Page 2 of 2
Re: Any one who has replaced clutch pls help
Posted: April 23rd, 2008, 7:58 pm
by Savin
Moons, I'm not sure breaking your nuts is a good thing
Re: Any one who has replaced clutch pls help
Posted: April 24th, 2008, 11:06 am
by marcdh
my air impact wrench failed at this, it's hardly low spec either. I got my brother to hold the brakes and I used a breaker bar with 6' scaffolding
I've also tried using a car jack under the end of the breaker bar, which failed too. My car was lifting up before the bolts broke loose
Make sure to undent the notch too. I also melted wax into the threads, may or may not have helped...was desparate!
Re: Any one who has replaced clutch pls help
Posted: April 24th, 2008, 7:36 pm
by Ryan
Penetrating Oil, WD40... and if you can't crack it with an air gun or a 6' torque bar, its probably welded on
Re: Any one who has replaced clutch pls help
Posted: April 24th, 2008, 9:29 pm
by ElectricEnergy
My drivers side one was stuck, so i just took the whole strut and hub out. Not much harder than spending an afternoon screwing around with that damn stuck nut.