MX-3.com

Already purchased parts to be installed:

door actuators & relay for keyless entry
clear signal & side markers
SpeedHut water temp & oil pressure Gauges
dual pillar gauge pod
billet aluminum pedals
OBX Headers
front & rear control arm buhings
stainless clutch line
Bronzoil bushings
shifter extension bushing
OBX camber bolts
Ractive front & rear strut tower bars
Ground Control coilover & Tokicos

To be purchased & installed:

Pakfeifer body kit
17" Motegi rims
KLZE
Mazdaspeed motor mounts
thermo spacers
UOR underdrive pulley
Walbro 190
SRD mount member bushing
Redline Oils/Water Wetter
Gaskets
Zex wet N2O & Purge kit
Wilwood 13" brake kit
sway bar bushings
Tint windows & paint
custom interior
Mazdaspeed seats,4-point harness
Momo steering wheel
misc interior/engine bay dress items
Other misc parts

Oh man I could go on and on listing every little thing I would like to do....lol, these are the bulk so far, hope to at least have these in garage by end of year, might not get to install some of these until next year depending on cash flow and when I get parts.

Like to give thanks to MX-3.com and members for giving me the inspiration, and wish everyone good luck with theirs.

Originally posted by mx3TT:
hmm, to have my car run...

same here brotha:

want to install the following that's been sitting in my garage for a while:
- e-spec front bumper w/ amber fog lights and carbon/kevlar lip
- carbon fiber hood
- my new mazdaspeed rims (no tires yet )
- finish off my black interior
- mazdaspeed steering wheel
- mount my racing seats
- mount my 3-point harnesses
- reupholster my rear seats to black suede
- new struts
- rear strut bar
- rear GS spoiler
- carbon/kevlar rear diffuser
- old zex nitrous kit w/ new purge kit
- alpine cva-1004 lcd headunit
- alpine 6 cd/dvd/mp3 changer
- sony rear-view camera
- reupholster upper interior to gray suede
- my turbo stuff

yes lots-o-stuff and still not done!

buy a gtr and put it in my car as soon as i sell my gtx and start making 250whp easily and get some low 13's and get some 4cyl turbo mx-3 posted on the drag times.

and yes i have hands on the gtr :p

Originally posted by mitmaks:
buy headers, carb, and install them along with intake manifold in my charger, all money's going to charger now, sorry mx3

just bought wheels for...charger, now need some rubber for those suckers

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&category=43955&item=2456167886&sspagename=STRK%3AMEBWN%3AIT

but hopefully that group buy for mx3 headlights goes on and ill get a set for my baby too

get it painted/body work.
rims
put back in the interior, fix the heater.
get it dynoed/tuned and run 12's

just in....

going to install either the eunos 800 IM or the Millenia IM, whichever I can get my hands on. I want MORE power! ...

My plans for 2004: Sell my MX-3

it's gonna be a sad day

hmmm, my plans would be to get the MX3 completely outa my head, which is almost done, Sell my RSX type-S and buy either an infiniti G35 coupe M6, 350Z or a BMW 330CI or maybe an M3 if I manage to rob a bank. :p
I had enough of sinking money into stuff which i will never get back my money for it.

well my motor is at the shipping station and they will deliver it by tuesday. as soon as i install it and then dyno tune it with the haltech i will try to post my dyno sheets and hopefully they show me right at near 250 whp. wouldnt mind 240-250hp. im just glad that its a gtr with the bb turbo so i can reach that power without upgrading the turbo. YET. anyways thats my progress so far in 2004 and from here i plan on primering my whole car and getting rid of all the dents and such and getting the pak bumper and molding the sides in. install my fmic and paint the car yellow and gun metal rims black. then ill be working on the interior. those are my secrets but when im done ill have pics. hopefully this year sometime i can install my coil overs as soon as i get my shocks. well thats pretty much it but my motorwise i want about 250 to the ground with the gtr and then ill be content for awhile. motor wise im going to paint the block and head black like my gtx and then i already have the valve cover powder coated yellow and with yellow wire loom. install the metal hose sleeve kit and dip my strut bar in chrome and powder coat the ends that bolt to the bay itself yellow. and then powder coat my blaster 2 coil and msd ignition yellow to match everything and top it all off with my mazdaspeed oil cap (i have that already). then get a mazdaspeed radiator cap.

yeah thats about it. sorry its so freakin long. but i think thats it. ill post pics when i get things done.

Originally posted by natural born honda killer:
then get a mazdaspeed radiator cap.

the radiator cap is not a perfect fit. i had to do some modification to the bends in the cap to get it to fit tight, but i still haven't been able to test the cap while the car is running to see if it holds the pressure safely enough. the cap has a smaller rubber insert (that plugs the hole) than the stock rad cap. hopefully it'll still work.

Originally posted by Johns93GS:
My plans for 2004: Sell my MX-3

it's gonna be a sad day

Why are you selling it John?!

im gettin mine kitted and painted next month... and repairmy 17's and thats about it... i do like some of the gauges out there....

Originally posted by mx3TT:
Why are you selling it John?!

Hey Chris - I'm moving, and I only have space for 1 car where I'm going, and I have to keep the Bronco cuz this is New England...

It's gonna be a damn sad day

Well I bought mine as a project car a few months back. So far, bought the car, bought the power side view windows, replaced the cv joints, fixed a few small things in the interior,fixed the latchings for the hood, plastic polish (actually made for boats lol) for the headlights, steam cleaned the engine, and bought a cheap radio (it was a scrap car when I got it and had no radio) all for less than $1300...

Now trying to find someone in my area to work on my engine possibly for an engine swap and fix my timing belt. Just can't find any good mechanics that want to touch it... I don't know too much about engines but the mechanics here sound a little shady... or they straight out admit they don't want to touch a Mazda... haha anyone want to help me in this area? Haha...

In addition, I found a local junk yard with some wrecked MX-3s offering some pretty good deals on parts such as the whole interior (seats, trim, floor boards, door panels, etc) that has minimal wear and tear for $125.

In addition, buy a new passenger door thanks to the nifty t-boning that happened while in the possession of the prior owner. Fix the sunroof that my husband broke one day as it fell of the tracks and it started raining... go figure... Then when finished with all that: Paint it

So, I got a couple things in the works. Its pretty much stock parts in it right now. So, its due for some fixing. Just trying to figure out what to do since this is my first car and all...

<small>[ February 22, 2004, 09:18 PM: Message edited by: Ann ]</small>

I plan on getting my klze this summer now all i need to do is find a mechnic that can put it in my 92 gs 5 speed. Does anyone know if it can be done?