Running low 10's in a Lancer
Running low 10's in a Lancer
Talking to this guy online and he drives a Lancer. He says he's running low 10's in the quarter mile. I think he's full of ****, here is what he had to say:<p>furiousRracer: flowmaster exhaust, 4-2 headers, max air intake, greddy turbo, plus 75 shot wet nos, customs suspension, thicker piston rings, dohc, stage 3 clutch
furiousRracer: im runnin low 10's
furiousRracer: estimated 400hp
furiousRracer: and 460 w/ nos
furiousRracer: im runnin low 10's
furiousRracer: estimated 400hp
furiousRracer: and 460 w/ nos
-
- Senior Member
- Posts: 3338
- Joined: November 25th, 2001, 2:01 am
- Location: california
- Contact:
Re: Running low 10's in a Lancer
<blockquote><font size="1" face="Verdana, Arial">quote:</font><hr>Originally posted by Dephekt:
<p>4-2 headers, max air intake, greddy turbo<hr></blockquote><p>ask him how those header and turbo works together... AND his screen name should already tell you he's BSing.
<p>4-2 headers, max air intake, greddy turbo<hr></blockquote><p>ask him how those header and turbo works together... AND his screen name should already tell you he's BSing.
http://boostedboogie.notanorg.org
- team slideways
92' mazda mx-3 (parting out), 03' bmw 325i, 03' bmw 530i (traded for 325), red FD3S (sold), 2005 cateyes carbon fiber bike
- team slideways
92' mazda mx-3 (parting out), 03' bmw 325i, 03' bmw 530i (traded for 325), red FD3S (sold), 2005 cateyes carbon fiber bike
- cjthor
- Forum Moderator
- Posts: 5018
- Joined: November 26th, 2000, 2:01 am
- Location: Portland Oregon
- Contact:
Re: Running low 10's in a Lancer
<blockquote><font size="1" face="Verdana, Arial">quote:</font><hr>Originally posted by Dephekt:
<p>furiousRracer: flowmaster exhaust, 4-2 headers, max air intake, greddy turbo, plus 75 shot wet nos, customs suspension, thicker piston rings, dohc, stage 3 clutch
furiousRracer: im runnin low 10's
furiousRracer: estimated 400hp
furiousRracer: and 460 w/ nos<hr></blockquote>
Yea I raise the BS flag on this one too..No way hes runnin 10s with just a 75 shot and turbo. Thicker piston rings???
<p>furiousRracer: flowmaster exhaust, 4-2 headers, max air intake, greddy turbo, plus 75 shot wet nos, customs suspension, thicker piston rings, dohc, stage 3 clutch
furiousRracer: im runnin low 10's
furiousRracer: estimated 400hp
furiousRracer: and 460 w/ nos<hr></blockquote>
Yea I raise the BS flag on this one too..No way hes runnin 10s with just a 75 shot and turbo. Thicker piston rings???
Jarid Perry
94 mx3 Turrrbooooo (not even close to stock) 302WHP
71 Chevy C20 (tow rig!!)
77 Jeep CJ5 (no way its stock)
06 MINI Cooper S JCW GP (few goodies) 210WHP
2008 MINI Cooper Clubman S
94 mx3 Turrrbooooo (not even close to stock) 302WHP
71 Chevy C20 (tow rig!!)
77 Jeep CJ5 (no way its stock)
06 MINI Cooper S JCW GP (few goodies) 210WHP
2008 MINI Cooper Clubman S
- millionflame
- Regular Member
- Posts: 960
- Joined: March 4th, 2002, 2:01 am
- Location: Van Island, BC
- Contact:
Re: Running low 10's in a Lancer
Making Lancer's fast isn't all that hard.<p>Making Lancer's go into the 10's is EXTREMELY hard - just like any car.<p>BS on this dude!!!<p>~A
~ Millionflame (94 GS 120K)
-
- Senior Member
- Posts: 2334
- Joined: September 17th, 2001, 2:01 am
- Location: Jacksonville, FL, U.S.
Re: Running low 10's in a Lancer
10's in the 1/8th
Fast imports only come on two wheels.
"MR." Ashley Fowler
'02 Yamaha Warrior (1700cc)
'94 MX-3 RS-t (BPT)~ sold
cardomain pics
"MR." Ashley Fowler
'02 Yamaha Warrior (1700cc)
'94 MX-3 RS-t (BPT)~ sold
cardomain pics
-
- Regular Member
- Posts: 104
- Joined: December 4th, 2001, 2:01 am
- Location: Cambidge, England
- Contact:
Re: Running low 10's in a Lancer
Theres a lancer evo 7 in the UK which runs in the 10s. It got around 77bhp!!!!!!!!!! it can do nearly 200mph
-
- Senior Member
- Posts: 2334
- Joined: September 17th, 2001, 2:01 am
- Location: Jacksonville, FL, U.S.
Re: Running low 10's in a Lancer
missing some numbers on the hp figure??
Fast imports only come on two wheels.
