Jim, pm sent reference this postneutral wrote:According to the Mazda Electronic Parts Catalogue (Europe Version) the exact part name is "Garnish, Lift Gate" (there's lots of other irrelevant little bits in the MEPC called "garnish" too) and part # is EA01-50-810B. Might be worth lurking on ebay as these items come up regularly for low cost or post a WTB on the BB. Mazda will want your left nut and beaucoup $$ for a new one from them.
Where can I get a Mazdaspeed style spoiler in the UK?
-
jschrauwen
- Forum Moderator
- Posts: 6052
- Joined: September 27th, 2003, 2:01 am
- Location: Frankford, Ontario, Canada
- Contact:
'92 GS-ZE - sold, '95 GS - sold, '02 Protege LX - Daughter, '00 Audi A4 2.8 QTip, Ducati TT2
90 JDM RHD 300ZX TT - 572.1 RWHP | 590.0 RWTQ | 21 PSI | Pump gas
90 JDM RHD 300ZX TT - 572.1 RWHP | 590.0 RWTQ | 21 PSI | Pump gas
-
garfy1981
- Regular Member
- Posts: 288
- Joined: September 27th, 2004, 2:01 am
- antispam: ~SPAM*SUX~
- Location: UK, South-East
- Contact:
Got an email back from pakfifer, there is no uk distributor for that spoiler, its a unfortunate case of pay the shipping costs 
2.5 Ze straight neck, blitz intake, mazdaspeed engine mounts, fidenza flywheel, CM II Clutch, KL-36 ecu, Magnecor 8mm Leads, Battery Relocation. Hotshot headers, 2.5 mandrel bent stainless exhaust, hi-flow cat, Speed hut dials, custom coilover set up. Custom willwood big brake conversion.
-
garfy1981
- Regular Member
- Posts: 288
- Joined: September 27th, 2004, 2:01 am
- antispam: ~SPAM*SUX~
- Location: UK, South-East
- Contact:
Good news, ive spoke to a guy in manchester and he is getting the moulds to make a high level spoiler and garnish similar to the mazdaspeed spoiler for the mx-3 the guide price he has given me is £150
primered and delivered. At the moment i cant revel his email address until every thing is off the ground. But sounds promising. His expecting to get the moulds in about 2-3 weeks.
primered and delivered. At the moment i cant revel his email address until every thing is off the ground. But sounds promising. His expecting to get the moulds in about 2-3 weeks.
2.5 Ze straight neck, blitz intake, mazdaspeed engine mounts, fidenza flywheel, CM II Clutch, KL-36 ecu, Magnecor 8mm Leads, Battery Relocation. Hotshot headers, 2.5 mandrel bent stainless exhaust, hi-flow cat, Speed hut dials, custom coilover set up. Custom willwood big brake conversion.
-
mx almere
- Regular Member
- Posts: 227
- Joined: January 28th, 2004, 2:01 am
- Location: the Netherlands
- Contact:
If that doesn't work, try http://www.jeroentje.nl. Shipping from holland cannot be that much either.
-
garfy1981
- Regular Member
- Posts: 288
- Joined: September 27th, 2004, 2:01 am
- antispam: ~SPAM*SUX~
- Location: UK, South-East
- Contact:
The guy from manchester has emailed us to confirm that he has the moulds to make the mazdaspeed style spoiler. He is also buying moulds to make 2 or 3 bodykits for the mx-3. A plus for the uk that finally more bodykits without the high shipping costs !
If you email gary lee at imexdesigns@yahoo.co.uk he can forward pictures of the bodykits and future mx-3 kits. also include that you are from mx-3.com.
Im nothing to do with seller, only that ive been in constant contact providing him existing body kit designs from corksport, psi tuning, pakfifer etc.
If you email gary lee at imexdesigns@yahoo.co.uk he can forward pictures of the bodykits and future mx-3 kits. also include that you are from mx-3.com.
Im nothing to do with seller, only that ive been in constant contact providing him existing body kit designs from corksport, psi tuning, pakfifer etc.
2.5 Ze straight neck, blitz intake, mazdaspeed engine mounts, fidenza flywheel, CM II Clutch, KL-36 ecu, Magnecor 8mm Leads, Battery Relocation. Hotshot headers, 2.5 mandrel bent stainless exhaust, hi-flow cat, Speed hut dials, custom coilover set up. Custom willwood big brake conversion.
-
garfy1981
- Regular Member
- Posts: 288
- Joined: September 27th, 2004, 2:01 am
- antispam: ~SPAM*SUX~
- Location: UK, South-East
- Contact:
Forgot to mention he has also agreed to give 15% off to club members. Just email username and mention mx-3.com
2.5 Ze straight neck, blitz intake, mazdaspeed engine mounts, fidenza flywheel, CM II Clutch, KL-36 ecu, Magnecor 8mm Leads, Battery Relocation. Hotshot headers, 2.5 mandrel bent stainless exhaust, hi-flow cat, Speed hut dials, custom coilover set up. Custom willwood big brake conversion.