Page 2 of 2
Posted: April 18th, 2005, 2:38 pm
by solo_ryder
May not work for the chrom ones......cause the stupid chrome stuff tends to peel and bubble when wet. I am not sure what the CF and the black ones are made of though....
Posted: April 19th, 2005, 2:15 pm
by Nd4SpdSe
I've always wondered that if you have them ventilation if they would not fog up...normally condensation of cause by a difference in temperature. Perfect example is if you have a cold drink in a glass on a hot summer day, the outside of the glass will condense. If you drill holes, not only should would there be airflow to equalise the temperature difference, theoretically preventing it from fogging up, but it will give the trapped moisture to escape instead of condensing on the lense....just my C$0.0248470
Posted: April 21st, 2005, 9:26 pm
by exdream_mx3
I drilled the holes in mine worked for like a month of so but then they fogged up again only 10 x worse!!!! Finally took them off!! Not worth the hassle in my opinion.
Posted: April 22nd, 2005, 4:41 pm
by solo_ryder
Ya i was thinking that, but if its completly sealed then moisture cant get in.
Posted: April 22nd, 2005, 5:30 pm
by ninjajim4
exdream_mx3 wrote:I drilled the holes in mine worked for like a month of so but then they fogged up again only 10 x worse!!!! Finally took them off!! Not worth the hassle in my opinion.
good to kno it doesnt work... other ppl have been advising that too. thnx for sharing
Posted: April 23rd, 2005, 9:44 am
by exdream_mx3
no problem just wanted to share my lovely experiences with these p.o.s lights!!!!