Page 3 of 4
Posted: June 7th, 2005, 8:12 am
by 92_mazda_mx-3
it was a joke. i took the dash out n set em that way.
spark plug
Posted: June 7th, 2005, 9:20 am
by Legato626
Painting my spark plug wires becuase they are blue and when your engine bay is red kind of sticks out.... They are NGK spark plug wires so i dont want to replace them so i say screw it take them off give them a good cleaning sand them a little bit lay them down and give them a nice spray of red. Came out perty good.
Mine
Posted: June 14th, 2005, 12:01 pm
by Legato626
Posted: June 14th, 2005, 1:46 pm
by solo_ryder
so those are the painted wires huh? Looks ok..paintec your VC abit though.. what kinda paint u use? u think it will hold up?
painted
Posted: June 14th, 2005, 2:37 pm
by Legato626
i sprayed a little on the VC to see if it would stick. I was Meaning to take it off but I didnt get to it yet. I want to take the VC off and paint it a nice silver. The paint i used is engine paint the kind you can pick up at walmart for like 4 bucks a can. If you are going to try spark plug wires it can be a pain in the a-- to do. You ever try paining anything that has a oil ly feel to it. Doesn't paint well i can tell you that. So what i did was i took off 1 wire first and i took some soapy water and cleaed the wire off (make sure you do not get water in the wire its self) then i cleaned it with some water (no soup) and then i took a 180grade sand paper and sanded the wire a little. (give the paint something to stick to) When you paint it start with a fine coat let it dry ( I got good resalts when i let them dry for like 2-3 hours ) after that you can do some more layers. I need to do one more layer on mine but they still look good.
Posted: June 19th, 2005, 7:04 am
by rsroadkilla
Posted: June 19th, 2005, 12:42 pm
by atlantamx3
Heres my BP:
Posted: June 20th, 2005, 12:48 am
by RaverChankoMX3
Posted: November 23rd, 2005, 10:00 am
by mx3ze
Posted: November 23rd, 2005, 1:44 pm
by XxantwawnxX
Most improvement award
Posted: November 23rd, 2005, 7:11 pm
by Drewation
that is amazing
Posted: November 24th, 2005, 1:43 am
by atlantamx3
Here is my NEW BP we installed last weekend... Compare to my previous BP above /\
Posted: November 24th, 2005, 1:57 pm
by cduBBz'915
WOW Perry that BP looks verrryyy clean man! and those Martelius Headers look awesome. well for my BP i'll be getting the pacesetter, wish i could get those Martelius headers. But those cost like 600.00 USD. (made in Finland)
Posted: November 24th, 2005, 2:39 pm
by AshesofPepper
Lets see if this works...
supah ugly
Posted: November 25th, 2005, 7:13 am
by babyblueMX3
AshesofPepper wrote:Lets see if this works...
supah ugly
you need to spend less time on the internet and more cleaning your engine bay
award for dirtiest engine bay of all time !
lol just kidding, but it's true, haha