Page 2 of 2
Re: Muttpower's 1992 MX3 GS
Posted: May 27th, 2011, 5:55 pm
by muttpower
Re: Muttpower's 1992 MX3 GS
Posted: May 28th, 2011, 11:17 pm
by AaronTietje
Re: Muttpower's 1992 MX3 GS
Posted: May 28th, 2011, 11:59 pm
by muttpower
Re: Muttpower's 1992 MX3 GS
Posted: May 29th, 2011, 8:58 pm
by muttpower
Working on installing the mirrors and projector headlights...didn't figure the mirrors would be such a PITA...turns out the stock fasteners are too short. Good thing I happened to have exactly 8 screws that were the perfect length. I'll post pix once I'm finished...
Re: Muttpower's 1992 MX3 GS
Posted: June 3rd, 2011, 7:58 am
by muttpower
Re: Muttpower's 1992 MX3 GS
Posted: June 3rd, 2011, 8:10 am
by Savin
I would highly recommend putting the core bumper back on. Even though its plastic, if you ever get in an accident, it'll do a lot better job saving you than that aluminum bar.
Now after looking at the pics a bit better, you can't do that. Replace that aluminum bar with some steel rollcage tubing and you'd be set.
![Cool 8)](./images/smilies/icon_cool.gif)
Re: Muttpower's 1992 MX3 GS
Posted: June 3rd, 2011, 8:26 am
by muttpower
That's the plan...the old strut brace is just a temp fix for the old cracked bumper support...
Re: Muttpower's 1992 MX3 GS
Posted: June 3rd, 2011, 11:33 am
by Josh
Car looks great!
I do have two suggestions; I would flat black rattle can the over-spray behind the cover to clean it up just a little bit, and maybe make an air dam to direct flow from the opening in the front bumper to the lower part of the Rad support. It would stiffen up the entire lower part of the bumper cover as well as help the large opening be more functional
![Shrug :shrug:](./images/smilies/shrug.gif)
. just a suggestion if you have not already thought of it
Good Work, it looks great! I love the color its really similar to my Kawasaki.
Re: Muttpower's 1992 MX3 GS
Posted: June 6th, 2011, 12:29 am
by muttpower