Page 2 of 2
Re: John1983 - 1992 MX-3
Posted: February 19th, 2011, 9:05 pm
by Dragon1212
john1983 wrote:Im thinking about doing flush mount led signal lights unless I can find a set of projectors for a low price with the signal built in and I have thought about going with the stock bumpers but Im kinda partial to these ones plus it gives me more of a challenge. As far as drive train goes its pretty strong but makes a squeeling noise when backing up not yet sure if its in tranny or at one of the wheels.
You sure its not just the whine the car has by default... My car whines going back wards and so does my sisters mx-3
Re: John1983 - 1992 MX-3
Posted: February 19th, 2011, 9:37 pm
by chrome730
john who are u cause were from the same hood and i havent seen ur mx around? i also am from new castle delaware.
Re: John1983 - 1992 MX-3
Posted: February 20th, 2011, 12:55 am
by john1983
Dragon1212 wrote:john1983 wrote:Im thinking about doing flush mount led signal lights unless I can find a set of projectors for a low price with the signal built in and I have thought about going with the stock bumpers but Im kinda partial to these ones plus it gives me more of a challenge. As far as drive train goes its pretty strong but makes a squeeling noise when backing up not yet sure if its in tranny or at one of the wheels.
You sure its not just the whine the car has by default... My car whines going back wards and so does my sisters mx-3
im not talking about the whine of a manual tranny it sounds kinda like bad breaks or something like a metal to metal sound its a squeel not a whine
Re: John1983 - 1992 MX-3
Posted: February 21st, 2011, 10:33 am
by marcdh
Reverse is a straight cut gear IIRC, hence the dog gear whine in reverse. Good luck with the project!
Re: John1983 - 1992 MX-3
Posted: February 25th, 2011, 1:13 am
by john1983
What is IIRC I have seen that in many posts
Re: John1983 - 1992 MX-3
Posted: February 25th, 2011, 1:22 am
by Ryan
Re: John1983 - 1992 MX-3
Posted: February 25th, 2011, 12:18 pm
by chrome730
if i re call.
Re: John1983 - 1992 MX-3
Posted: April 5th, 2011, 12:05 am
by john1983
So today I finally got some new tires mounted on my car, a set of Kumho ecsta ast 205/40/17 here are a couple pics I got while I was changing up the last tire. I plan to take some more pics Friday of inside and outside. I also think I will mount the side skirts on soon. Can any 1 tell the best adhesive to use on them cause to my understanding that is how they are supposed to be attached mo pop rivited like the previous owner did which left wholes in the car i will now have to patch Im almost tempeted to just put some screws in there seems theres already holes.
sorry i tried to resize but it didnt seem to get any smaller but you see more detail atleast