clunking noise..?
-
rebel_princess_lynz
- Regular Member
- Posts: 85
- Joined: June 14th, 2005, 8:24 pm
- Location: Peterborough, ON
- Contact:
poop
yeah they are broken...i'm callin my mechanic anyways...he'll do it quicker, cheaper, and will put time in effort into it, and not to mention care...unlike them, i trust him more anyways
-
JWMX3
- Senior Member
- Posts: 2060
- Joined: March 23rd, 2004, 2:01 am
- Location: Grassie, Ontario
- Contact:
it should run you about 250cdn for installing struts and springs *labour only*
4 new struts (kyb) will run you about 250, and im sure you can get stock springs from this forum for dirt cheap if yours are broken
anything alse wrong with it ?
4 new struts (kyb) will run you about 250, and im sure you can get stock springs from this forum for dirt cheap if yours are broken
anything alse wrong with it ?
94' Mx3 GS 0-60 in 7.53s [5 spd conversion / Rebuilt 2.5 KL]
-
rebel_princess_lynz
- Regular Member
- Posts: 85
- Joined: June 14th, 2005, 8:24 pm
- Location: Peterborough, ON
- Contact:
poop
i dunno, i'll have to get the quote out of the car, the guy told me that if i got used stuff that it will prolly be just as rotten and will just break again further down the road, which is a very valid point, i think i would feel safer and better with new stuff, and they come with a 2 year warranty...
The front springs were a Mazda recall and can be replaced free of charge at your local Mazda stealership. http://mx-3.com/recalls/coilsprings.cfm
-
rebel_princess_lynz
- Regular Member
- Posts: 85
- Joined: June 14th, 2005, 8:24 pm
- Location: Peterborough, ON
- Contact:
poop
OMG...i love you...that's all i have to say!!