20 000$ of Mx3 parts for sale! Project cancelled...
-
- Supporting Member
- Posts: 338
- Joined: June 9th, 2003, 2:01 am
- Location: Quebec
- Contact:
20 000$ of Mx3 parts for sale! Project cancelled...
Hi guys, due to family reasons, I cancelled my mx3 personnal project and decided to invest on my new house instead and for a family size car which will be more convenient than 2 mx3. I have a 92 for sale which will be posted shortly. Here is my 93 that I take everything apart. The ZE has done only 1000 KM since installed, so everything is like new. Here is the complete list:
LIST UPDATED SEPTEMBER 6th 8:45 PM
Autometer Phantom Oil Pressure meters Fuel 2 1/16 gauge (Just installed) 60$CDN
K8 MX3 Manual Tranny 200$CDN
Fidanza Aluminum flywheel 9lbs (1000 km on it, like new) 340$CDN
SRD Rear Aluminum polished rear lower tie bar 120$CDN
Brand new Alternator (1000 km on it) 150$CDN
2 x Used Alternator 50$CDN each
Used Distributor 150$CDN
Distributor (1000 km on it) 200$CDN
SRD E-Brake handle (Brand new never installed) 70$CDN
Momo Red/Chrome Tomahawk shift knob kit with shift boot leather momo 150$CDN
2 x Mazdaspeed Red seatbelt pads pair (Brand new) 20$CDN each
Black Racing 4 points Harness pair (Brand new) 120$CDN
Sony CD/MP3 Xplod player with remote like new 130$CDN
G-force Street kit both side skirts 300$
G-force Street kit rear bumper 300$
G-force Scorpion Z3 fiberglass fenders (Brand new just installed, On gel coat) 380$CDN
G-Force Scorpion fiberglass hood (Brand new just installed, On gel coat) 400$CDN
Sparco Hood pins 40$CDN
Eurolite Chrome Fog Lights H3 dual with integrated LED Flashers and full kit 60$CDN
Headlights with custom built in flashers 160$CDN
New Timing Belt Tensioner Arm Hydrolic 150$CDN
Complete set of used KLZE HLA's (Replacement) 60$CDN
2 x Oil Pan Gaskets (Brand new) 10$CDN each
2 x Oil Pan (Good shape no rust) 40$CDN each
Double Gaugepod Brand new 65$CDN
Stock Pillar pod pair regular seatbelt 40$CDN
Stock Pillar pod pair Auto seatbelt 40$CDN
Nippon Racing Brand new Chrome Mags 17" 4 x 100, 4 x 125 pattern 1000$CDN
Terminator T2 brand new JSP spoiler on primer with led 250$CDN
Rear hatch shade original lexan black with mounting kit and brackets 250$CDN
Fx Designs Serie 2 Hood Scoop Ready to prime and paint 100$CDN
Front black interior door panels (Stock color) 80$CDN
Rear black interior side panels (Stock color) 60$CDN
Trunk side panel passenger 20$CDN
Trunk hatch trims 20$CDN
Trunk speakers trims 40$CDN
Grill for bumper 4 - 5 rolls brand new 40$CDN
Momo Steering Hub adaptor for mx3 (Brand new) 80$CDN
H3 high intensity light bulb (Brand new) 20$CDN
5 x Micro LEDs Mood 12V lights Red (Brand new) 25$CDN
2 x Area Micro triple LEDs Mood 12 light Red (Brand new) 20$CDN
Liteglow Neon Red Crusin Lights Red for headlights (Brand new) 30$CDN
OBX Fire Extinguisher Chrome with support (Brand new) 60$CDN
Titanium Mtec Wipers Pair Silver (Brand new) 40$
Interior rear view mirror billet aluminum polished (Brand new) 100$CDN
Aluminum polished chrome Mx3 License plate frame (Brand new) 20$CDN
Electric high output dual horn Red / Chrome with kit and relays (Brand new) 40$CDN
