Need Picture of 90-94 protege LX Tranny Mount

[Methaen]

I am looking for a picture of a 1st generation 90-94 Mazda Protege LX 5 spd transmission mount and bellhousing, trying to fit a tranny from a pro in my 1.6 DOHC mx-3

[David Witherow]

hey they are the same.....i used a tranny mount from the 95 DOHC 4cyl.....mx-3 in my SOHC when i swapped a 98 protege lx in.....but they are the same.......

[marshmallow15]

<blockquote><font size="1" face="Verdana, Arial">quote:</font><hr>Originally posted by caveman:
hey they are the same.....i used a tranny mount from the 95 DOHC 4cyl.....mx-3 in my SOHC when i swapped a 98 protege lx in.....but they are the same.......<hr></blockquote><p>so the 95 dohc 4cyl mount will work with the g-series tranny? i thought the sohc tranny mount worked fine already?

[torpedan]

The rear tranny mount is ALMOST identical... the bolts run the other direction.. you have to use the protege mounts and flip the bolt that runs threw the mount ot make it work.. i can take some pictures when i get a chance will be a while though.

[OsoSlo z28]

ALL the mounts are the same. the only thing needed is the mounting bracket for the side tranny mount. it's located under the battery tray.

[David Witherow]

exactly

[marshmallow15]

yea i thought it was just the transmission bracket we needed. tnx for the info.