Clappy's 94 GS Worklog

[Clappy]

All this time has gone by and I haven't had time to make it down to see the progress of my Stealth MX. In the meantime as Dan has pointed out, i sourced out another MX3 for a winter car, since i'm going crazy not being able to drive an MX3

Finally got some time to upload a few pics.. Today I drove 2.5 hours down to plate it, but unfortunately I can't clone myself and drive two cars, so Its staying another week till I bring down a co-pilot.

Here is the car. Body is in great shape.. Has 313,XXX kms on it and still runs nice.







Its in major need of a bath, inside and out.
After driving my G5 for so long, I sat in this car today and it feels like i'm sitting on the ground. Can't wait to plow some snow with this car..

[Daninski]

I offered that car to Need4spuds about 4 years ago. I still have those seats if you want them but not for much longer. It sure would look nice with some 17's on it Everything worked great when I sold it but it needed new valve cover gaskets, they tend to leak over time into the spark plug wells. The previous owner took excellent care of the car and other than brakes and tires it needed little else when i bought it. Does it still have the Pioneer system with remote I installed?

[Clappy]

There is a gaping hole where the deck should be. Looks like there is a deck in the trunk with the OEM Springs.

I do want the seats and wheels, but i can't seem to get any time to get down there.. thats the hard part!

I fly out to Jamaica on the 26, and arrive back on the 3rd or 4th.. i will be stopping in the area then.. But that would be the earliest i would be around.

i put new winter rubber on, a new cat to pass emissions.. and a new battery.

[Daninski]

I go for cruises to Picton about every 2-3 months to do the ferry crossing just for fun. If you give me a date you'll be home I have no problem swinging by your house. We go to Costco's in Kingston every month as well so it's either 401hwy or Loyalist Parkway.

[Nd4SpdSe]

I offered that car to Need4spuds about 4 years ago.

Heh, ya, I remember that! Ended up being time for something new and RWD. I still really miss the Mx-3, but I don't regret that decision.

[Clappy]

Got my RacingHarts!

[Daninski]

Now if only you had a ZE for the car,,,,hey I know where one might be for sale

[Clappy]

I think discussions are in order.. how bout you PM some info over my way..

[Clappy]

Body work is getting started. Should be done by end of april.

[Clappy]

This is the BMW he is almost finished. Needs some more wet sanding.





Little surprised at the picture quality on the Playbook

[Clappy]

Just ordered my H&R springs. Next will be the KYB's.

Next I am going to scour for the KL ECU, get ready for engine swap.

[MrMazda92]

Any chance you'll be needing a KL02 VAF?

[Daninski]

Any chance you'll be needing a KL02 VAF?

That would be for 96-97 OBD2 right.

That red MX3 in Sidneys has KYB struts on it.

[Clappy]

I should just take a week off and tour junk yards lol.

[MrMazda92]

That would be for 96-97 OBD2 right.

That red MX3 in Sidneys has KYB struts on it.

KLDE VAF, If I'm not mistaken... Every Probe, MX6, 626 I've dug through had one.