Foliatec Red Galiper Paint kit (Brand new) 45$CDN
3 x Fuel rails with injectors 60$CDN each
Rear Trunk Black carpet 20$CDN
Regular lugnuts for Mx3 x12 (Brand new) 20$CDN
2 x Tuner (4) lock nuts with key chrome (Brand new) 20$CDN each
Stock GS 93 Accordeon pipe air Intake 20$CDN
2 x LED Washing Nozzles and wiring used 10$CDN
Taylor Coil Wire Red 10$CDN
Chrome Tires Valve Steams Billet Aluminum (Brand new) 10$
Used Timing Belt 20$CDN
Front Bumper stock upper grill 10$CDN
Ferrari Tweeters FX series pair 40$CDN
Black Windows film tint (Various) 5$CDN
Rear GS 93 Lower tie bar oem 40$CDN
K8 GS 93 ECu Computer 60$CDN
2 x Timing Belt Hydrolic Tensioner 40$CDN each
6 x Vibrant Blue 2.5 x 2.5 Rubber adaptor 10$CDN each
Vibrant Red reinforces 2.75 x 2.75 Rubber adaptor 10$CDN
2 x Missile Nitro switch Red (Brand new) 10$CDN each
Mx3 Roof Ceiling interior trim very clean 40$CDN
Mx3 Roof Ceiling interior trim very clean 20$CDN
Sunroof motor with system 50$CDN
Rear hatch with glass 100$CDN
Front wipers and motor 50$CDN
Front windshield washer tank and pump 20$CDN
Rear windshield washer tank and pump 20$CDN
Electric Side mirrors Red 80$CDN
sun shade both sides 20$CDN
Front Bumper support 80$CDN
Rear bumper support 80$CDN
Grand Am 1988 75 000 KM Body with rust, need minor tune up, comes with 4 summer tires & 4 winter tires (2 brand new) 500$
you can contact me at sales@psituning.ca
thank you,
<small>[ September 06, 2004, 07:48 PM: Message edited by: Street-Import ]</small>
LIST UPDATED SEPTEMBER 6th 8:45 PM
Autometer Phantom Oil Pressure meters Fuel 2 1/16 gauge (Just installed) 60$CDN
K8 MX3 Manual Tranny 200$CDN
Fidanza Aluminum flywheel 9lbs (1000 km on it, like new) 340$CDN
SRD Rear Aluminum polished rear lower tie bar 120$CDN
Brand new Alternator (1000 km on it) 150$CDN
2 x Used Alternator 50$CDN each
Used Distributor 150$CDN
Distributor (1000 km on it) 200$CDN
SRD E-Brake handle (Brand new never installed) 70$CDN
Momo Red/Chrome Tomahawk shift knob kit with shift boot leather momo 150$CDN
2 x Mazdaspeed Red seatbelt pads pair (Brand new) 20$CDN each
Black Racing 4 points Harness pair (Brand new) 120$CDN
Sony CD/MP3 Xplod player with remote like new 130$CDN
G-force Street kit both side skirts 300$
G-force Street kit rear bumper 300$
G-force Scorpion Z3 fiberglass fenders (Brand new just installed, On gel coat) 380$CDN
G-Force Scorpion fiberglass hood (Brand new just installed, On gel coat) 400$CDN
Sparco Hood pins 40$CDN
Eurolite Chrome Fog Lights H3 dual with integrated LED Flashers and full kit 60$CDN
Headlights with custom built in flashers 160$CDN
New Timing Belt Tensioner Arm Hydrolic 150$CDN
Complete set of used KLZE HLA's (Replacement) 60$CDN
2 x Oil Pan Gaskets (Brand new) 10$CDN each
2 x Oil Pan (Good shape no rust) 40$CDN each
Double Gaugepod Brand new 65$CDN
Stock Pillar pod pair regular seatbelt 40$CDN
Stock Pillar pod pair Auto seatbelt 40$CDN
Nippon Racing Brand new Chrome Mags 17" 4 x 100, 4 x 125 pattern 1000$CDN
Terminator T2 brand new JSP spoiler on primer with led 250$CDN
Rear hatch shade original lexan black with mounting kit and brackets 250$CDN
