F.P.R.

[BEERDDWR]

Hey guys need a little help!!!

I asked this in the forced induction form but got no response.

The reason I ask is I need to hook up the control line from the nitrous control box.

Thx for any help!

[BEERDDWR]

NO one

[Josh]

what year is your car? if its 94, 95 there are two sencors that the vac goes into before it goes to the FPR i think. im not 100% sure its been a while since i looked at it. i totally rerouted the vac lines for the turbo.
there is a diagram in the chiltons book. if you cant get ahold of a chiltons book let me know i dig mine out.

[BEERDDWR]

Hey man thx for the reply

Ya I can’t figure it out there are 3 solenoids linked @ two places on the FPR and another vac sensor and valve on the back of the intake all linked together.

I ordered a manual but it will be @ least a week till it comes in.
If you can remember what hose is the main control that I would tap for the nitrous I’d be eternally grateful.
It’s a 96 should be the same as a 95 I think.

Thx again for responding

[BEERDDWR]

Thx guys I got a copy of the manual it turns out that it didn’t mater as the two solenoids are both fed from the same connection to the intake manifold.