MX-3.com

Any new updates guys? Cmon I know there are lots of turbo MX3s out there these days.

Make/Model

92 MAZDA MX-3 BP-DE (boosted)/G-series swap

Engine Bay

93 BP-DE
ELECTROMOTIVE TEC II STANDALONE
Tigger wheel kit along with a Udox UDP
Stock internals never been open its really a junk yard BP.
Custom alm. intake manifold.
GM 3 bar MAP sensor
5.0 mustang T.B.
Custom turbo manifold
57 TRIM turbo
38mm Tial wastegate
50mm Tial BOV
2.5in. intercooler piping
Precision Turbo 26 3/4" L x 6 1/4" H x 3 1/2" D FMIC
2.5in. down pipe open exhaust.
RM 2.5in catback exhaust system i use if often mostly off all the tyme.
R.C. 880cc injecters
stock fuel rail and FPR
MSD 8.5MM WIRES
NGK V-POWER R5671A-8 PLUGS

Drive train

G-series trans swap
soild rear trans mount
EXTREME ACT clutch rated at 400lb's of torque
AJUSTABLE SHORT SHIFTER
for track use 15in GS rims on slicks
14in mazda miata drag radials

EQUUS GUAGES, AUTOMETER TECH / BOOST GUAGE

STOCK body stock suspension. im all bout power the hell wit looks waste of money in my opinion.


Parts the i got rid off using the standalone
TPS
Dizzy
Vaf meter
wiring harness and ecu
A/C system
PS system
all the crap under the dash all gone
all gone shyt i didn't need or didn't want.

UP date on parts

Precision Turbo SC 67 turbo
Precision Turbo 1000cc injecters
Precision Turbo 31 1/2" L x 8" H x 3 1/2" D FMIC

is that a custom made intake manifold?

does having both sides of the valve cover connected to the same air line cause any issues?

[quote="nolig2278"]is that a custom made intake manifold?

does having both sides of the valve cover connected to the same air line cause any issues?[/quote]

yes thats a custom intake manifold and i will be redesigning the manifold in a month or two.


NO it does bot cause a issuse, i just didn't want the pressure going back into the intake manifold.

Well the IHI hybrid turbo is finally here and going on shortly. Here are some pics showing it with the stock IHI VJ-11 turbo and by itself.

Any updates from your turbo folks?

New bigger boost guage sticker on back of mx-3 strip rear end and painted intake manifold bronze to match intercooler and valve cover. new vaccum blue lines, better suited msd wires. new backet to hold my tec system made that myself.

I need more power guys 12 sec's ain't fast to me any more.

Looking good limegreen mx-3, how is the other project coming along, the turbo SOHC MX3?

nolig2278 wrote:is that a custom made intake manifold?

does having both sides of the valve cover connected to the same air line cause any issues?

well its not suppose to be rnu like that. seems liek he is pulling vacume from both sides. One is suppose to pull vac(the one with the valve) and the other is suppose to let filter air back in...so the other can keep pulling vacume. that way it circulates and keeps sludge build up and other nastys from happening.

Upon further inpection it does not seem like he is pulling vac for the PVC system at all because he is not hooked it up after the TB.

Bump

Megasquirt V3.0 ordered, bigger injectors ordered, new hybrid turbo to be installed. Time to stop playing around and get serious.

osargeant wrote:Megasquirt V3.0 ordered, bigger injectors ordered, new hybrid turbo to be installed. Time to stop playing around and get serious. :twisted:

and its about damn tyme i might say my 12 sec mx-3 just doesn't cut it for me anymore. i don't get a rush anymore i don't get scared anymore. it doesn't even feel fast to me anymore. everyone that have ever ridden says differently. i need to step it up again.

as for the sohc project i need a trans and some other stuff. its a project on slow prosses

Well its not an MX3 but its close.. turbo 323..

Mods.. B6T swap
2.25" intercooler piping
2.5"-3" intake piping
Blitz BOV
626 intercooler
F2T injectors

Parts still on the shelf needing install
VJ11 turbo
3" magnaflow cat
3" magnaflow muffler

you guys have no idea how long i've been waiting to be on this list.... its an honor to say i have the first and only turbo mx-3 in el paso tx.....


Stock ZE block / Head
Kl-31 ecu
millenia manifold
AiResearch t-04
Tial wastegate .38mm
ebay 12:1 fmu
aremotive AFPR
Walboro 255lpm fuel pump
stock injectors on millenia
stage 2 6 puck clutch


will be on ms soon ...for now at 4 lbs .... spools up very very good im hapy with my results .... total spent 1,800 usd...... post up pix soon


thanks to baby blue mx-3, xxAntwanXX, Andy with the boosted k8, fierro mx, and hgallegos.....


thanks so much for all the help.....

Any new updates for you folks?

I have a ton of parts here to install but I have been busy lately and so has my mech so hopefully I should have something new to post in 2008.