MX-3.com

Posted: **November 24th, 2009, 1:57 pm**

PATDIESEL wrote:Also, make sure you have the ball joint seated with the bolt properly. The ball joint has a groove in the shaft that the bolt should slide by to hold it in place. If it is not aligned properly you might get a pop as it moves around.

I don't think there's any extra space for the bolt to be put in any other way, it's made to be pretty snug. On a side note however, I find it scary that a small bolt like that is the only thing holding the ball joint in the knuckle

Posted: **November 24th, 2009, 2:53 pm**

How do you check the swaybar end links?

Posted: **November 24th, 2009, 7:59 pm**

Pull up and down firmly. Any sort of movement=bad. Make sure they aren't loaded. (both tires on level ground, or both in the air)

MX-3.com

popping in my front end. maybe wrong size ball joints.

Re: popping in my front end. maybe wrong size ball joints.

Re: popping in my front end. maybe wrong size ball joints.

Re: popping in my front end. maybe wrong size ball joints.