MX-3.com

i got mine from corksport

hey curt, get an unsprung 4 puck disk and run it in you stock pressure plate(250$cnd)

we did it with my buddies talon an it works perfect, but you have to get the flywheel decked down for the skinnier friction disk

peace in the east*hic*

what do you mean by "get the flywheel decked"?

do you mean get it re-surfaced/machined?

get the distance between the flywheel surface and where the pressure plate bolts on reduced because the friction material is thinner and this will make the "peddle higher"

more travel of the clutch pedal before the clutch disengages and a higher clamping force.

machine shops will know what to do

i still need another 300 kms on my clutch before i rip it so who wants to goto the track on april 10 if the weather is nice?
it'll be my first time

That is easter long weekend. I have to drive out and spend time with my parents.

<small>[ April 02, 2004, 06:43 PM: Message edited by: curtklze ]</small>

i would but its a little late, i still have my snow tires on, in which they are calling for snow this week, and on Friday they're calling for a high of 3*C and a low of 1*C, not the best outdoor weather

i am thinking of the 10th

is the strip open??

calling for sun and cloud 6', i need to try the 7 out