B6 question
-
- Regular Member
- Posts: 397
- Joined: December 29th, 2002, 2:01 am
- Location: Toronto
B6 question
hey ppl, anyone know of any different ecu's that would fit our cars stock B6 wiring harness for more power?
BP POWERED MX-3
http://members.cardomain.com/bbprecidia
http://members.cardomain.com/bbprecidia
-
- Regular Member
- Posts: 127
- Joined: March 2nd, 2004, 2:01 am
- Location: Fayetteville, AR
Re: B6 question
I'm not sure, but i think you can use the bp ecu and get quite a bit more power. you can use alot of peices off of the bp to get more power, but you know i'm not totally sure.
Thanks-Joe
Thanks-Joe
92 MX-3 1.8L DOHC BP, 17" Konig wheels, 2.5 exuast, custom CAI, inverted style carbon fiber hood, GT-Combat body kit.
- Josh
- Supporting Member
- Posts: 3432
- Joined: April 18th, 2002, 2:01 am
- Location: Washington state
- Contact:
Re: B6 question
if you have the 92-93 sohc then you can swap between the BP. if you have the 94-95, your pretty much screwed. the 94-95 is only swapable to itself. other than a few misc parts like the distributor, injectors and such. but no ECU swap.
Josh
95' AWD MX-3 RST - (work log - http://www.mx-3.com/phpBB3/viewtopic.php?f=46&t=73765 )
94' GS - KLZE DD (work log - viewtopic.php?uid=2713&f=46&t=79063&start=0 )
05' MS RX-8 - Parted out and Sold :'(
Feedback - http://www.mx-3.com/phpBB3/viewtopic.php?f=37&t=49519
Cardomain Page - http://www.cardomain.com/ride/408020
Face Book page http://www.facebook.com/pages/Mazda-MX- ... 3472959216
95' AWD MX-3 RST - (work log - http://www.mx-3.com/phpBB3/viewtopic.php?f=46&t=73765 )
94' GS - KLZE DD (work log - viewtopic.php?uid=2713&f=46&t=79063&start=0 )
05' MS RX-8 - Parted out and Sold :'(
Feedback - http://www.mx-3.com/phpBB3/viewtopic.php?f=37&t=49519
Cardomain Page - http://www.cardomain.com/ride/408020
Face Book page http://www.facebook.com/pages/Mazda-MX- ... 3472959216
-
- Regular Member
- Posts: 397
- Joined: December 29th, 2002, 2:01 am
- Location: Toronto
Re: B6 question
![Crying :crying:](./images/smilies/crying.gif)
ciao
BP POWERED MX-3
http://members.cardomain.com/bbprecidia
http://members.cardomain.com/bbprecidia
Re: B6 question
so i can take any ECU out of a BP and put it in my 92 SOHC and get more power ?
CTC Racing
92 1.6L
93 323 Tranny, ACT clutch, Exhaust, cold air intake, MSD Blaster 2 coil, MSD 8.5mm super conductor wires NGK V-power platinum plugs,engine dress up,custom interior(almost done), GS front bumper, GS 5 spoke wheels Painted white.
92 1.6L
93 323 Tranny, ACT clutch, Exhaust, cold air intake, MSD Blaster 2 coil, MSD 8.5mm super conductor wires NGK V-power platinum plugs,engine dress up,custom interior(almost done), GS front bumper, GS 5 spoke wheels Painted white.
Re: B6 question
NO!!!!!!!!!
don't do it
don't do it
1993 MX-3 GS V6 - Stock
2004 MazdaSpeed MX-5
2004 RX-8 - Project
2004 MazdaSpeed MX-5
2004 RX-8 - Project
-
- Supporting Member
- Posts: 297
- Joined: July 22nd, 2004, 2:01 am
- Location: Minneapolis, MN. USA
- Contact:
Re: B6 question
LOL, YES OR NO!
Because I hate my sohc 92 ECU.
Thankyou ^_^
Because I hate my sohc 92 ECU.
Thankyou ^_^
Re: B6 question
why ? what happends if i do it ? whats bad ?
CTC Racing
92 1.6L
93 323 Tranny, ACT clutch, Exhaust, cold air intake, MSD Blaster 2 coil, MSD 8.5mm super conductor wires NGK V-power platinum plugs,engine dress up,custom interior(almost done), GS front bumper, GS 5 spoke wheels Painted white.
