Re: Rubber Seals for Doors, Windows, Everything!!
Posted: April 26th, 2009, 3:44 pm
I'll be talking to Mazda in Amarillo on Monday and when I got a price I'll post it up.
MX-3.com
The Worlds First and Largest Mazda MX-3 Forums
https://mx-3.com/phpbb3/
Rubber Seals for Doors, Windows, Everything!!
Page 2 of 3
Re: Rubber Seals for Doors, Windows, Everything!!
Posted: April 26th, 2009, 3:46 pm
part #'s too!
Re: Rubber Seals for Doors, Windows, Everything!!
Posted: April 26th, 2009, 3:53 pm
sure no prob! 
Re: Rubber Seals for Doors, Windows, Everything!!
Posted: April 27th, 2009, 9:03 pm
For your much needed part # and $ I present for your viewing pleasure!
Windshield Molding Top E06T-50-60B1 $10.25
Windshield Molding Bottom E040-50-601B $112.27 Seems high I'll call and recheck!
Windshield Molding Sides GA2A-50-60B2 $8.63
Door Seal Left EA01-50-650C $111.38
Door Seal Right EA01-50-640C $111.38
Door Weatherstrip Left EA01-59-760D $84.40
Door Weatherstrip Right EA01-58-760D $84.40
Window Runner Left DA01-68-912B-02 $49.51
Window Runner Right DA01-68-911B-02 $49.51
Hatch Seal Upper EA01-50-611D $51.47
Hatch Seal Lower EA01-50-612D $29.46
Hatch Weatherstrip EA01-62-761C $122.78
This is Based off of him pulling my vin#
This is also the quote from the parts dept. from Gene Messer Mazda of Amarillo, TX in U.S. prices.
Windshield Molding Top E06T-50-60B1 $10.25
Windshield Molding Bottom E040-50-601B $112.27 Seems high I'll call and recheck!
Windshield Molding Sides GA2A-50-60B2 $8.63
Door Seal Left EA01-50-650C $111.38
Door Seal Right EA01-50-640C $111.38
Door Weatherstrip Left EA01-59-760D $84.40
Door Weatherstrip Right EA01-58-760D $84.40
Window Runner Left DA01-68-912B-02 $49.51
Window Runner Right DA01-68-911B-02 $49.51
Hatch Seal Upper EA01-50-611D $51.47
Hatch Seal Lower EA01-50-612D $29.46
Hatch Weatherstrip EA01-62-761C $122.78
This is Based off of him pulling my vin#
This is also the quote from the parts dept. from Gene Messer Mazda of Amarillo, TX in U.S. prices.
Re: Rubber Seals for Doors, Windows, Everything!!
Posted: April 27th, 2009, 9:08 pm
I also posted the list in my very first comment to make it easier to access!
Re: Rubber Seals for Doors, Windows, Everything!!
Posted: April 27th, 2009, 9:09 pm
ionic1000 wrote:For your much needed part # and $ I present for your viewing pleasure!
Windshield Molding Top E06T-50-60B1 $10.25
Windshield Molding Bottom E040-50-601B $112.27 Seems high I'll call and recheck!
Windshield Molding Sides GA2A-50-60B2 $8.63
Door Seal Left EA01-50-650C $111.38
Door Seal Right EA01-50-640C $111.38
Door Weatherstrip Left EA01-59-760D $84.40
Door Weatherstrip Right EA01-58-760D $84.40
Window Runner Left DA01-68-912B-02 $49.51
Window Runner Right DA01-68-911B-02 $49.51
Hatch Seal Upper EA01-50-611D $51.47
Hatch Seal Lower EA01-50-612D $29.46
Hatch Weatherstrip EA01-62-761C $122.78
This is Based off of him pulling my vin#
This is also the quote from the parts dept. from Gene Messer Mazda of Amarillo in U.S. prices.
Wow, those are surprisingly expensive. All told you're looking at $825.44 if you needed all those seals. Talk about bending you over! I'll give my car the once-over and see what I NEED, but Jeezus man I thought they'd be cheaper. I can get a decent paint job for $800! I can get struts AND springs for less than $800! I can get a BP engine for less than $800!
Call me cheap, but good lord. Regardless that it's expensive as balls, this needs to be made a FAQ or something. Someone's always looking for new seals.
Re: Rubber Seals for Doors, Windows, Everything!!