"MR." Ashley Fowler
'02 Yamaha Warrior (1700cc)
'94 MX-3 RS-t (BPT)~ sold
cardomain pics
"MR." Ashley Fowler
'02 Yamaha Warrior (1700cc)
'94 MX-3 RS-t (BPT)~ sold
cardomain pics
-
- Regular Member
- Posts: 104
- Joined: December 4th, 2001, 2:01 am
- Location: Cambidge, England
- Contact:
Re: Running low 10's in a Lancer
oh yea it`s meant to say 770bhp
- Nd4SpdSe
- Senior Member
- Posts: 11212
- Joined: May 25th, 2002, 2:01 am
- Location: Québec City, Quebec, Canada
- Contact:
Re: Running low 10's in a Lancer
<blockquote><font size="1" face="Verdana, Arial">quote:</font><hr>Originally posted by Aiden:
Making Lancer's fast isn't all that hard.<p>Making Lancer's go into the 10's is EXTREMELY hard - just like any car.<hr></blockquote><p> <blockquote><font size="1" face="Verdana, Arial">quote:</font><hr>Originally posted by cre8v mx3:
10's in the 1/8th<hr></blockquote><p>
<p>[ June 21, 2003: Message edited by: Nd4SpdSe ]</p>
Making Lancer's fast isn't all that hard.<p>Making Lancer's go into the 10's is EXTREMELY hard - just like any car.<hr></blockquote><p> <blockquote><font size="1" face="Verdana, Arial">quote:</font><hr>Originally posted by cre8v mx3:
10's in the 1/8th<hr></blockquote><p>
<p>[ June 21, 2003: Message edited by: Nd4SpdSe ]</p>
1992 Mazda Mx-3 GSR - 2.5L KLZE : Award Winning Show Car & Race Car ['02-'09] (Retired)
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
- millionflame
- Regular Member
- Posts: 960
- Joined: March 4th, 2002, 2:01 am
- Location: Van Island, BC
- Contact:
Re: Running low 10's in a Lancer
Laugh all you ****ing want you losers but with all wheel drive traction and their turboed setup it really isn't all that hard.<p>You have no idea how many WRXs and Lancers are out there on the street or track running close to that. They even sell bolt-on kits to get you there.<p>Get a life.<p>~A
~ Millionflame (94 GS 120K)
Re: Running low 10's in a Lancer
I'm not talking about the Evo Lancer, I'm talking about the Lancer that was released in the US about 2 years ago. The toned down grandma and grociers Lancer.
-
- Senior Member
- Posts: 2334
- Joined: September 17th, 2001, 2:01 am
- Location: Jacksonville, FL, U.S.
Re: Running low 10's in a Lancer
<blockquote><font size="1" face="Verdana, Arial">quote:</font><hr>Originally posted by Dephekt:
I'm not talking about the Evo Lancer, I'm talking about the Lancer that was released in the US about 2 years ago. The toned down grandma and grociers Lancer.<hr></blockquote><p>that's what i got from this whole thing. am i the only one???<p>evo's are a different story, but we're NOT talking about them, so.........
I'm not talking about the Evo Lancer, I'm talking about the Lancer that was released in the US about 2 years ago. The toned down grandma and grociers Lancer.<hr></blockquote><p>that's what i got from this whole thing. am i the only one???<p>evo's are a different story, but we're NOT talking about them, so.........
Fast imports only come on two wheels.
"MR." Ashley Fowler
'02 Yamaha Warrior (1700cc)
'94 MX-3 RS-t (BPT)~ sold
cardomain pics
"MR." Ashley Fowler
'02 Yamaha Warrior (1700cc)
'94 MX-3 RS-t (BPT)~ sold
cardomain pics
-
- Regular Member
- Posts: 733
- Joined: January 16th, 2001, 2:01 am
- Location: Niagara Falls, Canada
- Contact:
Re: Running low 10's in a Lancer
i dont know about everyone else, but it seems I can't even read a thread without some immature - half witted, ignorantly worded vulgar response. Not starting anything or looking for support on this, but come on people act at least remotely intelligent.
Tom Alexander
93 MX3 GSR - KLZE / stage 3 clutch / PRM Intake / 2.25" exhaust - dual 3" outlet
full custom black and red interior / KLZE ECU / JE50 VAF
http://home.cogeco.ca/~mx3/ - updated dec 1/03
93 MX3 GSR - KLZE / stage 3 clutch / PRM Intake / 2.25" exhaust - dual 3" outlet
full custom black and red interior / KLZE ECU / JE50 VAF
http://home.cogeco.ca/~mx3/ - updated dec 1/03
-
- Senior Member
- Posts: 3338
- Joined: November 25th, 2001, 2:01 am
- Location: california
- Contact:
Re: Running low 10's in a Lancer
Dephekt suspencted that someone he was talking to was bsing, and we all agreed... and we're not putting the lancer in general down... we're putting down the person and his supposedly 10sec. 'mods'. idno why everyone's so mad?
http://boostedboogie.notanorg.org
- team slideways
92' mazda mx-3 (parting out), 03' bmw 325i, 03' bmw 530i (traded for 325), red FD3S (sold), 2005 cateyes carbon fiber bike
- team slideways
92' mazda mx-3 (parting out), 03' bmw 325i, 03' bmw 530i (traded for 325), red FD3S (sold), 2005 cateyes carbon fiber bike
-
- Regular Member
- Posts: 500
- Joined: April 16th, 2001, 2:01 am
- Location: Lewisville, texas
- Contact:
Re: Running low 10's in a Lancer
i think it was for aidens remarks.
jeremy cline
95 MX-3 RS
The only BPT GTR MX-3 in Texas!!!
man iraq sucks!!!
95 MX-3 RS
The only BPT GTR MX-3 in Texas!!!
man iraq sucks!!!