Mx3Kid's 93' Mx3 Project (Pics inside)
- fowljesse
- Supporting Member
- Posts: 5676
- Joined: March 17th, 2006, 2:59 pm
- Location: portland, OR
- Contact:
Re: Mx3Kid's 93' Mx3 Project (Pics inside)
I think you don't know the spoiler I'm talking about. It's fine if you don't like it, but I'm talking about this one:
'93 GS - P&P DE w/ ZE exh. cams/ pistns, KLG4 IM, 65mm TB, MSnS, Phenos, K&N RAI, UDP, Grnd wires, rear batt, filld MM, torq strt, TWM short shftr, Exedy, Lng tube hdrs 2.5" Side exhaust, H&R sprngs, Poly bushngs, strutbars, Alum. crss mmber&tiebar, 22mm swybar, solid links, Direzzas, leather int, Alpine 9805 stereo & alrm, keyless entry, 10 Boston Accoustics spkrs, Prjectrs, Blaster2, CF hood, FG hatch, Lexan
Re: Mx3Kid's 93' Mx3 Project (Pics inside)
For some reason.. i just like the clean look of no spoiler:D It doesn't even go fast enough that I need one.. but i do like that wrap around spoiler... now that im looking at it i hate the ones that stick way up in the air.. haha
CF Hood, Kenwood everything, 2.25 catback exhaust, H&R Springs, F&B Strut bars
My worklog: http://mx-3.com/phpBB3/viewtopic.php?f=46&t=68856" onclick="window.open(this.href);return false;
Good afternoon from the biggest Douch around;D
My worklog: http://mx-3.com/phpBB3/viewtopic.php?f=46&t=68856" onclick="window.open(this.href);return false;
Good afternoon from the biggest Douch around;D
Re: Mx3Kid's 93' Mx3 Project (Pics inside)
You bought a whole car just for the wing!?
CF Hood, Kenwood everything, 2.25 catback exhaust, H&R Springs, F&B Strut bars
My worklog: http://mx-3.com/phpBB3/viewtopic.php?f=46&t=68856" onclick="window.open(this.href);return false;
Good afternoon from the biggest Douch around;D
My worklog: http://mx-3.com/phpBB3/viewtopic.php?f=46&t=68856" onclick="window.open(this.href);return false;
Good afternoon from the biggest Douch around;D
- Savin
- Regular Member
- Posts: 1580
- Joined: November 18th, 2007, 3:05 pm
- Location: Crown Point, IN (Chicago area)
- Contact:
Re: Mx3Kid's 93' Mx3 Project (Pics inside)
Yes. There were other incentives to buy the car also.Mx3Kid16 wrote:You bought a whole car just for the wing!?
'95 MX-3 RS - Project "Déjà Vu" Destined for the scrapyard.
'93 MX-3 GS - SOLD!
'93 MX-3 GS SE - Parts car!
'94 MX-3 GS - Scrapped
'94 MX-3 RS - Scrapped
'96 Sunfire SE - Scrapped
'03 Sunfire SE - Deathtrap
'95 Cavalier Base - Scrapped
'94 Thunderbird LX - Collects dust
'89 Mustang GT - SOLD!
'93 MX-3 GS - SOLD!
'93 MX-3 GS SE - Parts car!
'94 MX-3 GS - Scrapped
'94 MX-3 RS - Scrapped
'96 Sunfire SE - Scrapped
'03 Sunfire SE - Deathtrap
'95 Cavalier Base - Scrapped
'94 Thunderbird LX - Collects dust
'89 Mustang GT - SOLD!
Re: Mx3Kid's 93' Mx3 Project (Pics inside)
Nice work! I wish I could get a booth in my garage.... no room though! ahah
Your the first person I have ever seen that has painted a CF hood!
Your the first person I have ever seen that has painted a CF hood!