Fx Designs Serie 2 Hood Scoop Ready to prime and paint 100$CDN
Front black interior door panels (Stock color) 80$CDN
Rear black interior side panels (Stock color) 60$CDN
Trunk side panel passenger 20$CDN
Trunk hatch trims 20$CDN
Trunk speakers trims 40$CDN
Grill for bumper 4 - 5 rolls brand new 40$CDN
Momo Steering Hub adaptor for mx3 (Brand new) 80$CDN
H3 high intensity light bulb (Brand new) 20$CDN
5 x Micro LEDs Mood 12V lights Red (Brand new) 25$CDN
2 x Area Micro triple LEDs Mood 12 light Red (Brand new) 20$CDN
Liteglow Neon Red Crusin Lights Red for headlights (Brand new) 30$CDN
OBX Fire Extinguisher Chrome with support (Brand new) 60$CDN
Titanium Mtec Wipers Pair Silver (Brand new) 40$
Interior rear view mirror billet aluminum polished (Brand new) 100$CDN
Aluminum polished chrome Mx3 License plate frame (Brand new) 20$CDN
Electric high output dual horn Red / Chrome with kit and relays (Brand new) 40$CDN
Foliatec Red Galiper Paint kit (Brand new) 45$CDN
3 x Fuel rails with injectors 60$CDN each
Rear Trunk Black carpet 20$CDN
Regular lugnuts for Mx3 x12 (Brand new) 20$CDN
2 x Tuner (4) lock nuts with key chrome (Brand new) 20$CDN each
Stock GS 93 Accordeon pipe air Intake 20$CDN
2 x LED Washing Nozzles and wiring used 10$CDN
Taylor Coil Wire Red 10$CDN
Chrome Tires Valve Steams Billet Aluminum (Brand new) 10$
Used Timing Belt 20$CDN
Front Bumper stock upper grill 10$CDN
Ferrari Tweeters FX series pair 40$CDN
Black Windows film tint (Various) 5$CDN
Rear GS 93 Lower tie bar oem 40$CDN
K8 GS 93 ECu Computer 60$CDN
2 x Timing Belt Hydrolic Tensioner 40$CDN each
6 x Vibrant Blue 2.5 x 2.5 Rubber adaptor 10$CDN each
Vibrant Red reinforces 2.75 x 2.75 Rubber adaptor 10$CDN
2 x Missile Nitro switch Red (Brand new) 10$CDN each
Mx3 Roof Ceiling interior trim very clean 40$CDN
Mx3 Roof Ceiling interior trim very clean 20$CDN
Sunroof motor with system 50$CDN
Rear hatch with glass 100$CDN
Front wipers and motor 50$CDN
Front windshield washer tank and pump 20$CDN
Rear windshield washer tank and pump 20$CDN
Electric Side mirrors Red 80$CDN
sun shade both sides 20$CDN
Front Bumper support 80$CDN
Rear bumper support 80$CDN
Grand Am 1988 75 000 KM Body with rust, need minor tune up, comes with 4 summer tires & 4 winter tires (2 brand new) 500$
you can contact me at sales@psituning.ca
thank you,
<small>[ September 06, 2004, 07:48 PM: Message edited by: Street-Import ]</small>
Re: 20 000$ of Mx3 parts for sale! Project cancelled...
i want the speedhut hvac panel> payment will be sent as soon as you can give me details and a cost for shipping.
i also want:
spectre silicone hose kit
stainless steel clutch line
chrome polished lighter
ractive chrome front strut
thanks
<small>[ August 24, 2004, 09:51 AM: Message edited by: BADMX3 ]</small>
i also want:
spectre silicone hose kit
stainless steel clutch line
chrome polished lighter
ractive chrome front strut
thanks
<small>[ August 24, 2004, 09:51 AM: Message edited by: BADMX3 ]</small>
check my car domain
http://www.cardomain.com/ride/2144443
http://www.cardomain.com/ride/2144443
Re: 20 000$ of Mx3 parts for sale! Project cancelled...
