![Bow Down :bowdown:](./images/smilies/bowdown.gif)
ticking lifters!?
- The_Great_Tonge
- Regular Member
- Posts: 748
- Joined: August 17th, 2001, 2:01 am
- Location: FL
- Contact:
ticking lifters!?
alright so..they tick!!! but they dont do it all the itme, the 2 times t does it is when i need an oil change, and the when i 1st turn on the car. after a little bit of driving the ticking stops.
so i dont know whats casuing it, any ideaS?
![Bow Down :bowdown:](./images/smilies/bowdown.gif)
Re: ticking lifters!?
get an engine flush and some new oil and that should take care of it(hopefully)
it;s the hla's with not enough oil
it;s the hla's with not enough oil
1993 MX-3 GS V6 - Stock
2004 MazdaSpeed MX-5
2004 RX-8 - Project
2004 MazdaSpeed MX-5
2004 RX-8 - Project
-
- Regular Member
- Posts: 38
- Joined: March 10th, 2003, 2:01 am
- Location: Chicoutimi, québec, Canada.
Re: ticking lifters!?
Put 500ml of AUTOMATIC TRANNY FLUID in your engine oil. The passages for the oil are small and carbon deposits close them a little bit when you have old oil/many miles engine.
Any grade of AUTO fluid is good.
You can run with them in the oil. Drop your oil next oil change.
The auto tranny fluid has many detergents and decrease the deposits very well.
Any grade of AUTO fluid is good.
You can run with them in the oil. Drop your oil next oil change.
The auto tranny fluid has many detergents and decrease the deposits very well.
-1994 GS ENTIRELY STOCK, BUT NOT FOR LONG!-
- mitmaks
- Senior Member
- Posts: 8704
- Joined: September 10th, 2001, 2:01 am
- antispam: ~SPAM*SUX~
- Location: Spokane, WA
- Contact:
Re: ticking lifters!?
ive read on hotrod website NOT to use engine flush (i used it every oil change) since that stuff makes it even worse on your valvetrain/ticking. and ive read that auto tranny fluid does help. ive gotta try myself.Originally posted by Marlon:
get an engine flush and some new oil and that should take care of it(hopefully)
it;s the hla's with not enough oil
Magnum s/s lines, strut bars, carbon fiber bezel, indiglow gauge, Sony Xplod, inverted c/f hood, SRD lower tie bar '93 GS SE '95 Cobra SVT #2722 '68 Charger R/T 440
http://www.cardomain.com/id/mitmaks
![Image](http://img66.exs.cx/img66/9841/390777787yt.jpg)
http://www.cardomain.com/id/mitmaks
![Image](http://img66.exs.cx/img66/9841/390777787yt.jpg)
Re: ticking lifters!?
so it means we can mix the auto tranny fluid with the our engine oil, right?
Re: ticking lifters!?
why whats wrong with it?Originally posted by mitmaks:
ive read on hotrod website NOT to use engine flush (i used it every oil change) since that stuff makes it even worse on your valvetrain/ticking. and ive read that auto tranny fluid does help. ive gotta try myself.Originally posted by Marlon:
get an engine flush and some new oil and that should take care of it(hopefully)
it;s the hla's with not enough oil
why do u use it every oil change?
1993 MX-3 GS V6 - Stock
2004 MazdaSpeed MX-5
2004 RX-8 - Project
2004 MazdaSpeed MX-5
2004 RX-8 - Project
- mitmaks
- Senior Member
- Posts: 8704
- Joined: September 10th, 2001, 2:01 am
- antispam: ~SPAM*SUX~
- Location: Spokane, WA
- Contact:
Re: ticking lifters!?
how many qts of auto fluid do i put in? like 3qts of regular oil and 1qt of auto fluid?
Magnum s/s lines, strut bars, carbon fiber bezel, indiglow gauge, Sony Xplod, inverted c/f hood, SRD lower tie bar '93 GS SE '95 Cobra SVT #2722 '68 Charger R/T 440
http://www.cardomain.com/id/mitmaks
![Image](http://img66.exs.cx/img66/9841/390777787yt.jpg)
http://www.cardomain.com/id/mitmaks
![Image](http://img66.exs.cx/img66/9841/390777787yt.jpg)