thanksOriginally posted by rukick:
Josh - I took a look at the pics you have up of your engine. I have to admit it is one of the prettiest things I have ever seen (next to my wife and two daughters of coarse). I hope mine will look as nice when I am done. I have updated my MX3 project plans on my website if anyone is interested. My MX3 project
Also do you know if the G series tranny will bolt up to the 1.6 SOHC, CLutch, and Flywhee if I replaced the other parts you mentioned above.
THanks for the info.
yah the g series should iv heard roumers that you might have to change the bell housing. if i were you, call up Corksport and ask for Derek hes the man that would know for absolutly 100 percent. you can still use your flywheel and clutch, unless you want to swap it up for a bigger one which you will find on any 1.8L.