Re: Mx3Kid's 93' Mx3 Project (Pics inside)
Yeah me and my friends took a vote.. and the carbon hood wasnt going to be anywhere as glossy as the rest of the car once it was all done and it woulda looked goofy
CF Hood, Kenwood everything, 2.25 catback exhaust, H&R Springs, F&B Strut bars
My worklog: http://mx-3.com/phpBB3/viewtopic.php?f=46&t=68856" onclick="window.open(this.href);return false;
Good afternoon from the biggest Douch around;D
My worklog: http://mx-3.com/phpBB3/viewtopic.php?f=46&t=68856" onclick="window.open(this.href);return false;
Good afternoon from the biggest Douch around;D
Re: Mx3Kid's 93' Mx3 Project (Pics inside)
Just wetsanded my car with 400 today! Pictures will be up soon
CF Hood, Kenwood everything, 2.25 catback exhaust, H&R Springs, F&B Strut bars
My worklog: http://mx-3.com/phpBB3/viewtopic.php?f=46&t=68856" onclick="window.open(this.href);return false;
Good afternoon from the biggest Douch around;D
My worklog: http://mx-3.com/phpBB3/viewtopic.php?f=46&t=68856" onclick="window.open(this.href);return false;
Good afternoon from the biggest Douch around;D
Re: Mx3Kid's 93' Mx3 Project (Pics inside)
Does anybody know if these are anygood! please check them out thank you:]
http://cgi.ebay.com/ebaymotors/NEW-Drop ... ccessories" onclick="window.open(this.href);return false;
http://cgi.ebay.com/ebaymotors/NEW-Drop ... ccessories" onclick="window.open(this.href);return false;
CF Hood, Kenwood everything, 2.25 catback exhaust, H&R Springs, F&B Strut bars
My worklog: http://mx-3.com/phpBB3/viewtopic.php?f=46&t=68856" onclick="window.open(this.href);return false;
Good afternoon from the biggest Douch around;D
My worklog: http://mx-3.com/phpBB3/viewtopic.php?f=46&t=68856" onclick="window.open(this.href);return false;
Good afternoon from the biggest Douch around;D
-
- Senior Member
- Posts: 5554
- Joined: August 25th, 2004, 2:01 am
- Location: Edmonton, Alberta, Canada
Re: Mx3Kid's 93' Mx3 Project (Pics inside)
Dropzone coilovers are a plague on the MX-3 community! My first GS had em on when I bought it and they are total crap. They went in the dumpster immediately. Ricers like em because the drop so far, but they are so stiff that it's like riding a skateboard...except without the springiness of the board.
94' RS/GS/MS/CF Monster Turbo...coming soon.
93' GS SE, the Black Beast, the former love of my life...soon to be gutted and crushed.
94' GS, black on black, now in several small pieces...and one large crushed piece.
2007 Mazda3 GT Sport --- super fun
2004 Honda RC51 --- Lost forever to some theavin' bastard
My Worklog
My feedback thread
Never attribute to malice that which can be adequately explained by stupidity.
93' GS SE, the Black Beast, the former love of my life...soon to be gutted and crushed.
94' GS, black on black, now in several small pieces...and one large crushed piece.
2007 Mazda3 GT Sport --- super fun
2004 Honda RC51 --- Lost forever to some theavin' bastard
My Worklog
My feedback thread
Never attribute to malice that which can be adequately explained by stupidity.
- Nd4SpdSe
- Senior Member
- Posts: 11212
- Joined: May 25th, 2002, 2:01 am
- Location: Québec City, Quebec, Canada
- Contact:
Re: Mx3Kid's 93' Mx3 Project (Pics inside)
You'd be MAD to get those...seriously!
Here's why:
http://www.mx-3.com/phpBB3/viewtopic.php?f=20&t=47776" onclick="window.open(this.href);return false;
Here's why:
http://www.mx-3.com/phpBB3/viewtopic.php?f=20&t=47776" onclick="window.open(this.href);return false;
1992 Mazda Mx-3 GSR - 2.5L KLZE : Award Winning Show Car & Race Car ['02-'09] (Retired)
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
- fowljesse
- Supporting Member
- Posts: 5676
- Joined: March 17th, 2006, 2:59 pm
- Location: portland, OR
- Contact:
Re: Mx3Kid's 93' Mx3 Project (Pics inside)
They were *almost* my 2nd mod, but just looking at them (not knowing anything about coilovers), I could tell they wouldn't work.
