Page 2 of 2
Re: [WTB] VRIS actuators and bracket for kl47 IM
Posted: October 11th, 2008, 2:03 am
by solo_ryder
No, I have solenoids from my k8 hooked up all ghetto right now. but I would like to get my hands on some kl47 IM brackets and solenoids + tubing if possible!
Re: [WTB] VRIS actuators and bracket for kl47 IM
Posted: October 11th, 2008, 4:36 pm
by nsngarage
The ones i probably have are from a DE IM.. Im assuming they're different from a ZE IM right? If not i'll snap some pics for ya
Re: [WTB] VRIS actuators and bracket for kl47 IM
Posted: October 11th, 2008, 5:04 pm
by solo_ryder
Yea, ZE im, post up pics
Re: [WTB] VRIS Solenoid Bracket For kl47 IM
Posted: March 9th, 2009, 12:27 pm
by solo_ryder
TTT
Help me out guys!
Re: [WTB] VRIS Solenoid Bracket For kl47 IM
Posted: March 13th, 2009, 3:42 pm
by solo_ryder
TTT
Re: [WTB] VRIS Solenoid Bracket For kl47 IM
Posted: March 14th, 2009, 10:18 pm
by solo_ryder
TTT
Re: [WTB] VRIS Solenoid Bracket For kl47 IM
Posted: March 23rd, 2009, 3:57 pm
by solo_ryder
TTT - anyone? I need this!!
Re: [WTB] VRIS Solenoid Bracket For kl47 IM
Posted: March 23rd, 2009, 4:35 pm
by onlytrueromeo
I couldn't find it either - I just hung the solenoids behind the manifold and zip tied them so they don't move - you can't see them from the front.
As for the actuator itself, I drilled out the holes on a normal one to make it fit, then painted them so they look nice and not all chewed up! If you drill out the holes it works perfect.
Hope that helps, I know you don't like to ghetto fix things, but may save you some hassle!
Re: [WTB] VRIS Solenoid Bracket For kl47 IM
Posted: March 23rd, 2009, 4:39 pm
by solo_ryder
Thanks man
My solenoids work fine and all that, its just that they are hanging there and stuff and I dont like that I would rather have a bracket to clean that up.
Re: [WTB] VRIS Solenoid Bracket For kl47 IM
Posted: March 23rd, 2009, 4:49 pm
by onlytrueromeo
Yeah I hear ya. I couldn't get my actuators to work right until I modified the one bracket - I was using the ones from my K8 and it doesn't keep the shutter closed unless you drill them out.
Why not try to make a bracket? Just get some sheet metal, the solenoids themselves have a plastic clip on them, you can make cheap brackets and paint them, so you could mount them anywhere. Hose and couplers can be had cheap at autoparts stores. Come to think of it, I don't know why I didnt do that!
Good luck finding them!
Re: [WTB] VRIS Solenoid Bracket For kl47 IM
Posted: March 24th, 2009, 10:12 am
by solo_ryder
I need this as a potential gf looked over the motor and was NOT impressed i didnt have a kl47 IM bracket to hold my VRIS solenoids. She pointed it out now I am ALONE. Help me out guys.
jk....
Re: [WTB] VRIS Solenoid Bracket For kl47 IM
Posted: March 24th, 2009, 10:36 am
by onlytrueromeo
Jeez what a materialistic girl!