MX-3 Door Conversion

playaa · Post by **playaa** » September 2nd, 2003, 10:18 pm

i would be interested

smooth933 · Post by **smooth933** » September 2nd, 2003, 11:23 pm

i would cop a set from you and know atleast one other person. let me know .

David Witherow · Post by **David Witherow** » September 3rd, 2003, 12:36 am

the decah kits will work on the mx-3......

tocixxx · Post by **tocixxx** » September 4th, 2003, 2:41 am

Yeah, but if somebody makes a BOLT-ON-Kit for the MX-3 with a reasonable price, it would be really nice.

fictionaldaydream · September 4th, 2003, 2:58 am

I be interested, but just won't say anything untill the price is final.

mx34u2nve · Post by **mx34u2nve** » September 4th, 2003, 2:59 am

oh keep me updated wyldside and since i live close if you get a hookup for it ill likely get it from you. and noo offence "mx3 4u2NV" but you so stole my name

wyldside · Post by **wyldside** » September 4th, 2003, 9:41 am

No problem Sean. Later this month I'll be testing a prototype version on Justin's car. He doesn't drive it during the winter so it's the perfect car to work on. I want to have these kits in full production by next Spring.

Sam Baker · Post by **Sam Baker** » September 4th, 2003, 11:13 pm

oh man sick!
i been freakin waiting for somebody to do this for sooo long!! dude when u get it installed, post tons of pix and i will say "wow tight!" and buy one like dat!
~ sam

mitmaks · Post by **mitmaks** » September 4th, 2003, 11:25 pm

hey id be interested in it too, would they be bolt on, easy install?

wyldside · Post by **wyldside** » September 5th, 2003, 12:56 am

That's the plan. I want it to require as little effort as possible. That's why this prototype is taking so long. It also takes a lot to calculate all the propper forces and angles. When it's done the kit may just consist of 2 parts and some bolts for each door.

Curtis · Post by **Curtis** » September 5th, 2003, 1:01 pm

hey guys i been reading about this Lambo door conversion and i found a site where they sell "universal" Lambo conversion kits! they have manuel or remote kits.it says it's available for all makes and models? well...i dont know if it's true? do you think it would really work?

.. kinda pricey though if you ask me huh, check it outManuel door kitRemote door kit

hotsiit · Post by **hotsiit** » September 5th, 2003, 3:22 pm

i would be very interested also!!

cjthor · Post by **cjthor** » September 5th, 2003, 3:25 pm

<blockquote>quote:<hr>Originally posted by NewType2003:
hey guys i been reading about this Lambo door conversion and i found a site where they sell "universal" Lambo conversion kits! they have manuel or remote kits.it says it's available for all makes and models? well...i dont know if it's true? do you think it would really work? .. kinda pricey though if you ask me huh, check it outManuel door kitRemote door kit<hr></blockquote>
That autoloc company is in my town! Imagine that ....Hillsboro Oregon.

wyldside · Post by **wyldside** » September 8th, 2003, 9:53 am

Their kit will work but it doesn't look as good. I'm not too fond on the hinge system they use since it is difficult to clear the fender without scraping on our cars. Also, it will depend if you want to see this big gas strut bolted to your car's lower hinge which I think that looks ugly. That's why I've made my own design.[ September 08, 2003: Message edited by: WyldSide ]

Csillag · Post by **Csillag** » September 8th, 2003, 5:05 pm

If it turns out as good as you make it sound... Definately interested over here, and I can safely say there'd be at least 3 others I could vouch for that'd be interested too

MX-3.com

MX-3 Door Conversion

Re: MX-3 Door Conversion

Re: MX-3 Door Conversion

Re: MX-3 Door Conversion

Re: MX-3 Door Conversion

Re: MX-3 Door Conversion

Re: MX-3 Door Conversion

Re: MX-3 Door Conversion

Re: MX-3 Door Conversion

Re: MX-3 Door Conversion

Re: MX-3 Door Conversion

Re: MX-3 Door Conversion

Re: MX-3 Door Conversion

Re: MX-3 Door Conversion

Re: MX-3 Door Conversion

Re: MX-3 Door Conversion