3rd Engine Failure pending
-
- Regular Member
- Posts: 1333
- Joined: December 11th, 2000, 2:01 am
- Location: Saskatoon, SK, Canada
3rd Engine Failure pending
Well, I found my knocking noise. What I thought was drivetrain related is actually motor related. Good old rod knock! The bearings are gone on one of the rods, don't know which one yet though. I won't be able to fix it for another week or two so hopefully I don't need to drive it too much. Worst case scenario is the rod will punch thru the block...guess it is a good thing I still have the B6T block and crank.
Chris Malden
MX-3 RSR
chris.malden@sasktel.net
chris.malden@sasktel.sk.ca
B6T Swap Info |IHI Turbo Sources
MX-3 RSR
chris.malden@sasktel.net
chris.malden@sasktel.sk.ca
B6T Swap Info |IHI Turbo Sources
-
- Senior Member
- Posts: 3338
- Joined: November 25th, 2001, 2:01 am
- Location: california
- Contact:
Re: 3rd Engine Failure pending
man sucks to hear.. but hey maybe this is a sign saying for you to complete that project.
http://boostedboogie.notanorg.org
- team slideways
92' mazda mx-3 (parting out), 03' bmw 325i, 03' bmw 530i (traded for 325), red FD3S (sold), 2005 cateyes carbon fiber bike
- team slideways
92' mazda mx-3 (parting out), 03' bmw 325i, 03' bmw 530i (traded for 325), red FD3S (sold), 2005 cateyes carbon fiber bike
-
- Regular Member
- Posts: 1333
- Joined: December 11th, 2000, 2:01 am
- Location: Saskatoon, SK, Canada
Re: 3rd Engine Failure pending
Too bad that project is far from done, I am still waiting on FM to finish testing the prototype stroker kit. I should be able to pick it up in a couple of months once their race season is done. Hopefully I can just replace the bearings and be done with it, I would like this engine to last as I had no determined time frame for project BP to be completed.
Chris Malden
MX-3 RSR
chris.malden@sasktel.net
chris.malden@sasktel.sk.ca
B6T Swap Info |IHI Turbo Sources
MX-3 RSR
chris.malden@sasktel.net
chris.malden@sasktel.sk.ca
B6T Swap Info |IHI Turbo Sources
-
- Senior Member
- Posts: 3338
- Joined: November 25th, 2001, 2:01 am
- Location: california
- Contact:
Re: 3rd Engine Failure pending
dang. do you have another car to get you around?
http://boostedboogie.notanorg.org
- team slideways
92' mazda mx-3 (parting out), 03' bmw 325i, 03' bmw 530i (traded for 325), red FD3S (sold), 2005 cateyes carbon fiber bike
- team slideways
92' mazda mx-3 (parting out), 03' bmw 325i, 03' bmw 530i (traded for 325), red FD3S (sold), 2005 cateyes carbon fiber bike
-
- Regular Member
- Posts: 1333
- Joined: December 11th, 2000, 2:01 am
- Location: Saskatoon, SK, Canada
Re: 3rd Engine Failure pending
Krista (gf) is my driver when the car is out of commission. If I can pay down my bills and put enough into the new engine, I may look at getting a 2nd vehicle next summer. I would like to get an rps13 or ae86 but I can see those becoming project cars fairly quickly. I really should buy a truck.
Chris Malden
MX-3 RSR
chris.malden@sasktel.net
chris.malden@sasktel.sk.ca
B6T Swap Info |IHI Turbo Sources
MX-3 RSR
chris.malden@sasktel.net
chris.malden@sasktel.sk.ca
B6T Swap Info |IHI Turbo Sources
-
- Senior Member
- Posts: 3338
- Joined: November 25th, 2001, 2:01 am
- Location: california
- Contact:
Re: 3rd Engine Failure pending
my friend bought an ae86 (well the corolla hatch actually) a month ago and i know a few people with some 240sx.. those are really popular project cars. i would go with the ae86.. old school wheels are becoming popular again. there are a few aes for sale on club4ag.com
http://boostedboogie.notanorg.org
- team slideways
92' mazda mx-3 (parting out), 03' bmw 325i, 03' bmw 530i (traded for 325), red FD3S (sold), 2005 cateyes carbon fiber bike
- team slideways
92' mazda mx-3 (parting out), 03' bmw 325i, 03' bmw 530i (traded for 325), red FD3S (sold), 2005 cateyes carbon fiber bike
-
- Regular Member
- Posts: 1333
- Joined: December 11th, 2000, 2:01 am
- Location: Saskatoon, SK, Canada
Re: 3rd Engine Failure pending
I've looked into it a fair bit. Nice Jubiride kit with fender flares and a set of RS Watanabe rims would look mint. Maybe even swaping to the 20V silver top 4age would be inline. Who knows...rps13 would definitely be getting an sr20det. Too many ideas and too little money.