92 1.6L
93 323 Tranny, ACT clutch, Exhaust, cold air intake, MSD Blaster 2 coil, MSD 8.5mm super conductor wires NGK V-power platinum plugs,engine dress up,custom interior(almost done), GS front bumper, GS 5 spoke wheels Painted white.
-
- Senior Member
- Posts: 2334
- Joined: September 17th, 2001, 2:01 am
- Location: Jacksonville, FL, U.S.
Re: B6 question
it's a difference of 200cc. you have a completely different engine that has different needs than a bp motor. the bp has a different pulse width along with a different size injector and is not a good thing on a stock b6 motor. (intake/exhaust is still stock)
the only time you see a benefit from using the bp ecu is when you have internal engine work done or a bp/b6t motor swap. this helps with a better fuel curve to work with.
the only time you see a benefit from using the bp ecu is when you have internal engine work done or a bp/b6t motor swap. this helps with a better fuel curve to work with.
Fast imports only come on two wheels.
"MR." Ashley Fowler
'02 Yamaha Warrior (1700cc)
'94 MX-3 RS-t (BPT)~ sold
cardomain pics
"MR." Ashley Fowler
'02 Yamaha Warrior (1700cc)
'94 MX-3 RS-t (BPT)~ sold
cardomain pics
Re: B6 question
so i would mess my motor up what if i have bigger injectors ?
CTC Racing
92 1.6L
93 323 Tranny, ACT clutch, Exhaust, cold air intake, MSD Blaster 2 coil, MSD 8.5mm super conductor wires NGK V-power platinum plugs,engine dress up,custom interior(almost done), GS front bumper, GS 5 spoke wheels Painted white.
92 1.6L
93 323 Tranny, ACT clutch, Exhaust, cold air intake, MSD Blaster 2 coil, MSD 8.5mm super conductor wires NGK V-power platinum plugs,engine dress up,custom interior(almost done), GS front bumper, GS 5 spoke wheels Painted white.
-
- Senior Member
- Posts: 2334
- Joined: September 17th, 2001, 2:01 am
- Location: Jacksonville, FL, U.S.
Re: B6 question
if you don't have a substantial increase of air coming into the motor, it would run like crap.
Fast imports only come on two wheels.
"MR." Ashley Fowler
'02 Yamaha Warrior (1700cc)
'94 MX-3 RS-t (BPT)~ sold
cardomain pics
"MR." Ashley Fowler
'02 Yamaha Warrior (1700cc)
'94 MX-3 RS-t (BPT)~ sold
cardomain pics
Re: B6 question
so something more then cold air intake, like a turbo or some other type of forced induction ?
CTC Racing
92 1.6L
93 323 Tranny, ACT clutch, Exhaust, cold air intake, MSD Blaster 2 coil, MSD 8.5mm super conductor wires NGK V-power platinum plugs,engine dress up,custom interior(almost done), GS front bumper, GS 5 spoke wheels Painted white.
92 1.6L
93 323 Tranny, ACT clutch, Exhaust, cold air intake, MSD Blaster 2 coil, MSD 8.5mm super conductor wires NGK V-power platinum plugs,engine dress up,custom interior(almost done), GS front bumper, GS 5 spoke wheels Painted white.
-
- Senior Member
- Posts: 2165
- Joined: December 7th, 2002, 2:01 am
- Location: windsor, ontario
- Contact:
Re: B6 question
what about swaping the dohc ecu out for the miata ecu?
ProjectMx
My BP and AWD build thread
Cardomain
93 Mx-3 GS with bp and GTR AWD system
93 Escort GT daily driving
My BP and AWD build thread
Cardomain
93 Mx-3 GS with bp and GTR AWD system
93 Escort GT daily driving
-
- Regular Member
- Posts: 397
- Joined: December 29th, 2002, 2:01 am
- Location: Toronto
Re: B6 question
tru... wud the miata ecu work?
BP POWERED MX-3
http://members.cardomain.com/bbprecidia
http://members.cardomain.com/bbprecidia
Re: B6 question
For the majority of intents and purposes you can not just swap the ECU. VArious sensors and at times full wiring harnesses must be adapted as well.
A miata uses DIS, you would have to swap that over as well to use a Miata ECU. This very likly modifying the wiring harness as of the engine in the mx3 sits transverse.
A miata uses DIS, you would have to swap that over as well to use a Miata ECU. This very likly modifying the wiring harness as of the engine in the mx3 sits transverse.
-torp.
I don't own a Mazda.
I don't own a Mazda.