STock 4cyl mod's
STock 4cyl mod's
Hey all,
OK, first off i'm not realling thinking of doing a swap as i don't really care about the power any longer just want the appearence. First off i'm going to be rebuilding my engine adding some new parts to it. WOndering what kind of pistons might be or could be used, or if any of you have modified your fuel rails and or ported your headers and ****..?
any help would be great thanked.
just adding more air, little things to push a few more hp out of the engine then add a turbo to the stock 4cyl. but thanks
later
OK, first off i'm not realling thinking of doing a swap as i don't really care about the power any longer just want the appearence. First off i'm going to be rebuilding my engine adding some new parts to it. WOndering what kind of pistons might be or could be used, or if any of you have modified your fuel rails and or ported your headers and ****..?
any help would be great thanked.
just adding more air, little things to push a few more hp out of the engine then add a turbo to the stock 4cyl. but thanks
later
- monty73741
- Forum Moderator
- Posts: 2651
- Joined: February 11th, 2001, 2:01 am
- Location: baltimore,md usa
- Contact:
Re: STock 4cyl mod's
you can swap parts from a miata engine
jason
jason
Jason Danaher
Please Help Support MX-3.com
MX-3.com Online Store - http://www.mx-3.com/osv3
CafePress - http://www.cafepress.com/mx3com
Please Help Support MX-3.com
MX-3.com Online Store - http://www.mx-3.com/osv3
CafePress - http://www.cafepress.com/mx3com
Re: STock 4cyl mod's
if your pay to get a rebuild just get a bp in
it;s a huge diff and be about the same price
it;s a huge diff and be about the same price
1993 MX-3 GS V6 - Stock
2004 MazdaSpeed MX-5
2004 RX-8 - Project
2004 MazdaSpeed MX-5
2004 RX-8 - Project
Re: STock 4cyl mod's
same price as what though, much harder to find those engine and what kinda of HP do they have?
bp... ?such as a b6t?
bp... ?such as a b6t?
Re: STock 4cyl mod's
u can get a j-spec bp for 500 - 1200 and it comes with 130 hp
it will drop right in with your stock tranny u just need an ecu(75) and a harness (150)<p>i'll be selling my ecu and harness in a couple months when i get my haltech
it will drop right in with your stock tranny u just need an ecu(75) and a harness (150)<p>i'll be selling my ecu and harness in a couple months when i get my haltech
1993 MX-3 GS V6 - Stock
2004 MazdaSpeed MX-5
2004 RX-8 - Project
2004 MazdaSpeed MX-5
2004 RX-8 - Project
Re: STock 4cyl mod's
or you can get one from a local junkyard for half theprice... Only real diffrence is milage and if you get a tranny i belive the jspec has lsd.<p>i got a front end clip from a protege lx for 7550 usd.
-torp.
I don't own a Mazda.
I don't own a Mazda.
Re: STock 4cyl mod's
where the hell you guys talking Jspec? isn't it
A-Spec in Toronto? or is Jspec iknow is a japanese importer but is it a store as well?
A-Spec in Toronto? or is Jspec iknow is a japanese importer but is it a store as well?
Re: STock 4cyl mod's
Torpedan, you want to sell your tranny to me? If its 5 speed of course. Hit me on AIM, mx3TT is the name.
Re: STock 4cyl mod's
J-Spec means japanese spec meaning parts that came from Japan.
- papa roached
- Senior Member
- Posts: 2761
- Joined: December 10th, 2002, 2:01 am
- Location: Montgomery, WVa
Re: STock 4cyl mod's
...and they are better :p
93 MX-3 GS (collecting parts for Eunos Presso conversion), 94 626 Transmission (4.10 gears), KL31 camed KL-ZE, Millenia intake, Millenia TB, SSAutochrome V2 headers, Magnaflow cat, 2 1/4 in pipe, Top Speed Pro 1 muffler, 9lb Fidanza Flywheel, ACT clutch, Corksport SS clutch line, Corksport SS brake lines, Unorthadox UDP, 255 lph fuel pump, HEI mod, ghetto-charger intake, KL36 ECU, SRD transverse crossmember bushings, SRD shifter extention bushing, SRD crossmember, Corksport bronzoil shifter bushings, Brembo Crossdrilled and Slotted rotors, 15 inch Konig Heliums, ZX-2 S/R struts, Eibach lowering springs, OEM front strut bar, Ebay rear strut bar, BFGoodrich G-Force T/A KDWs
Parts needing installed: turbo kit from BB (if i ever get it), 9.0:1 CR Diamond pistons, 4340 forged H beam rods, C/J-Spec spoiler, Nissan red tops in KL rails
http://www.cardomain.com/id/blazejeremy
Parts needing installed: turbo kit from BB (if i ever get it), 9.0:1 CR Diamond pistons, 4340 forged H beam rods, C/J-Spec spoiler, Nissan red tops in KL rails
http://www.cardomain.com/id/blazejeremy
Re: STock 4cyl mod's
<blockquote><font size="1" face="Verdana, Arial">quote:</font><hr>Originally posted by mx3TT:
J-Spec means japanese spec meaning parts that came from Japan.<hr></blockquote><p>and with a "j-spec" engine you usally get lower kms like around 50 000km
if you get a engine from a junkyard around here it's gonna have 180km and cost like 1000
(for what i've seen and i searched alot)
J-Spec means japanese spec meaning parts that came from Japan.<hr></blockquote><p>and with a "j-spec" engine you usally get lower kms like around 50 000km
if you get a engine from a junkyard around here it's gonna have 180km and cost like 1000
(for what i've seen and i searched alot)
1993 MX-3 GS V6 - Stock
2004 MazdaSpeed MX-5
2004 RX-8 - Project
2004 MazdaSpeed MX-5
2004 RX-8 - Project
Re: STock 4cyl mod's
i know what jspec is, but is there a japanese auto store in toronto somewhere?
i know of a-spec but i heard there was a jspec store somewhere?
anyone know?
i know of a-spec but i heard there was a jspec store somewhere?
anyone know?
-
- Regular Member
- Posts: 444
- Joined: March 24th, 2002, 2:01 am
- Location: Green Bay, WI
- Contact:
Re: STock 4cyl mod's
dosome checks online.......a j-spec bp is up on ebay currently for 700 i think<p>or go to your mechanic and ask them to get you a used motor under lets say 40,000 miles...should be able to get you one or just ask him for a price of one and you got a good estimate. oh and the lsd can be obtaind i know from corksport so not much of a bother there. other than that arent the engines realativly similar?<p>oh and about j-spec being better not always the case!! doesnt japan have a hp limit?
i got a 90 pgt...but wish it was a mx-3 bp-t!
<img src="http://titan-racing.com/img/tr_site_logo.jpg" alt=" - " />
<img src="http://titan-racing.com/img/tr_site_logo.jpg" alt=" - " />
Re: STock 4cyl mod's
They have a "reportable" hp limit, the Skyline R34 is only suposed to have 290 hp but it is well over 300hp.
65 shot > V8
Re: STock 4cyl mod's
i got my engine from here
http://www.japanautoparts.com/
but i really hate them
they wanted my stock engine when it only had 130,000 km on it so they could rebuild it
i told them to fuc off and i was keeping it
http://www.japanautoparts.com/
but i really hate them
they wanted my stock engine when it only had 130,000 km on it so they could rebuild it
i told them to fuc off and i was keeping it
1993 MX-3 GS V6 - Stock
2004 MazdaSpeed MX-5
2004 RX-8 - Project
2004 MazdaSpeed MX-5
2004 RX-8 - Project