Page 2 of 2
Posted: March 19th, 2006, 2:42 am
by Legato626
Yes but the end of this year i should have my KL-ZE but I had the option to get one but I picked lets just modded the hell out of the K8 making sure I dont lose any money out of it all the modded will be able to go to the KL-ZE. But I am just doing this for fun Just to see what this little motor can do when I can throw a lot of stuff on it. So then when I do get my ZE I can see the differents of the car with that motor. But when it gets done here at the end of this month I will give you a list of all the moddes and i will have a video of the dyno. It should be cool to see what the little engine that could! =)
Posted: March 19th, 2006, 12:12 pm
by lakersfan1
Put down the crack cocaine. You are NEVER going to get 160WHP out of a N/A K8 unless you go for complete race mod with ridiculous cams and up the RPM to about 10,000 RPM with some ridiculous compression pistons. Corksport already modded a K8 with thier project MX-3, and basically got NOWHERE with thier mods. You can look at thier dyno plots they did everytime they did a mod.
Posted: March 19th, 2006, 8:02 pm
by hgallegos915
true im not the negative person but a k8 doung 160 hp even at the crank i dunno..i see you making around 145 at the crank with headers full exhaust, cai, lightweight flywheel and stripping the interior. Its still worth it since well ull be swapping over why not, just dont use a de manifold because vris points are off, do the hei mod to kill the "heat = slowness" symptoms.
Posted: March 19th, 2006, 8:38 pm
by Legato626
Ya like I said I am just doing this for fun just to see what it has =) But when I get it dynoed will it show hp at the wheels and the crank?
Posted: March 19th, 2006, 8:46 pm
by precidian
So have you done a base run? do you know how much horepower you are starting off with at the wheels?
Posted: March 19th, 2006, 8:52 pm
by Legato626
No I couldn't THe dyno just got into town and my car was already taken apart. If not I would have done it.
Posted: March 19th, 2006, 9:05 pm
by Juans_93_MX3
Go ahead waste your money
So what bolt-ons are you planning for the K8?
Posted: March 19th, 2006, 10:20 pm
by Macpherson MX-3
Is the K8 that bad
Posted: March 19th, 2006, 10:24 pm
by relisys_3200
Macpherson MX-3 wrote:Is the K8 that bad
yes
Posted: March 19th, 2006, 10:29 pm
by Macpherson MX-3
Happy i am doing the swap. did not think it was that bad
Posted: March 19th, 2006, 10:34 pm
by relisys_3200
its a decent engine for a daily driver....but if you want to start modding it, or drive with a little more "spirit"...then a swap is definantly the best bang for the buck