broken pieces in mij intake cams full of cooling liquid

V6 Technical/Performance Discussions
Post Reply
lucifernl
Regular Member
Posts: 42
Joined: November 21st, 2012, 2:25 pm
antispam: ~SPAM*SUX~

broken pieces in mij intake cams full of cooling liquid

Post by lucifernl »

hi all.


i have a big problem.

coolant was comming out of my exhoust.

i took the valve cover off en everywhere whas cooland liquid.
i take my intake off and i find pieces of broken metal parts.
does sombody knows what this is broken off from?

Image

Image

also took my cams out for revision of the hla`s
found a broken 1

Image

greetings kevin
RobMinhas
Regular Member
Posts: 1614
Joined: November 5th, 2011, 8:32 pm
antispam: ~SPAM*SUX~
Location: Calgary, Alberta

Re: broken pieces in mij intake cams full of cooling liquid

Post by RobMinhas »

Wow, that broken valve spring retainer got wrecked.

And that piece found it's way into the top of the head? Are there any holes large enough to accommodate it? Was it jammed in between something when you found it?

The only holes i can think of that are big enough are the intake and exhaust ports so it seems your intake may have fialed and had that piece break and fall in through an intake port and where it broke a coolant line also ended up seeping fluid into it.
Daninski wrote:This is my MX3. There are many like it, but this one is mine. My MX3 is my best friend. It is my life. I must master it as I master my life. My MX3, without me, is useless. Without my MX3, I am useless. I must fire up my MX3 true. I must drive straighter than any Honda driver who is trying to own me. I must own him before he owns me.
lucifernl
Regular Member
Posts: 42
Joined: November 21st, 2012, 2:25 pm
antispam: ~SPAM*SUX~

Re: broken pieces in mij intake cams full of cooling liquid

Post by lucifernl »

i found those pieces just a few cm in my intake right behind my trottle body.
RobMinhas
Regular Member
Posts: 1614
Joined: November 5th, 2011, 8:32 pm
antispam: ~SPAM*SUX~
Location: Calgary, Alberta

Re: broken pieces in mij intake cams full of cooling liquid

Post by RobMinhas »

Ah I misunderstood, I thought the piece was found in the cylinder head not intake.

And I don't recognize that metal piece, is there any chance you might have sucked it in through your air filter?
Daninski wrote:This is my MX3. There are many like it, but this one is mine. My MX3 is my best friend. It is my life. I must master it as I master my life. My MX3, without me, is useless. Without my MX3, I am useless. I must fire up my MX3 true. I must drive straighter than any Honda driver who is trying to own me. I must own him before he owns me.
lucifernl
Regular Member
Posts: 42
Joined: November 21st, 2012, 2:25 pm
antispam: ~SPAM*SUX~

Re: broken pieces in mij intake cams full of cooling liquid

Post by lucifernl »

the car was runing then i heard a breaking noise i shut the engine off and start looking then i found the metal pecies.

also 1 spark plug whas the tip hit and it whas bended not broken.
User avatar
Inodoro Pereyra
Senior Member
Posts: 2067
Joined: March 11th, 2009, 3:44 pm
Location: Back in Buenos Aires, Argentina

Re: broken pieces in mij intake cams full of cooling liquid

Post by Inodoro Pereyra »

RobMinhas wrote:And I don't recognize that metal piece, is there any chance you might have sucked it in through your air filter?
Which one? The one on his hand looks like half a valve seat. The one in the last pic is a broken retainer.

You gotta love Mazda engines. What other engine could ssurvive that damage? :love:
U28sIG5vdyB5b3UgYWxzbyBrbm93IGJhc2UgNjQuLi5odWg/DQpTSE9XIE9GRiEhIQ==

"The more I know man, the more I love my dog."

Diogenes of Sinope.
User avatar
WhiteFinish
Regular Member
Posts: 1635
Joined: April 3rd, 2006, 9:48 am
Location: Netherlands
Contact:

Re: broken pieces in mij intake cams full of cooling liquid

Post by WhiteFinish »

I hope its not the valve seat...
would that be fixable ?
Just another Mx3 freak :)

Feedback topic: Click

Worklog
Worklog click
User avatar
Inodoro Pereyra
Senior Member
Posts: 2067
Joined: March 11th, 2009, 3:44 pm
Location: Back in Buenos Aires, Argentina

Re: broken pieces in mij intake cams full of cooling liquid

Post by Inodoro Pereyra »

Depends on what the damage is inside the cylinder. It's a safe bet that the heaad is probably scrap. I don't know about the piston and the cylinder wall... :shrug:
U28sIG5vdyB5b3UgYWxzbyBrbm93IGJhc2UgNjQuLi5odWg/DQpTSE9XIE9GRiEhIQ==

"The more I know man, the more I love my dog."

Diogenes of Sinope.
User avatar
marcdh
Regular Member
Posts: 1460
Joined: July 26th, 2006, 3:54 pm
Location: Belfast -Northern Ireland
Contact:

Re: broken pieces in mij intake cams full of cooling liquid

Post by marcdh »

Belt valve stem for first one? Looks fairly catastrophic! Unlucky.
AZ-3 1498cc Turbo! EVO 8 turbo and manifold, 5 stud swap, SSR Type C, DIYPNP seq Megasquirt
Mx-3 2.5 V6 Turbo 291 BHP 251 lbft @ 8psi - Retired due to rust and back at uni
View Worklog
Image
User avatar
WhiteFinish
Regular Member
Posts: 1635
Joined: April 3rd, 2006, 9:48 am
Location: Netherlands
Contact:

Re: broken pieces in mij intake cams full of cooling liquid

Post by WhiteFinish »

Today we took off the head...

Carnage... :freak:

Dropped valve, big hole in piston #6, cilinder heavily damaged
Cilinder #4 cracked about 1" down.
Just another Mx3 freak :)

Feedback topic: Click

Worklog
Worklog click
User avatar
Inodoro Pereyra
Senior Member
Posts: 2067
Joined: March 11th, 2009, 3:44 pm
Location: Back in Buenos Aires, Argentina

Re: broken pieces in mij intake cams full of cooling liquid

Post by Inodoro Pereyra »

Ouch! :(

I see a new engine in your future...
U28sIG5vdyB5b3UgYWxzbyBrbm93IGJhc2UgNjQuLi5odWg/DQpTSE9XIE9GRiEhIQ==

"The more I know man, the more I love my dog."

Diogenes of Sinope.
lucifernl
Regular Member
Posts: 42
Joined: November 21st, 2012, 2:25 pm
antispam: ~SPAM*SUX~

Re: broken pieces in mij intake cams full of cooling liquid

Post by lucifernl »

cilinder 4 cracked

Image


cilinder 6 broken retrainer valve dropped

Image
Post Reply

Return to “V6 Technical/Performance”