Don`t have any o2 sensors?
Lots of stuff here I really want... but my MX didnt pass emissionstest... might be bad o2 sensors.
Also need lefthand rear caliper, bah...
nope-mx3
Lots of stuff here I really want... but my MX didnt pass emissionstest... might be bad o2 sensors.
Also need lefthand rear caliper, bah...
nope-mx3
:: 2001 Mazda Mx-5 Sport // 2013 Volvo V40 D2 Momentum ::
Re: 20 000$ of Mx3 parts for sale! Project cancelled...
hey, do you have a radiator off of your 93 mx?
and if you do.. how much shipped to Toronto, Ontario!
thanks.
and if you do.. how much shipped to Toronto, Ontario!
thanks.
- GreenMachine
- Regular Member
- Posts: 91
- Joined: December 6th, 2003, 2:01 am
- Location: Oakley
Re: 20 000$ of Mx3 parts for sale! Project cancelled...
Do you have pics of the headlights??
'92 GS-no lip. Klze. no cat. phenolic spacers. no power steering. no a/c. hei mod. poly filled mounts. probinator chip. loud exhaust. b&m shifter. tokico struts. suspension tech springs. axxis 17 in rims.
'86 mr2-stock and still hauls a-- in curves.
'05 Gsxr-50 tooth stunt bike
'86 mr2-stock and still hauls a-- in curves.
'05 Gsxr-50 tooth stunt bike
Re: 20 000$ of Mx3 parts for sale! Project cancelled...
I want dibs on the headers, have they been fitted to the mx-3?
65 shot > V8
-
- Regular Member
- Posts: 554
- Joined: January 3rd, 2004, 2:01 am
- Location: Ottawa, Ontario
- Contact:
Re: 20 000$ of Mx3 parts for sale! Project cancelled...
I WANT THE ROTORS!!!!!!!!! ANd I have paypal!!! lol
Tyson
Tyson
My Car Domain Page:
http://www.cardomain.com/memberpage/496099
Take a Look, leave a comment, and don't forget to vote.
http://www.cardomain.com/memberpage/496099
Take a Look, leave a comment, and don't forget to vote.
Re: 20 000$ of Mx3 parts for sale! Project cancelled...
I want the SRD front crossmember + SRD front control arm bushings, and, Gforce front strutbar.
Hope shipping isnt too expensive.
Not too heavy and big items, so should be ok to ship overseas.
nope-mx3
Hope shipping isnt too expensive.
Not too heavy and big items, so should be ok to ship overseas.
nope-mx3
:: 2001 Mazda Mx-5 Sport // 2013 Volvo V40 D2 Momentum ::
-
- Regular Member
- Posts: 207
- Joined: February 29th, 2004, 2:01 am
- Location: calgary
Re: 20 000$ of Mx3 parts for sale! Project cancelled...
i want:
- SRD Bushings Bronzoil
- shiftlinkage if u got it
tbx
- SRD Bushings Bronzoil
- shiftlinkage if u got it
tbx
-
- Regular Member
- Posts: 554
- Joined: January 3rd, 2004, 2:01 am
- Location: Ottawa, Ontario
- Contact:
Re: 20 000$ of Mx3 parts for sale! Project cancelled...
I'll also take the OBX muffler (How does it sound???) ANd the Ractive rear strut bar. Both are for sure. AS are the rotors (we've talked about these b4).
Now as for the headers and everything needed to set up a KLZE...what can you hook me up with. I could probably even come to pick it up. This isn't for sure, it's just that I kno I'll be doing a swap, and this may be the perfect oppertunity!
WHat color is the ceiling and trim?
Is the SPARCO gas cap just the cap? Or is it the entire gas door/cap assembly?
I'll also probably take the rad, and oil caps.
Can I get pics of the wheels?
And possibly the fire extinguisher
Tyson
Now as for the headers and everything needed to set up a KLZE...what can you hook me up with. I could probably even come to pick it up. This isn't for sure, it's just that I kno I'll be doing a swap, and this may be the perfect oppertunity!
