Page 2 of 3

Re: Mikals 92 Mazda Mx3 rs

Posted: May 22nd, 2008, 11:38 pm
by Mikal
Finally heres a couple of pics of the car whil it was on the ramps getting the gas tank changed (in my grandma's garage because theres tons of room and she doesn't drive). Oh and first thing after I got it off the ramps I took those hub-caps off.

Image


Image


Image

Re: Mikals 92 Mazda Mx3 rs

Posted: May 22nd, 2008, 11:54 pm
by Mikal
Well had a little time after posting the other stuff so I took 2 quick shots of the xplods.

Image


Image

Re: Mikals 92 Mazda Mx3 rs

Posted: May 22nd, 2008, 11:57 pm
by Ryan
Good luck with the car... its just like mine, or exactly, if you've a SOHC. Looking sweet.... and I like the rims, awesome choice. and I've the older generation of the Xplodes, 6x9. Plenty loud enough for me :)

Re: Mikals 92 Mazda Mx3 rs

Posted: May 23rd, 2008, 12:00 am
by Mikal
Just to make sure aren't the speaker sizes in the mx3 rs 6 1/2 and 5 1/4?
I hope the source for this info. was valid. If not..........

Re: Mikals 92 Mazda Mx3 rs

Posted: May 23rd, 2008, 12:40 am
by Ryan
Oh, I custom mounted mine. I think you have the sizes correct. Sorry for worrying you there :P
5 1/4's up front and either 5 1/4 or 6 1/2's in the back. You're good to go.

Re: Mikals 92 Mazda Mx3 rs

Posted: May 23rd, 2008, 3:39 pm
by xxwhiteboyjim22xx
yea its 6 1/2 in back cuz i bought the 5 in my 92 soch and they were to small but they still work.

Re: Mikals 92 Mazda Mx3 rs

Posted: May 24th, 2008, 12:11 am
by Ryan
I've heard of guys cutting that plastic brace and screwing 6x9's into there, but felt it was redundant because there aren't enough holes to let the sound out :) You can make any size fit, you just might have to modify it a bit.. I know mine mounting points are shot. Stock, I believe, they screw to the cover. All the towers that they are supposed to screw into broke off on mine, or someone broke them... so I just had 6 1/2's screwed to the plastics. It worked, but I wasn't happy with it...

Re: Mikals 92 Mazda Mx3 rs

Posted: May 24th, 2008, 11:01 am
by Mikal
Well guys just for an update, tomorrow I should at least be putting in the front and rear speakers.
And possibly if I have time may install deck too. Also this week I should be getting a new battery
and tires for the rims.

Re: Mikals 92 Mazda Mx3 rs

Posted: May 30th, 2008, 9:58 pm
by Mikal
Ok guys just an update today I took my car to get the windshield resealed. So they
are going to have my car until about Monday.

Re: Mikals 92 Mazda Mx3 rs

Posted: June 8th, 2008, 12:06 am
by Mikal
Alright it's been a while since I gave an update, but the windshield replacement took longer than expected.
I got my car back today and immediately got to work.
Here a couple things I got done today;
-front speakers
-deck
-removed most of the dash cleaned it and reassembled
after deck and speaker installation was complete

So I'm about to first post up pics of the stuff I put on today
Second I'll post up pics of a little amateur photoshoot

Re: Mikals 92 Mazda Mx3 rs

Posted: June 8th, 2008, 12:10 am
by Mikal
Sony xplodes in the front
Image

Alpine Deck
Image

Image

Re: Mikals 92 Mazda Mx3 rs

Posted: June 8th, 2008, 12:26 am
by Mikal
Image


Image


Image


Image


Image


Image


Image

Re: Mikals 92 Mazda Mx3 rs

Posted: June 8th, 2008, 12:30 am
by Mikal
Also forgot to add the grand total is approximately $1800

Re: Mikals 92 Mazda Mx3 rs

Posted: June 8th, 2008, 1:04 pm
by npspears
Mikal wrote:Also forgot to add the grand total is approximately $1800
Grand total for.....? all the speakers, deck, and windshield replacement?

Re: Mikals 92 Mazda Mx3 rs

Posted: June 8th, 2008, 1:16 pm
by tmac4t4
hey nice lookin mx,,did you ever fix the floor issue?
1800 seems like alotta money spent so far is that mainly on audio?