Posted: April 27th, 2009, 9:14 pm
OT but if this gets made into FAQ does that set a record in regards to my so few posts! 
Re: Rubber Seals for Doors, Windows, Everything!!
Posted: April 27th, 2009, 9:15 pm
When I got my door seals from the dealer they both came with all the clips pre-installed in the rubber. I'm pretty sure those part numbers should include all the clips. Still couldn't hurt to keep 'em, but most of my bottom clips were shot... bypreoduct of oil-spraying for Canadian winters I guess 
Re: Rubber Seals for Doors, Windows, Everything!!
Posted: April 27th, 2009, 9:16 pm
I think I'm going to stagger the purchases to soften the ouch factor!
Re: Rubber Seals for Doors, Windows, Everything!!
Posted: April 27th, 2009, 9:41 pm
I'm mostly interested in the window trim stuff, assuming its the top part...mine is almost in pieces 
How is the windshield molding split into pieces? Mine is 1 piece for the frame? Mine is coming up on the top corners, and this happened on both my MX3's...I hope a branch will fall through it so I can get it replaced by my glass coverage
My hatch stuff looks in good shape, I completely pulled it off and cleaned it...yet my hatch leaks somewhere...or it did. I have more stuff to check once I get time. My interior will be coming out for a 3rd time so I can finish soundproofing and finalizing everything for the 4th and final install...hopefully I can identify the leak and NOT have to pay outrageous prices for rubber.
How is the windshield molding split into pieces? Mine is 1 piece for the frame? Mine is coming up on the top corners, and this happened on both my MX3's...I hope a branch will fall through it so I can get it replaced by my glass coverage
My hatch stuff looks in good shape, I completely pulled it off and cleaned it...yet my hatch leaks somewhere...or it did. I have more stuff to check once I get time. My interior will be coming out for a 3rd time so I can finish soundproofing and finalizing everything for the 4th and final install...hopefully I can identify the leak and NOT have to pay outrageous prices for rubber.
Re: Rubber Seals for Doors, Windows, Everything!!
Posted: April 27th, 2009, 10:08 pm
If you look here it looks like the top continues over the sides covering the side pieces.
http://www.mx-3.com/manuals/showimg.php ... /S-023.gif
http://www.mx-3.com/manuals/showimg.php ... /S-023.gif
Re: Rubber Seals for Doors, Windows, Everything!!
Posted: May 1st, 2009, 8:55 pm
I've always wondered if you were to purchase every part new from the dealer how much more it would be over the price of the car originally?
Plus half the parts are d/c so i guess we'll never know.
Plus half the parts are d/c so i guess we'll never know.
Re: Rubber Seals for Doors, Windows, Everything!!
Posted: May 2nd, 2009, 12:10 am
to keep the rubbers happy, use silicone spray every time you wash it.
Re: Rubber Seals for Doors, Windows, Everything!!
Posted: May 22nd, 2009, 4:22 am
I am very glad that I have read your post. This really helps me to solve my problem.ionic1000 wrote:I've been looking to replace all of my rubber seals but I have one slight draw back, I can't find any new sets! Does anyone know where I could find some?
For your much needed part # and $ I present for your viewing pleasure!
Windshield Molding Top E06T-50-60B1 $10.25
Windshield Molding Bottom E040-50-601B $112.27 Seems high I'll call and recheck!
Windshield Molding Sides GA2A-50-60B2 $8.63
Door Seal Left EA01-50-650C $111.38
Door Seal Right EA01-50-640C $111.38
Door Weatherstrip Left EA01-59-760D $84.40
Door Weatherstrip Right EA01-58-760D $84.40
Window Runner Left DA01-68-912B-02 $49.51
Window Runner Right DA01-68-911B-02 $49.51
Hatch Seal Upper EA01-50-611D $51.47
Hatch Seal Lower EA01-50-612D $29.46
Hatch Weatherstrip EA01-62-761C $122.78
This is Based off of him pulling my vin#
This is also the quote from the parts dept. from Gene Messer Mazda of Amarillo, TX in U.S. prices.
Hoping that you will not stop posting useful information like this.
_________________
Stereolithography
Re: Rubber Seals for Doors, Windows, Everything!!
Posted: May 22nd, 2009, 11:56 pm
What can I say but thanks for the comment and I hope it helps you.