Which clutch to go with?
- marcdh
- Regular Member
- Posts: 1460
- Joined: July 26th, 2006, 3:54 pm
- Location: Belfast -Northern Ireland
- Contact:
Re: Which clutch to go with?
Exedy sell 215mm for K8 and 225mm for KL, at least over here they do. I have a k8 one sitting neglected.
AZ-3 1498cc Turbo! EVO 8 turbo and manifold, 5 stud swap, SSR Type C, DIYPNP seq Megasquirt
Mx-3 2.5 V6 Turbo 291 BHP 251 lbft @ 8psi - Retired due to rust and back at uni
View Worklog
![Image](http://marcharrington.co.uk/banner2013.png)
Mx-3 2.5 V6 Turbo 291 BHP 251 lbft @ 8psi - Retired due to rust and back at uni
View Worklog
![Image](http://marcharrington.co.uk/banner2013.png)
Re: Which clutch to go with?
Part Number: KMZ02
Specs:
Disc Size 225mm
Spline Teeth / Major Dia 22T / 15/16in
Part Number: 07095
Specs:
Disc Size 225mm
Spline Teeth / Major Dia 22T / 15/16in
http://www.exedyusa.com/oe/Clutch_Specifications
Specs:
Disc Size 225mm
Spline Teeth / Major Dia 22T / 15/16in
Part Number: 07095
Specs:
Disc Size 225mm
Spline Teeth / Major Dia 22T / 15/16in
http://www.exedyusa.com/oe/Clutch_Specifications
- marcdh
- Regular Member
- Posts: 1460
- Joined: July 26th, 2006, 3:54 pm
- Location: Belfast -Northern Ireland
- Contact:
Re: Which clutch to go with?
![Image](http://www.marcharrington.co.uk/mazda/exedy.jpg)
I'm disappointed with my own pedantry
![Laughing :lol:](./images/smilies/icon_lol.gif)
There it is then, early k8s lose out on 10mm.
AZ-3 1498cc Turbo! EVO 8 turbo and manifold, 5 stud swap, SSR Type C, DIYPNP seq Megasquirt
Mx-3 2.5 V6 Turbo 291 BHP 251 lbft @ 8psi - Retired due to rust and back at uni
View Worklog
![Image](http://marcharrington.co.uk/banner2013.png)
Mx-3 2.5 V6 Turbo 291 BHP 251 lbft @ 8psi - Retired due to rust and back at uni
View Worklog
![Image](http://marcharrington.co.uk/banner2013.png)