Since my '92 is off the road for a while, I'm planning some engine bay beautification while she "rests" in the driveway.
Wiretuck
Powdercoated valvecovers and fuel rails
Slimfans
Battery relocation
Stainless bolts for the intake manifold, valvecovers, and throttle body.
- I'm not dead set on the allenheads for the IM, since the studs on either side would create a "mismatched" look.
Has anybody here attempted this previously? Besides pile_of_Rd1 of course, I've been able to gather some info from his worklogs already.
Stainless Allenhead bolts
-
MrMazda92
- Supporting Member
- Posts: 5203
- Joined: October 8th, 2009, 5:35 pm
- antispam: No
- Location: Midwest
Stainless Allenhead bolts
Daily:
'12 Challenger R/T - Stroker (Fully Counterweighted), Magnuson 2650 blower (7 PSI), Skip-Shift/CDV deleted, StopTech ST60 front brakes, Hellcat rear cradle, 2 piece DS. 6 speed, 3.9 LSD, 18" wheels - 510 WHP
Kid Hauler:
'08 Suburban LT 4WD - TVS 1900 Blower, LF cam, headers, AFM delete, true 5" lift, 33x12s, 523 WHP
First Love:
'92 GS 5 spd - Straightneck KL/67mm TB, MS/Coilpacks, 5 lugs/Speed6 brakes/FD wheels, wiretuck, coilovers, headers, AEM WB, Borla
Deleted: VAF/Power Steering/Air Conditioning/EGR/ABS/Auto Seatbelts/etc
'12 Challenger R/T - Stroker (Fully Counterweighted), Magnuson 2650 blower (7 PSI), Skip-Shift/CDV deleted, StopTech ST60 front brakes, Hellcat rear cradle, 2 piece DS. 6 speed, 3.9 LSD, 18" wheels - 510 WHP
Kid Hauler:
'08 Suburban LT 4WD - TVS 1900 Blower, LF cam, headers, AFM delete, true 5" lift, 33x12s, 523 WHP
First Love:
'92 GS 5 spd - Straightneck KL/67mm TB, MS/Coilpacks, 5 lugs/Speed6 brakes/FD wheels, wiretuck, coilovers, headers, AEM WB, Borla
Deleted: VAF/Power Steering/Air Conditioning/EGR/ABS/Auto Seatbelts/etc