'93 GS - P&P DE w/ ZE exh. cams/ pistns, KLG4 IM, 65mm TB, MSnS, Phenos, K&N RAI, UDP, Grnd wires, rear batt, filld MM, torq strt, TWM short shftr, Exedy, Lng tube hdrs 2.5" Side exhaust, H&R sprngs, Poly bushngs, strutbars, Alum. crss mmber&tiebar, 22mm swybar, solid links, Direzzas, leather int, Alpine 9805 stereo & alrm, keyless entry, 10 Boston Accoustics spkrs, Prjectrs, Blaster2, CF hood, FG hatch, Lexan
Re: Mx3Kid's 93' Mx3 Project (Pics inside)
Alright thanks guys haha, Whats the best lowering springs to use with out breakin my budget, i really want to drop this thing.
CF Hood, Kenwood everything, 2.25 catback exhaust, H&R Springs, F&B Strut bars
My worklog: http://mx-3.com/phpBB3/viewtopic.php?f=46&t=68856" onclick="window.open(this.href);return false;
Good afternoon from the biggest Douch around;D
My worklog: http://mx-3.com/phpBB3/viewtopic.php?f=46&t=68856" onclick="window.open(this.href);return false;
Good afternoon from the biggest Douch around;D
- rekognize
- Regular Member
- Posts: 809
- Joined: September 2nd, 2006, 10:58 am
- Location: Toronto, ON
- Contact:
Re: Mx3Kid's 93' Mx3 Project (Pics inside)
Umm why are you grinding on that fender without first masking the headlight so you don't damage it?Mx3Kid16 wrote:I began fixing the front fenders that were crunched in
And say goodbye to your rotors, you also forgot to replace the lug nuts so the rotor will stay in place and not mess up the pads.
-
- Senior Member
- Posts: 5554
- Joined: August 25th, 2004, 2:01 am
- Location: Edmonton, Alberta, Canada
Re: Mx3Kid's 93' Mx3 Project (Pics inside)
Rotors are probably corrosion welded to the hubs...I needed an air hammer to get mine off.
94' RS/GS/MS/CF Monster Turbo...coming soon.
93' GS SE, the Black Beast, the former love of my life...soon to be gutted and crushed.
94' GS, black on black, now in several small pieces...and one large crushed piece.
2007 Mazda3 GT Sport --- super fun
2004 Honda RC51 --- Lost forever to some theavin' bastard
My Worklog
My feedback thread
Never attribute to malice that which can be adequately explained by stupidity.
93' GS SE, the Black Beast, the former love of my life...soon to be gutted and crushed.
94' GS, black on black, now in several small pieces...and one large crushed piece.
2007 Mazda3 GT Sport --- super fun
2004 Honda RC51 --- Lost forever to some theavin' bastard
My Worklog
My feedback thread
Never attribute to malice that which can be adequately explained by stupidity.
Re: Mx3Kid's 93' Mx3 Project (Pics inside)
Why are you so sure of your self? I dont like your negative reinforcement that is incorrect:] Maybe you dont have enough self control to trust yourself with a grinder to not do something like that! And the second statement you made.. I usually tap the lug nut bolt things (dont kno what there called) with a hammer to get it off.rekognize wrote:Umm why are you grinding on that fender without first masking the headlight so you don't damage it?Mx3Kid16 wrote:I began fixing the front fenders that were crunched in
And say goodbye to your rotors, you also forgot to replace the lug nuts so the rotor will stay in place and not mess up the pads.
CF Hood, Kenwood everything, 2.25 catback exhaust, H&R Springs, F&B Strut bars
My worklog: http://mx-3.com/phpBB3/viewtopic.php?f=46&t=68856" onclick="window.open(this.href);return false;
Good afternoon from the biggest Douch around;D
My worklog: http://mx-3.com/phpBB3/viewtopic.php?f=46&t=68856" onclick="window.open(this.href);return false;
Good afternoon from the biggest Douch around;D