WHat color is the ceiling and trim?
Is the SPARCO gas cap just the cap? Or is it the entire gas door/cap assembly?
I'll also probably take the rad, and oil caps.
Can I get pics of the wheels?
And possibly the fire extinguisher
Tyson
My Car Domain Page:
http://www.cardomain.com/memberpage/496099
Take a Look, leave a comment, and don't forget to vote.
http://www.cardomain.com/memberpage/496099
Take a Look, leave a comment, and don't forget to vote.
-
- Supporting Member
- Posts: 338
- Joined: June 9th, 2003, 2:01 am
- Location: Quebec
- Contact:
Re: 20 000$ of Mx3 parts for sale! Project cancelled...
I do have 2 good O2 sensors for sale
Yes I have the Radiator for the 93 GS, its in great shape and shipping should be around 30 - 40$ I suppose CDN
Please email me for details and pics, I have too many post from all the boards and I have a hard time to keep up with everyone. So if you want a quick anwser please email me sales@psituning.ca
The headers are currently installed, I had them for 1000 KM, they fit perfect and comes with a high flow cat vibrant welded at the downpipe. Made of Stailess. 2.5"
The rotors are still available. They are like new only 1000 km on them.
I do have the shift linkage, please make me an offer by email. The bushing I would prefer to sell them with the shifter and extension rod bushing all together. So it require less time to take everything apart.
The ones that already emailed me, I will reply right now toa ll your questions and send pictures.
thanks everyone
Pat
Yes I have the Radiator for the 93 GS, its in great shape and shipping should be around 30 - 40$ I suppose CDN
Please email me for details and pics, I have too many post from all the boards and I have a hard time to keep up with everyone. So if you want a quick anwser please email me sales@psituning.ca
The headers are currently installed, I had them for 1000 KM, they fit perfect and comes with a high flow cat vibrant welded at the downpipe. Made of Stailess. 2.5"
The rotors are still available. They are like new only 1000 km on them.
I do have the shift linkage, please make me an offer by email. The bushing I would prefer to sell them with the shifter and extension rod bushing all together. So it require less time to take everything apart.
The ones that already emailed me, I will reply right now toa ll your questions and send pictures.
thanks everyone
Pat
Re: 20 000$ of Mx3 parts for sale! Project cancelled...
I got dibs on the crossmember, control arm bushings, o2 sensors, and the gforce front strutbar.
nope-mx3
nope-mx3
:: 2001 Mazda Mx-5 Sport // 2013 Volvo V40 D2 Momentum ::
- babyblueMX3
- Supporting Member
- Posts: 3755
- Joined: February 23rd, 2003, 2:01 am
- Location: Gatineau,Quebec,Canada
- Contact:
Re: 20 000$ of Mx3 parts for sale! Project cancelled...
Pat just an idea for you...when you sell something you should update your list on top so you don't get the same questions over an over
RIP 400whp ZE-T MX-3
Current car : Golf 01 GTI 1.8T (15 psi)
Current car : Golf 01 GTI 1.8T (15 psi)
-
- Regular Member
- Posts: 554
- Joined: January 3rd, 2004, 2:01 am
- Location: Ottawa, Ontario
- Contact:
Re: 20 000$ of Mx3 parts for sale! Project cancelled...
Hey PAt.
My hotmail is down right now. I IM'd you for now. Hopefully we can meet up sometime this week for a purchase
~Tyson
My hotmail is down right now. I IM'd you for now. Hopefully we can meet up sometime this week for a purchase
~Tyson
My Car Domain Page:
http://www.cardomain.com/memberpage/496099
Take a Look, leave a comment, and don't forget to vote.
http://www.cardomain.com/memberpage/496099
Take a Look, leave a comment, and don't forget to vote.
Re: 20 000$ of Mx3 parts for sale! Project cancelled...
I left you a message on PT about the headers, just need some idea on shipping. The zip is 27284, let me know.
Steve
Steve
65 shot > V8