up with the cash.. on the car it will be for i'm in the middle of a bp and gtr awd swap and that alone is takin my money as i locate and aquire parts, but this is definantly on my list of goodies i want
This thread is just to gage Interest. So as long as your interested thats all we need right now!
Legato626
Regular Member
Posts: 1491 Joined: September 20th, 2004, 2:01 am
Location: Las Vegas
Post
by Legato626 » February 13th, 2006, 7:17 pm
come on more people pick the gas door! =)
1994 toyota supra single turbo
1994 Mazda MX-3 KL-ZE
If god owned a car... It would be a supra!!!
EZ_4_FUN
Supporting Member
Posts: 1026 Joined: April 2nd, 2001, 2:01 am
Location: Toronto
Contact:
Post
by EZ_4_FUN » February 13th, 2006, 7:49 pm
I'll have pictures by this friday of the actual parts for all to see.
Hang tight!
OSKY
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.
http://www.pakfeifertuning.com
PATDIESEL
Senior Member
Posts: 4476 Joined: August 13th, 2001, 2:01 am
antispam: ~SPAM*SUX~
Location: Atlanta, GA.
Post
by PATDIESEL » February 14th, 2006, 10:01 am
Are you running this Oscar?
I hope so. No offense to anyone, but I'd rather deal with a company, plus I know Oscar will sell a good quality product.
ZE -strait neck,headers,2.5 exhaust,pheno spacers,lower cross member,GC coils,MS struts,Brembo slotted rotors,filled MS mounts,SS brake/clutch lines, CAI,to rear bat reloc,Hella headlamps,Hella DE fogs 180WHP
EZ_4_FUN
Supporting Member
Posts: 1026 Joined: April 2nd, 2001, 2:01 am
Location: Toronto
Contact:
Post
by EZ_4_FUN » February 14th, 2006, 10:32 am
PATDIESEL wrote: Are you running this Oscar?
I hope so. No offense to anyone, but I'd rather deal with a company, plus I know Oscar will sell a good quality product.
Yes.
OSKY
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.
http://www.pakfeifertuning.com
MrMX3
Regular Member
Posts: 236 Joined: December 26th, 2002, 2:01 am
Location: Moncton, NB
Contact:
Post
by MrMX3 » February 14th, 2006, 6:00 pm
Put me down for 1 rad support when it's ready. I've wanted one of these for YEARS.
o0loopy0o
Regular Member
Posts: 162 Joined: March 8th, 2002, 2:01 am
Location: Vancouver
Post
by o0loopy0o » February 16th, 2006, 4:42 am
id like a rad support
TREVO123
Regular Member
Posts: 654 Joined: November 29th, 2005, 8:57 pm
Location: BC, CANADA
Contact:
Post
by TREVO123 » February 16th, 2006, 6:05 pm
I so want a CF gas door,,,but im money less right now
JM1EC-V6
Regular Member
Posts: 192 Joined: October 25th, 2005, 8:35 pm
Location: Chicoutimi, Québec , Canada
Contact:
Post
by JM1EC-V6 » February 16th, 2006, 8:20 pm
Interested in the CF radiator support.
Definitely in when they're available !
'94 Mx-3 GS-R SE, KL-ZE Interprep. (From '96 PGT KL)
1110Kg
-Interprep KL31 Spec.
ported heads, Polished combustion chamber,3 angle vlv job,10.3:1 C.R.,0.020'' O.S.,KL31 cam,-0.007'' heads,Long neck IM,KL31 TB, Hotshot headers,2.25'' exhaust,Magnaflow cat
Neil
Regular Member
Posts: 961 Joined: June 30th, 2003, 2:01 am
Location: Brandon Manitoba
Contact:
Post
by Neil » February 17th, 2006, 4:06 pm
EZ_4_FUN wrote: I'll have pictures by this friday of the actual parts for all to see.
Hang tight!
Its friday today Oscar!
PATDIESEL
Senior Member
Posts: 4476 Joined: August 13th, 2001, 2:01 am
antispam: ~SPAM*SUX~
Location: Atlanta, GA.
Post
by PATDIESEL » February 17th, 2006, 4:21 pm
"hang tight"
I"MMM loosing my grip....
Where's the pics
ZE -strait neck,headers,2.5 exhaust,pheno spacers,lower cross member,GC coils,MS struts,Brembo slotted rotors,filled MS mounts,SS brake/clutch lines, CAI,to rear bat reloc,Hella headlamps,Hella DE fogs 180WHP
EZ_4_FUN
Supporting Member
Posts: 1026 Joined: April 2nd, 2001, 2:01 am
Location: Toronto
Contact:
Post
by EZ_4_FUN » February 18th, 2006, 1:56 pm
Sorry guys,
Believe me when I say that the parts are done. Its a matter of me getting down there to pick them up.
Unfortunately I did not account for my late exam yesterday evening that ended at 6 pm ( thermodynamics... boy was it a biatch).
The next possible date for me to head down would be this coming tuesday; I'd be stopping in London, Elmira and Hamilton all in the same day.
Hang in there guys, my word is gold. I will come through this week.
OSKY
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.
http://www.pakfeifertuning.com
Yoda
Regular Member
Posts: 853 Joined: January 4th, 2003, 2:01 am
Location: Earth, solar system, Milkyway, etc
Post
by Yoda » February 18th, 2006, 8:38 pm
Out of curiosity is the current shortage of carbon fibre going to affect the price and delivery? I have been talking to a few friend composites industry both here in Canada and in the US. They are telling me that the price of standard modulus fibre has jumped from $8.00/lb to almost $12.00/lb in under a year and the price is continuing to rise. They are also saying that they are starting to limit quantities to customers and the priority industries come first (aerospace, defence, medical, etc.). They have been forced to suggest to their customers to look for alternate materials if the end users application is of a non-structural nature. Apparenently there is one end user that stockpiling much of the current world supply. They are saying supplies are only getting worse and don't see it getting better anytime soon.