Chris Malden
MX-3 RSR
chris.malden@sasktel.net
chris.malden@sasktel.sk.ca
B6T Swap Info |IHI Turbo Sources
MX-3 RSR
chris.malden@sasktel.net
chris.malden@sasktel.sk.ca
B6T Swap Info |IHI Turbo Sources
-
- Senior Member
- Posts: 3338
- Joined: November 25th, 2001, 2:01 am
- Location: california
- Contact:
Re: 3rd Engine Failure pending
the 20v would be very nice in the ae and you don't see many of these cars driving around compared to the s13/240. id go with that. but the sr20 would be a smoother swap and the sileighty headlights look pretty sweet too on a coupe.
http://boostedboogie.notanorg.org
- team slideways
92' mazda mx-3 (parting out), 03' bmw 325i, 03' bmw 530i (traded for 325), red FD3S (sold), 2005 cateyes carbon fiber bike
- team slideways
92' mazda mx-3 (parting out), 03' bmw 325i, 03' bmw 530i (traded for 325), red FD3S (sold), 2005 cateyes carbon fiber bike
-
- Senior Member
- Posts: 2334
- Joined: September 17th, 2001, 2:01 am
- Location: Jacksonville, FL, U.S.
Re: 3rd Engine Failure pending
IF i sell my car, i'm looking into a s13 sr20 swap. damn, stuff is more expensive than i thought. 2600 for all "engine" parts you need for the s13 sr20 or 3600 for all the "engine" parts on the s14 sr20. this doesn't include all the exhaust, i/c, and i/c piping. plus other misc stuff......
Fast imports only come on two wheels.
"MR." Ashley Fowler
'02 Yamaha Warrior (1700cc)
'94 MX-3 RS-t (BPT)~ sold
cardomain pics
"MR." Ashley Fowler
'02 Yamaha Warrior (1700cc)
'94 MX-3 RS-t (BPT)~ sold
cardomain pics
-
- Senior Member
- Posts: 3338
- Joined: November 25th, 2001, 2:01 am
- Location: california
- Contact:
Re: 3rd Engine Failure pending
deng, you can buy a turbo kit for the ka for that price.
http://boostedboogie.notanorg.org
- team slideways
92' mazda mx-3 (parting out), 03' bmw 325i, 03' bmw 530i (traded for 325), red FD3S (sold), 2005 cateyes carbon fiber bike
- team slideways
92' mazda mx-3 (parting out), 03' bmw 325i, 03' bmw 530i (traded for 325), red FD3S (sold), 2005 cateyes carbon fiber bike
-
- Regular Member
- Posts: 1333
- Joined: December 11th, 2000, 2:01 am
- Location: Saskatoon, SK, Canada
Re: 3rd Engine Failure pending
Supply and demand people, supply and demand.
Chris Malden
MX-3 RSR
chris.malden@sasktel.net
chris.malden@sasktel.sk.ca
B6T Swap Info |IHI Turbo Sources
MX-3 RSR
chris.malden@sasktel.net
chris.malden@sasktel.sk.ca
B6T Swap Info |IHI Turbo Sources
Re: 3rd Engine Failure pending
I'm looking at getting a 10th ann. FC as a second car and using my Mx as a winter car.
Speed Kills - Drive a honda, live forever...
-
- Senior Member
- Posts: 3338
- Joined: November 25th, 2001, 2:01 am
- Location: california
- Contact:
Re: 3rd Engine Failure pending
maldo, there was a 20v with itrb owned by pj bonifacio in a recent super street issue some time ago. it was very nice. there was another itrb 20v ae86 in the latest import racer magazine as well.<p>for the price of some high-quality racing seats, you can get an fc and with the money you saved, you can make it a REALLY nice car.<p>i was looking into getting an 240sx coupe from a friend and doing the sileighty front end. for some reason it just seems sexy to me.. and then putting on a bn sports kit.
http://boostedboogie.notanorg.org
- team slideways
92' mazda mx-3 (parting out), 03' bmw 325i, 03' bmw 530i (traded for 325), red FD3S (sold), 2005 cateyes carbon fiber bike
- team slideways
92' mazda mx-3 (parting out), 03' bmw 325i, 03' bmw 530i (traded for 325), red FD3S (sold), 2005 cateyes carbon fiber bike
-
- Regular Member
- Posts: 1333
- Joined: December 11th, 2000, 2:01 am
- Location: Saskatoon, SK, Canada
Re: 3rd Engine Failure pending
I saw PJ's car, very nice and clean, that is what I like about the S13 and AE86, very clean styles. <p>An FC would be nice, especially with an RE Amemiya widebody kit <p>I like the sileighty conversion quite a bit too, but I do like the pop-up style when the car is done right (a la Yashio Factory) <p>I don't know what I will do. Keeping the MX-3 since there is no way to get back what I have invested, plus it is a fun car. I found a Trueno for $2400cdn in good condition today...too bad I have no money. Maybe next time. I will keep you updated on the money pits.<p>[ July 29, 2003: Message edited by: maldo ]</p>
Chris Malden
MX-3 RSR
chris.malden@sasktel.net
chris.malden@sasktel.sk.ca
B6T Swap Info |IHI Turbo Sources
MX-3 RSR
chris.malden@sasktel.net
chris.malden@sasktel.sk.ca
B6T Swap Info |IHI Turbo Sources
-
- Senior Member
- Posts: 3338
- Joined: November 25th, 2001, 2:01 am
- Location: california
- Contact:
Re: 3rd Engine Failure pending
there are quite a few corollas and ae/truenos out there for sale on club4ag.com and i saw a few other nice project cars on there too.
http://boostedboogie.notanorg.org
- team slideways
92' mazda mx-3 (parting out), 03' bmw 325i, 03' bmw 530i (traded for 325), red FD3S (sold), 2005 cateyes carbon fiber bike
- team slideways
92' mazda mx-3 (parting out), 03' bmw 325i, 03' bmw 530i (traded for 325), red FD3S (sold), 2005 cateyes carbon fiber bike